New URL for NEMO forge! http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.

sbccpl.F90 in NEMO/branches/2019/dev_r11943_MERGE_2019/src/OCE/SBC – NEMO

Context Navigation

source: NEMO/branches/2019/dev_r11943_MERGE_2019/src/OCE/SBC/sbccpl.F90 @ 12252

Last change on this file since 12252 was 12252, checked in by smasson, 4 years ago
rev12240_dev_r11943_MERGE_2019: same as [12251], merge trunk 12072:12248, all sette tests ok, GYRE_PISCES, AMM12, ISOMIP, VORTEX intentical to 12236
Property svn:keywords set to `Id`
File size: 155.0 KB

Rev	Line
[888]	1	MODULE sbccpl
	2	!!======================================================================
	3	!! * MODULE sbccpl *
[1218]	4	!! Surface Boundary Condition : momentum, heat and freshwater fluxes in coupled mode
	5	!!======================================================================
[2528]	6	!! History : 2.0 ! 2007-06 (R. Redler, N. Keenlyside, W. Park) Original code split into flxmod & taumod
	7	!! 3.0 ! 2008-02 (G. Madec, C Talandier) surface module
	8	!! 3.1 ! 2009_02 (G. Madec, S. Masson, E. Maisonave, A. Caubel) generic coupled interface
[3294]	9	!! 3.4 ! 2011_11 (C. Harris) more flexibility + multi-category fields
[888]	10	!!----------------------------------------------------------------------
[9019]	11
[888]	12	!!----------------------------------------------------------------------
[1218]	13	!! namsbc_cpl : coupled formulation namlist
	14	!! sbc_cpl_init : initialisation of the coupled exchanges
	15	!! sbc_cpl_rcv : receive fields from the atmosphere over the ocean (ocean only)
	16	!! receive stress from the atmosphere over the ocean (ocean-ice case)
	17	!! sbc_cpl_ice_tau : receive stress from the atmosphere over ice
	18	!! sbc_cpl_ice_flx : receive fluxes from the atmosphere over ice
	19	!! sbc_cpl_snd : send fields to the atmosphere
[888]	20	!!----------------------------------------------------------------------
[7646]	21	USE dom_oce ! ocean space and time domain
	22	USE sbc_oce ! Surface boundary condition: ocean fields
	23	USE trc_oce ! share SMS/Ocean variables
	24	USE sbc_ice ! Surface boundary condition: ice fields
	25	USE sbcapr ! Stochastic param. : ???
	26	USE sbcdcy ! surface boundary condition: diurnal cycle
	27	USE sbcwave ! surface boundary condition: waves
	28	USE phycst ! physical constants
[12150]	29	USE isf_oce , ONLY : l_isfoasis, fwfisf_oasis ! ice shelf boundary condition
[9570]	30	#if defined key_si3
[6140]	31	USE ice ! ice variables
[1218]	32	#endif
[6140]	33	USE cpl_oasis3 ! OASIS3 coupling
	34	USE geo2ocean !
[11949]	35	USE oce , ONLY : ts, uu, vv, ssh, fraqsr_1lev
[9019]	36	USE ocealb !
[6140]	37	USE eosbn2 !
[9019]	38	USE sbcrnf , ONLY : l_rnfcpl
[3294]	39	#if defined key_cice
	40	USE ice_domain_size, only: ncat
	41	#endif
[9570]	42	#if defined key_si3
[9019]	43	USE icethd_dh ! for CALL ice_thd_snwblow
[5407]	44	#endif
[6140]	45	!
	46	USE in_out_manager ! I/O manager
	47	USE iom ! NetCDF library
	48	USE lib_mpp ! distribued memory computing library
	49	USE lbclnk ! ocean lateral boundary conditions (or mpp link)
[5407]	50
[1218]	51	IMPLICIT NONE
	52	PRIVATE
[5407]	53
[6140]	54	PUBLIC sbc_cpl_init ! routine called by sbcmod.F90
[9019]	55	PUBLIC sbc_cpl_rcv ! routine called by icestp.F90
[6140]	56	PUBLIC sbc_cpl_snd ! routine called by step.F90
[9019]	57	PUBLIC sbc_cpl_ice_tau ! routine called by icestp.F90
	58	PUBLIC sbc_cpl_ice_flx ! routine called by icestp.F90
[6140]	59	PUBLIC sbc_cpl_alloc ! routine called in sbcice_cice.F90
[2715]	60
[6140]	61	INTEGER, PARAMETER :: jpr_otx1 = 1 ! 3 atmosphere-ocean stress components on grid 1
	62	INTEGER, PARAMETER :: jpr_oty1 = 2 !
	63	INTEGER, PARAMETER :: jpr_otz1 = 3 !
	64	INTEGER, PARAMETER :: jpr_otx2 = 4 ! 3 atmosphere-ocean stress components on grid 2
	65	INTEGER, PARAMETER :: jpr_oty2 = 5 !
	66	INTEGER, PARAMETER :: jpr_otz2 = 6 !
	67	INTEGER, PARAMETER :: jpr_itx1 = 7 ! 3 atmosphere-ice stress components on grid 1
	68	INTEGER, PARAMETER :: jpr_ity1 = 8 !
	69	INTEGER, PARAMETER :: jpr_itz1 = 9 !
	70	INTEGER, PARAMETER :: jpr_itx2 = 10 ! 3 atmosphere-ice stress components on grid 2
	71	INTEGER, PARAMETER :: jpr_ity2 = 11 !
	72	INTEGER, PARAMETER :: jpr_itz2 = 12 !
	73	INTEGER, PARAMETER :: jpr_qsroce = 13 ! Qsr above the ocean
	74	INTEGER, PARAMETER :: jpr_qsrice = 14 ! Qsr above the ice
[1226]	75	INTEGER, PARAMETER :: jpr_qsrmix = 15
[6140]	76	INTEGER, PARAMETER :: jpr_qnsoce = 16 ! Qns above the ocean
	77	INTEGER, PARAMETER :: jpr_qnsice = 17 ! Qns above the ice
[1226]	78	INTEGER, PARAMETER :: jpr_qnsmix = 18
[6140]	79	INTEGER, PARAMETER :: jpr_rain = 19 ! total liquid precipitation (rain)
	80	INTEGER, PARAMETER :: jpr_snow = 20 ! solid precipitation over the ocean (snow)
	81	INTEGER, PARAMETER :: jpr_tevp = 21 ! total evaporation
	82	INTEGER, PARAMETER :: jpr_ievp = 22 ! solid evaporation (sublimation)
	83	INTEGER, PARAMETER :: jpr_sbpr = 23 ! sublimation - liquid precipitation - solid precipitation
	84	INTEGER, PARAMETER :: jpr_semp = 24 ! solid freshwater budget (sublimation - snow)
	85	INTEGER, PARAMETER :: jpr_oemp = 25 ! ocean freshwater budget (evap - precip)
	86	INTEGER, PARAMETER :: jpr_w10m = 26 ! 10m wind
	87	INTEGER, PARAMETER :: jpr_dqnsdt = 27 ! d(Q non solar)/d(temperature)
	88	INTEGER, PARAMETER :: jpr_rnf = 28 ! runoffs
	89	INTEGER, PARAMETER :: jpr_cal = 29 ! calving
	90	INTEGER, PARAMETER :: jpr_taum = 30 ! wind stress module
[1696]	91	INTEGER, PARAMETER :: jpr_co2 = 31
[6140]	92	INTEGER, PARAMETER :: jpr_topm = 32 ! topmeltn
	93	INTEGER, PARAMETER :: jpr_botm = 33 ! botmeltn
	94	INTEGER, PARAMETER :: jpr_sflx = 34 ! salt flux
	95	INTEGER, PARAMETER :: jpr_toce = 35 ! ocean temperature
	96	INTEGER, PARAMETER :: jpr_soce = 36 ! ocean salinity
	97	INTEGER, PARAMETER :: jpr_ocx1 = 37 ! ocean current on grid 1
	98	INTEGER, PARAMETER :: jpr_ocy1 = 38 !
	99	INTEGER, PARAMETER :: jpr_ssh = 39 ! sea surface height
	100	INTEGER, PARAMETER :: jpr_fice = 40 ! ice fraction
	101	INTEGER, PARAMETER :: jpr_e3t1st = 41 ! first T level thickness
	102	INTEGER, PARAMETER :: jpr_fraqsr = 42 ! fraction of solar net radiation absorbed in the first ocean level
[7646]	103	INTEGER, PARAMETER :: jpr_mslp = 43 ! mean sea level pressure
	104	INTEGER, PARAMETER :: jpr_hsig = 44 ! Hsig
	105	INTEGER, PARAMETER :: jpr_phioc = 45 ! Wave=>ocean energy flux
	106	INTEGER, PARAMETER :: jpr_sdrftx = 46 ! Stokes drift on grid 1
	107	INTEGER, PARAMETER :: jpr_sdrfty = 47 ! Stokes drift on grid 2
	108	INTEGER, PARAMETER :: jpr_wper = 48 ! Mean wave period
	109	INTEGER, PARAMETER :: jpr_wnum = 49 ! Mean wavenumber
[9034]	110	INTEGER, PARAMETER :: jpr_tauwoc = 50 ! Stress fraction adsorbed by waves
[7646]	111	INTEGER, PARAMETER :: jpr_wdrag = 51 ! Neutral surface drag coefficient
[7788]	112	INTEGER, PARAMETER :: jpr_isf = 52
	113	INTEGER, PARAMETER :: jpr_icb = 53
[9023]	114	INTEGER, PARAMETER :: jpr_wfreq = 54 ! Wave peak frequency
	115	INTEGER, PARAMETER :: jpr_tauwx = 55 ! x component of the ocean stress from waves
	116	INTEGER, PARAMETER :: jpr_tauwy = 56 ! y component of the ocean stress from waves
	117	INTEGER, PARAMETER :: jpr_ts_ice = 57 ! Sea ice surface temp
[3294]	118
[9023]	119	INTEGER, PARAMETER :: jprcv = 57 ! total number of fields received
[7788]	120
[6140]	121	INTEGER, PARAMETER :: jps_fice = 1 ! ice fraction sent to the atmosphere
	122	INTEGER, PARAMETER :: jps_toce = 2 ! ocean temperature
	123	INTEGER, PARAMETER :: jps_tice = 3 ! ice temperature
	124	INTEGER, PARAMETER :: jps_tmix = 4 ! mixed temperature (ocean+ice)
	125	INTEGER, PARAMETER :: jps_albice = 5 ! ice albedo
	126	INTEGER, PARAMETER :: jps_albmix = 6 ! mixed albedo
	127	INTEGER, PARAMETER :: jps_hice = 7 ! ice thickness
	128	INTEGER, PARAMETER :: jps_hsnw = 8 ! snow thickness
	129	INTEGER, PARAMETER :: jps_ocx1 = 9 ! ocean current on grid 1
	130	INTEGER, PARAMETER :: jps_ocy1 = 10 !
	131	INTEGER, PARAMETER :: jps_ocz1 = 11 !
	132	INTEGER, PARAMETER :: jps_ivx1 = 12 ! ice current on grid 1
	133	INTEGER, PARAMETER :: jps_ivy1 = 13 !
	134	INTEGER, PARAMETER :: jps_ivz1 = 14 !
[1534]	135	INTEGER, PARAMETER :: jps_co2 = 15
[6140]	136	INTEGER, PARAMETER :: jps_soce = 16 ! ocean salinity
	137	INTEGER, PARAMETER :: jps_ssh = 17 ! sea surface height
	138	INTEGER, PARAMETER :: jps_qsroce = 18 ! Qsr above the ocean
	139	INTEGER, PARAMETER :: jps_qnsoce = 19 ! Qns above the ocean
	140	INTEGER, PARAMETER :: jps_oemp = 20 ! ocean freshwater budget (evap - precip)
	141	INTEGER, PARAMETER :: jps_sflx = 21 ! salt flux
	142	INTEGER, PARAMETER :: jps_otx1 = 22 ! 2 atmosphere-ocean stress components on grid 1
	143	INTEGER, PARAMETER :: jps_oty1 = 23 !
	144	INTEGER, PARAMETER :: jps_rnf = 24 ! runoffs
	145	INTEGER, PARAMETER :: jps_taum = 25 ! wind stress module
	146	INTEGER, PARAMETER :: jps_fice2 = 26 ! ice fraction sent to OPA (by SAS when doing SAS-OPA coupling)
	147	INTEGER, PARAMETER :: jps_e3t1st = 27 ! first level depth (vvl)
	148	INTEGER, PARAMETER :: jps_fraqsr = 28 ! fraction of solar net radiation absorbed in the first ocean level
[7646]	149	INTEGER, PARAMETER :: jps_ficet = 29 ! total ice fraction
	150	INTEGER, PARAMETER :: jps_ocxw = 30 ! currents on grid 1
	151	INTEGER, PARAMETER :: jps_ocyw = 31 ! currents on grid 2
	152	INTEGER, PARAMETER :: jps_wlev = 32 ! water level
[9019]	153	INTEGER, PARAMETER :: jps_fice1 = 33 ! first-order ice concentration (for semi-implicit coupling of atmos-ice fluxes)
	154	INTEGER, PARAMETER :: jps_a_p = 34 ! meltpond area
	155	INTEGER, PARAMETER :: jps_ht_p = 35 ! meltpond thickness
	156	INTEGER, PARAMETER :: jps_kice = 36 ! sea ice effective conductivity
	157	INTEGER, PARAMETER :: jps_sstfrz = 37 ! sea surface freezing temperature
	158	INTEGER, PARAMETER :: jps_ttilyr = 38 ! sea ice top layer temp
[3294]	159
[9019]	160	INTEGER, PARAMETER :: jpsnd = 38 ! total number of fields sent
	161
[6140]	162	! !! namelist namsbc_cpl
	163	TYPE :: FLD_C !
	164	CHARACTER(len = 32) :: cldes ! desciption of the coupling strategy
	165	CHARACTER(len = 32) :: clcat ! multiple ice categories strategy
	166	CHARACTER(len = 32) :: clvref ! reference of vector ('spherical' or 'cartesian')
	167	CHARACTER(len = 32) :: clvor ! orientation of vector fields ('eastward-northward' or 'local grid')
	168	CHARACTER(len = 32) :: clvgrd ! grids on which is located the vector fields
[3294]	169	END TYPE FLD_C
[6140]	170	! ! Send to the atmosphere
[9019]	171	TYPE(FLD_C) :: sn_snd_temp , sn_snd_alb , sn_snd_thick, sn_snd_crt , sn_snd_co2, &
	172	& sn_snd_thick1, sn_snd_cond, sn_snd_mpnd , sn_snd_sstfrz, sn_snd_ttilyr
[6140]	173	! ! Received from the atmosphere
[9023]	174	TYPE(FLD_C) :: sn_rcv_w10m, sn_rcv_taumod, sn_rcv_tau, sn_rcv_tauw, sn_rcv_dqnsdt, sn_rcv_qsr, &
[9019]	175	& sn_rcv_qns , sn_rcv_emp , sn_rcv_rnf, sn_rcv_ts_ice
	176	TYPE(FLD_C) :: sn_rcv_cal, sn_rcv_iceflx, sn_rcv_co2, sn_rcv_mslp, sn_rcv_icb, sn_rcv_isf
[7646]	177	! Send to waves
	178	TYPE(FLD_C) :: sn_snd_ifrac, sn_snd_crtw, sn_snd_wlev
	179	! Received from waves
[9033]	180	TYPE(FLD_C) :: sn_rcv_hsig, sn_rcv_phioc, sn_rcv_sdrfx, sn_rcv_sdrfy, sn_rcv_wper, sn_rcv_wnum, sn_rcv_tauwoc, &
[9023]	181	sn_rcv_wdrag, sn_rcv_wfreq
[6140]	182	! ! Other namelist parameters
	183	INTEGER :: nn_cplmodel ! Maximum number of models to/from which NEMO is potentialy sending/receiving data
	184	LOGICAL :: ln_usecplmask ! use a coupling mask file to merge data received from several models
[9019]	185	! -> file cplmask.nc with the float variable called cplmask (jpi,jpj,nn_cplmodel)
[3294]	186	TYPE :: DYNARR
[9019]	187	REAL(wp), POINTER, DIMENSION(:,:,:) :: z3
[3294]	188	END TYPE DYNARR
[888]	189
[9019]	190	TYPE( DYNARR ), SAVE, DIMENSION(jprcv) :: frcv ! all fields recieved from the atmosphere
[3294]	191
[9019]	192	REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) :: alb_oce_mix ! ocean albedo sent to atmosphere (mix clear/overcast sky)
[888]	193
[7646]	194	REAL(wp) :: rpref = 101000._wp ! reference atmospheric pressure[N/m2]
	195	REAL(wp) :: r1_grau ! = 1.e0 / (grav * rau0)
[888]	196
[9019]	197	INTEGER , ALLOCATABLE, SAVE, DIMENSION(:) :: nrcvinfo ! OASIS info argument
[7646]	198
[1218]	199	!! Substitution
	200	# include "vectopt_loop_substitute.h90"
	201	!!----------------------------------------------------------------------
[9598]	202	!! NEMO/OCE 4.0 , NEMO Consortium (2018)
[1226]	203	!! $Id$
[10068]	204	!! Software governed by the CeCILL license (see ./LICENSE)
[1218]	205	!!----------------------------------------------------------------------
	206	CONTAINS
	207
[2715]	208	INTEGER FUNCTION sbc_cpl_alloc()
	209	!!----------------------------------------------------------------------
	210	!! * FUNCTION sbc_cpl_alloc *
	211	!!----------------------------------------------------------------------
[7646]	212	INTEGER :: ierr(4)
[2715]	213	!!----------------------------------------------------------------------
	214	ierr(:) = 0
	215	!
[9019]	216	ALLOCATE( alb_oce_mix(jpi,jpj), nrcvinfo(jprcv), STAT=ierr(1) )
[4990]	217
[9570]	218	#if ! defined key_si3 && ! defined key_cice
[4990]	219	ALLOCATE( a_i(jpi,jpj,1) , STAT=ierr(2) ) ! used in sbcice_if.F90 (done here as there is no sbc_ice_if_init)
	220	#endif
[5407]	221	ALLOCATE( xcplmask(jpi,jpj,0:nn_cplmodel) , STAT=ierr(3) )
[2715]	222	!
[7646]	223	IF( .NOT. ln_apr_dyn ) ALLOCATE( ssh_ib(jpi,jpj), ssh_ibb(jpi,jpj), apr(jpi, jpj), STAT=ierr(4) )
	224
[2715]	225	sbc_cpl_alloc = MAXVAL( ierr )
[10425]	226	CALL mpp_sum ( 'sbccpl', sbc_cpl_alloc )
[2715]	227	IF( sbc_cpl_alloc > 0 ) CALL ctl_warn('sbc_cpl_alloc: allocation of arrays failed')
	228	!
	229	END FUNCTION sbc_cpl_alloc
	230
	231
[1218]	232	SUBROUTINE sbc_cpl_init( k_ice )
	233	!!----------------------------------------------------------------------
	234	!! * ROUTINE sbc_cpl_init *
	235	!!
[4990]	236	!! ** Purpose : Initialisation of send and received information from
[1218]	237	!! the atmospheric component
	238	!!
	239	!! ** Method : * Read namsbc_cpl namelist
	240	!! * define the receive interface
	241	!! * define the send interface
	242	!! * initialise the OASIS coupler
	243	!!----------------------------------------------------------------------
[6140]	244	INTEGER, INTENT(in) :: k_ice ! ice management in the sbc (=0/1/2/3)
	245	!
	246	INTEGER :: jn ! dummy loop index
	247	INTEGER :: ios, inum ! Local integer
[9019]	248	REAL(wp), DIMENSION(jpi,jpj) :: zacs, zaos
[1218]	249	!!
[9019]	250	NAMELIST/namsbc_cpl/ sn_snd_temp , sn_snd_alb , sn_snd_thick, sn_snd_crt , sn_snd_co2 , &
[10617]	251	& sn_snd_ttilyr, sn_snd_cond , sn_snd_mpnd , sn_snd_sstfrz, sn_snd_thick1, &
	252	& sn_snd_ifrac , sn_snd_crtw , sn_snd_wlev , sn_rcv_hsig , sn_rcv_phioc, &
[9019]	253	& sn_rcv_w10m , sn_rcv_taumod, sn_rcv_tau , sn_rcv_dqnsdt, sn_rcv_qsr , &
[10617]	254	& sn_rcv_sdrfx , sn_rcv_sdrfy , sn_rcv_wper , sn_rcv_wnum , sn_rcv_tauwoc, &
[9019]	255	& sn_rcv_wdrag , sn_rcv_qns , sn_rcv_emp , sn_rcv_rnf , sn_rcv_cal , &
	256	& sn_rcv_iceflx, sn_rcv_co2 , nn_cplmodel , ln_usecplmask, sn_rcv_mslp , &
[10617]	257	& sn_rcv_icb , sn_rcv_isf , sn_rcv_wfreq , sn_rcv_tauw, nn_cats_cpl , &
	258	& sn_rcv_ts_ice
[7788]	259
[1218]	260	!!---------------------------------------------------------------------
[3294]	261	!
[1218]	262	! ================================ !
	263	! Namelist informations !
	264	! ================================ !
[6140]	265	!
[4147]	266	READ ( numnam_ref, namsbc_cpl, IOSTAT = ios, ERR = 901)
[11536]	267	901 IF( ios /= 0 ) CALL ctl_nam ( ios , 'namsbc_cpl in reference namelist' )
[6140]	268	!
[4147]	269	READ ( numnam_cfg, namsbc_cpl, IOSTAT = ios, ERR = 902 )
[11536]	270	902 IF( ios > 0 ) CALL ctl_nam ( ios , 'namsbc_cpl in configuration namelist' )
[4624]	271	IF(lwm) WRITE ( numond, namsbc_cpl )
[6140]	272	!
[1218]	273	IF(lwp) THEN ! control print
	274	WRITE(numout,*)
	275	WRITE(numout,*)'sbc_cpl_init : namsbc_cpl namelist '
	276	WRITE(numout,*)'~~~~~~~~~~~~'
[5407]	277	ENDIF
	278	IF( lwp .AND. ln_cpl ) THEN ! control print
[3294]	279	WRITE(numout,*)' received fields (mutiple ice categogies)'
	280	WRITE(numout,*)' 10m wind module = ', TRIM(sn_rcv_w10m%cldes ), ' (', TRIM(sn_rcv_w10m%clcat ), ')'
	281	WRITE(numout,*)' stress module = ', TRIM(sn_rcv_taumod%cldes), ' (', TRIM(sn_rcv_taumod%clcat), ')'
	282	WRITE(numout,*)' surface stress = ', TRIM(sn_rcv_tau%cldes ), ' (', TRIM(sn_rcv_tau%clcat ), ')'
	283	WRITE(numout,*)' - referential = ', sn_rcv_tau%clvref
	284	WRITE(numout,*)' - orientation = ', sn_rcv_tau%clvor
	285	WRITE(numout,*)' - mesh = ', sn_rcv_tau%clvgrd
	286	WRITE(numout,*)' non-solar heat flux sensitivity = ', TRIM(sn_rcv_dqnsdt%cldes), ' (', TRIM(sn_rcv_dqnsdt%clcat), ')'
	287	WRITE(numout,*)' solar heat flux = ', TRIM(sn_rcv_qsr%cldes ), ' (', TRIM(sn_rcv_qsr%clcat ), ')'
	288	WRITE(numout,*)' non-solar heat flux = ', TRIM(sn_rcv_qns%cldes ), ' (', TRIM(sn_rcv_qns%clcat ), ')'
	289	WRITE(numout,*)' freshwater budget = ', TRIM(sn_rcv_emp%cldes ), ' (', TRIM(sn_rcv_emp%clcat ), ')'
	290	WRITE(numout,*)' runoffs = ', TRIM(sn_rcv_rnf%cldes ), ' (', TRIM(sn_rcv_rnf%clcat ), ')'
	291	WRITE(numout,*)' calving = ', TRIM(sn_rcv_cal%cldes ), ' (', TRIM(sn_rcv_cal%clcat ), ')'
[7788]	292	WRITE(numout,*)' iceberg = ', TRIM(sn_rcv_icb%cldes ), ' (', TRIM(sn_rcv_icb%clcat ), ')'
	293	WRITE(numout,*)' ice shelf = ', TRIM(sn_rcv_isf%cldes ), ' (', TRIM(sn_rcv_isf%clcat ), ')'
[3294]	294	WRITE(numout,*)' sea ice heat fluxes = ', TRIM(sn_rcv_iceflx%cldes), ' (', TRIM(sn_rcv_iceflx%clcat), ')'
	295	WRITE(numout,*)' atm co2 = ', TRIM(sn_rcv_co2%cldes ), ' (', TRIM(sn_rcv_co2%clcat ), ')'
[7646]	296	WRITE(numout,*)' significant wave heigth = ', TRIM(sn_rcv_hsig%cldes ), ' (', TRIM(sn_rcv_hsig%clcat ), ')'
	297	WRITE(numout,*)' wave to oce energy flux = ', TRIM(sn_rcv_phioc%cldes ), ' (', TRIM(sn_rcv_phioc%clcat ), ')'
	298	WRITE(numout,*)' Surface Stokes drift grid u = ', TRIM(sn_rcv_sdrfx%cldes ), ' (', TRIM(sn_rcv_sdrfx%clcat ), ')'
	299	WRITE(numout,*)' Surface Stokes drift grid v = ', TRIM(sn_rcv_sdrfy%cldes ), ' (', TRIM(sn_rcv_sdrfy%clcat ), ')'
	300	WRITE(numout,*)' Mean wave period = ', TRIM(sn_rcv_wper%cldes ), ' (', TRIM(sn_rcv_wper%clcat ), ')'
	301	WRITE(numout,*)' Mean wave number = ', TRIM(sn_rcv_wnum%cldes ), ' (', TRIM(sn_rcv_wnum%clcat ), ')'
[9023]	302	WRITE(numout,*)' Wave peak frequency = ', TRIM(sn_rcv_wfreq%cldes ), ' (', TRIM(sn_rcv_wfreq%clcat ), ')'
[9034]	303	WRITE(numout,*)' Stress frac adsorbed by waves = ', TRIM(sn_rcv_tauwoc%cldes), ' (', TRIM(sn_rcv_tauwoc%clcat ), ')'
[9023]	304	WRITE(numout,*)' Stress components by waves = ', TRIM(sn_rcv_tauw%cldes ), ' (', TRIM(sn_rcv_tauw%clcat ), ')'
[7646]	305	WRITE(numout,*)' Neutral surf drag coefficient = ', TRIM(sn_rcv_wdrag%cldes ), ' (', TRIM(sn_rcv_wdrag%clcat ), ')'
[9019]	306	WRITE(numout,*)' Sea ice surface skin temperature= ', TRIM(sn_rcv_ts_ice%cldes), ' (', TRIM(sn_rcv_ts_ice%clcat), ')'
[3294]	307	WRITE(numout,*)' sent fields (multiple ice categories)'
	308	WRITE(numout,*)' surface temperature = ', TRIM(sn_snd_temp%cldes ), ' (', TRIM(sn_snd_temp%clcat ), ')'
[9019]	309	WRITE(numout,*)' top ice layer temperature = ', TRIM(sn_snd_ttilyr%cldes), ' (', TRIM(sn_snd_ttilyr%clcat), ')'
[3294]	310	WRITE(numout,*)' albedo = ', TRIM(sn_snd_alb%cldes ), ' (', TRIM(sn_snd_alb%clcat ), ')'
	311	WRITE(numout,*)' ice/snow thickness = ', TRIM(sn_snd_thick%cldes ), ' (', TRIM(sn_snd_thick%clcat ), ')'
[7646]	312	WRITE(numout,*)' total ice fraction = ', TRIM(sn_snd_ifrac%cldes ), ' (', TRIM(sn_snd_ifrac%clcat ), ')'
[3294]	313	WRITE(numout,*)' surface current = ', TRIM(sn_snd_crt%cldes ), ' (', TRIM(sn_snd_crt%clcat ), ')'
	314	WRITE(numout,*)' - referential = ', sn_snd_crt%clvref
	315	WRITE(numout,*)' - orientation = ', sn_snd_crt%clvor
	316	WRITE(numout,*)' - mesh = ', sn_snd_crt%clvgrd
	317	WRITE(numout,*)' oce co2 flux = ', TRIM(sn_snd_co2%cldes ), ' (', TRIM(sn_snd_co2%clcat ), ')'
[9019]	318	WRITE(numout,*)' ice effective conductivity = ', TRIM(sn_snd_cond%cldes ), ' (', TRIM(sn_snd_cond%clcat ), ')'
	319	WRITE(numout,*)' meltponds fraction and depth = ', TRIM(sn_snd_mpnd%cldes ), ' (', TRIM(sn_snd_mpnd%clcat ), ')'
	320	WRITE(numout,*)' sea surface freezing temp = ', TRIM(sn_snd_sstfrz%cldes), ' (', TRIM(sn_snd_sstfrz%clcat), ')'
[7646]	321	WRITE(numout,*)' water level = ', TRIM(sn_snd_wlev%cldes ), ' (', TRIM(sn_snd_wlev%clcat ), ')'
	322	WRITE(numout,*)' mean sea level pressure = ', TRIM(sn_rcv_mslp%cldes ), ' (', TRIM(sn_rcv_mslp%clcat ), ')'
	323	WRITE(numout,*)' surface current to waves = ', TRIM(sn_snd_crtw%cldes ), ' (', TRIM(sn_snd_crtw%clcat ), ')'
	324	WRITE(numout,*)' - referential = ', sn_snd_crtw%clvref
	325	WRITE(numout,*)' - orientation = ', sn_snd_crtw%clvor
	326	WRITE(numout,*)' - mesh = ', sn_snd_crtw%clvgrd
[4990]	327	WRITE(numout,*)' nn_cplmodel = ', nn_cplmodel
	328	WRITE(numout,*)' ln_usecplmask = ', ln_usecplmask
[9019]	329	WRITE(numout,*)' nn_cats_cpl = ', nn_cats_cpl
[1218]	330	ENDIF
[888]	331
[3294]	332	! ! allocate sbccpl arrays
[2715]	333	IF( sbc_cpl_alloc() /= 0 ) CALL ctl_stop( 'STOP', 'sbc_cpl_alloc : unable to allocate arrays' )
[1218]	334
	335	! ================================ !
	336	! Define the receive interface !
	337	! ================================ !
[1698]	338	nrcvinfo(:) = OASIS_idle ! needed by nrcvinfo(jpr_otx1) if we do not receive ocean stress
[888]	339
[1218]	340	! for each field: define the OASIS name (srcv(:)%clname)
	341	! define receive or not from the namelist parameters (srcv(:)%laction)
	342	! define the north fold type of lbc (srcv(:)%nsgn)
[888]	343
[1218]	344	! default definitions of srcv
[3294]	345	srcv(:)%laction = .FALSE. ; srcv(:)%clgrid = 'T' ; srcv(:)%nsgn = 1. ; srcv(:)%nct = 1
[888]	346
[1218]	347	! ! ------------------------- !
	348	! ! ice and ocean wind stress !
	349	! ! ------------------------- !
	350	! ! Name
	351	srcv(jpr_otx1)%clname = 'O_OTaux1' ! 1st ocean component on grid ONE (T or U)
	352	srcv(jpr_oty1)%clname = 'O_OTauy1' ! 2nd - - - -
	353	srcv(jpr_otz1)%clname = 'O_OTauz1' ! 3rd - - - -
	354	srcv(jpr_otx2)%clname = 'O_OTaux2' ! 1st ocean component on grid TWO (V)
	355	srcv(jpr_oty2)%clname = 'O_OTauy2' ! 2nd - - - -
	356	srcv(jpr_otz2)%clname = 'O_OTauz2' ! 3rd - - - -
	357	!
	358	srcv(jpr_itx1)%clname = 'O_ITaux1' ! 1st ice component on grid ONE (T, F, I or U)
	359	srcv(jpr_ity1)%clname = 'O_ITauy1' ! 2nd - - - -
	360	srcv(jpr_itz1)%clname = 'O_ITauz1' ! 3rd - - - -
	361	srcv(jpr_itx2)%clname = 'O_ITaux2' ! 1st ice component on grid TWO (V)
	362	srcv(jpr_ity2)%clname = 'O_ITauy2' ! 2nd - - - -
	363	srcv(jpr_itz2)%clname = 'O_ITauz2' ! 3rd - - - -
	364	!
[1833]	365	! Vectors: change of sign at north fold ONLY if on the local grid
[7646]	366	IF( TRIM( sn_rcv_tau%cldes ) == 'oce only' .OR. TRIM(sn_rcv_tau%cldes ) == 'oce and ice') THEN ! avoid working with the atmospheric fields if they are not coupled
[3294]	367	IF( TRIM( sn_rcv_tau%clvor ) == 'local grid' ) srcv(jpr_otx1:jpr_itz2)%nsgn = -1.
[1218]	368
	369	! ! Set grid and action
[3294]	370	SELECT CASE( TRIM( sn_rcv_tau%clvgrd ) ) ! 'T', 'U,V', 'U,V,I', 'U,V,F', 'T,I', 'T,F', or 'T,U,V'
[1218]	371	CASE( 'T' )
	372	srcv(jpr_otx1:jpr_itz2)%clgrid = 'T' ! oce and ice components given at T-point
	373	srcv(jpr_otx1:jpr_otz1)%laction = .TRUE. ! receive oce components on grid 1
	374	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1
	375	CASE( 'U,V' )
	376	srcv(jpr_otx1:jpr_otz1)%clgrid = 'U' ! oce components given at U-point
	377	srcv(jpr_otx2:jpr_otz2)%clgrid = 'V' ! and V-point
	378	srcv(jpr_itx1:jpr_itz1)%clgrid = 'U' ! ice components given at U-point
	379	srcv(jpr_itx2:jpr_itz2)%clgrid = 'V' ! and V-point
	380	srcv(jpr_otx1:jpr_itz2)%laction = .TRUE. ! receive oce and ice components on both grid 1 & 2
	381	CASE( 'U,V,T' )
	382	srcv(jpr_otx1:jpr_otz1)%clgrid = 'U' ! oce components given at U-point
	383	srcv(jpr_otx2:jpr_otz2)%clgrid = 'V' ! and V-point
	384	srcv(jpr_itx1:jpr_itz1)%clgrid = 'T' ! ice components given at T-point
	385	srcv(jpr_otx1:jpr_otz2)%laction = .TRUE. ! receive oce components on grid 1 & 2
	386	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1 only
	387	CASE( 'U,V,I' )
	388	srcv(jpr_otx1:jpr_otz1)%clgrid = 'U' ! oce components given at U-point
	389	srcv(jpr_otx2:jpr_otz2)%clgrid = 'V' ! and V-point
	390	srcv(jpr_itx1:jpr_itz1)%clgrid = 'I' ! ice components given at I-point
	391	srcv(jpr_otx1:jpr_otz2)%laction = .TRUE. ! receive oce components on grid 1 & 2
	392	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1 only
	393	CASE( 'U,V,F' )
	394	srcv(jpr_otx1:jpr_otz1)%clgrid = 'U' ! oce components given at U-point
	395	srcv(jpr_otx2:jpr_otz2)%clgrid = 'V' ! and V-point
	396	srcv(jpr_itx1:jpr_itz1)%clgrid = 'F' ! ice components given at F-point
	397	srcv(jpr_otx1:jpr_otz2)%laction = .TRUE. ! receive oce components on grid 1 & 2
	398	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1 only
	399	CASE( 'T,I' )
	400	srcv(jpr_otx1:jpr_itz2)%clgrid = 'T' ! oce and ice components given at T-point
	401	srcv(jpr_itx1:jpr_itz1)%clgrid = 'I' ! ice components given at I-point
	402	srcv(jpr_otx1:jpr_otz1)%laction = .TRUE. ! receive oce components on grid 1
	403	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1
	404	CASE( 'T,F' )
	405	srcv(jpr_otx1:jpr_itz2)%clgrid = 'T' ! oce and ice components given at T-point
	406	srcv(jpr_itx1:jpr_itz1)%clgrid = 'F' ! ice components given at F-point
	407	srcv(jpr_otx1:jpr_otz1)%laction = .TRUE. ! receive oce components on grid 1
	408	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1
	409	CASE( 'T,U,V' )
	410	srcv(jpr_otx1:jpr_otz1)%clgrid = 'T' ! oce components given at T-point
	411	srcv(jpr_itx1:jpr_itz1)%clgrid = 'U' ! ice components given at U-point
	412	srcv(jpr_itx2:jpr_itz2)%clgrid = 'V' ! and V-point
	413	srcv(jpr_otx1:jpr_otz1)%laction = .TRUE. ! receive oce components on grid 1 only
	414	srcv(jpr_itx1:jpr_itz2)%laction = .TRUE. ! receive ice components on grid 1 & 2
	415	CASE default
[3294]	416	CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_tau%clvgrd' )
[1218]	417	END SELECT
	418	!
[3294]	419	IF( TRIM( sn_rcv_tau%clvref ) == 'spherical' ) & ! spherical: 3rd component not received
[1218]	420	& srcv( (/jpr_otz1, jpr_otz2, jpr_itz1, jpr_itz2/) )%laction = .FALSE.
	421	!
[3680]	422	IF( TRIM( sn_rcv_tau%clvor ) == 'local grid' ) THEN ! already on local grid -> no need of the second grid
	423	srcv(jpr_otx2:jpr_otz2)%laction = .FALSE.
	424	srcv(jpr_itx2:jpr_itz2)%laction = .FALSE.
	425	srcv(jpr_oty1)%clgrid = srcv(jpr_oty2)%clgrid ! not needed but cleaner...
	426	srcv(jpr_ity1)%clgrid = srcv(jpr_ity2)%clgrid ! not needed but cleaner...
	427	ENDIF
	428	!
[3294]	429	IF( TRIM( sn_rcv_tau%cldes ) /= 'oce and ice' ) THEN ! 'oce and ice' case ocean stress on ocean mesh used
[4162]	430	srcv(jpr_itx1:jpr_itz2)%laction = .FALSE. ! ice components not received
[1218]	431	srcv(jpr_itx1)%clgrid = 'U' ! ocean stress used after its transformation
	432	srcv(jpr_ity1)%clgrid = 'V' ! i.e. it is always at U- & V-points for i- & j-comp. resp.
	433	ENDIF
[7646]	434	ENDIF
	435
[1218]	436	! ! ------------------------- !
	437	! ! freshwater budget ! E-P
	438	! ! ------------------------- !
	439	! we suppose that atmosphere modele do not make the difference between precipiration (liquide or solid)
	440	! over ice of free ocean within the same atmospheric cell.cd
	441	srcv(jpr_rain)%clname = 'OTotRain' ! Rain = liquid precipitation
	442	srcv(jpr_snow)%clname = 'OTotSnow' ! Snow = solid precipitation
	443	srcv(jpr_tevp)%clname = 'OTotEvap' ! total evaporation (over oce + ice sublimation)
	444	srcv(jpr_ievp)%clname = 'OIceEvap' ! evaporation over ice = sublimation
[1232]	445	srcv(jpr_sbpr)%clname = 'OSubMPre' ! sublimation - liquid precipitation - solid precipitation
	446	srcv(jpr_semp)%clname = 'OISubMSn' ! ice solid water budget = sublimation - solid precipitation
	447	srcv(jpr_oemp)%clname = 'OOEvaMPr' ! ocean water budget = ocean Evap - ocean precip
[3294]	448	SELECT CASE( TRIM( sn_rcv_emp%cldes ) )
[5407]	449	CASE( 'none' ) ! nothing to do
[9019]	450	CASE( 'oce only' ) ; srcv(jpr_oemp)%laction = .TRUE.
[4162]	451	CASE( 'conservative' )
	452	srcv( (/jpr_rain, jpr_snow, jpr_ievp, jpr_tevp/) )%laction = .TRUE.
[12182]	453	IF( k_ice <= 1 ) srcv(jpr_ievp)%laction = .FALSE.
[1232]	454	CASE( 'oce and ice' ) ; srcv( (/jpr_ievp, jpr_sbpr, jpr_semp, jpr_oemp/) )%laction = .TRUE.
[3294]	455	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_emp%cldes' )
[1218]	456	END SELECT
[6140]	457	!
[1218]	458	! ! ------------------------- !
	459	! ! Runoffs & Calving !
	460	! ! ------------------------- !
[5407]	461	srcv(jpr_rnf )%clname = 'O_Runoff'
	462	IF( TRIM( sn_rcv_rnf%cldes ) == 'coupled' ) THEN
	463	srcv(jpr_rnf)%laction = .TRUE.
	464	l_rnfcpl = .TRUE. ! -> no need to read runoffs in sbcrnf
	465	ln_rnf = nn_components /= jp_iam_sas ! -> force to go through sbcrnf if not sas
	466	IF(lwp) WRITE(numout,*)
	467	IF(lwp) WRITE(numout,*) ' runoffs received from oasis -> force ln_rnf = ', ln_rnf
	468	ENDIF
	469	!
[7788]	470	srcv(jpr_cal)%clname = 'OCalving' ; IF( TRIM( sn_rcv_cal%cldes) == 'coupled' ) srcv(jpr_cal)%laction = .TRUE.
	471	srcv(jpr_isf)%clname = 'OIcshelf' ; IF( TRIM( sn_rcv_isf%cldes) == 'coupled' ) srcv(jpr_isf)%laction = .TRUE.
	472	srcv(jpr_icb)%clname = 'OIceberg' ; IF( TRIM( sn_rcv_icb%cldes) == 'coupled' ) srcv(jpr_icb)%laction = .TRUE.
	473
[12150]	474	IF( srcv(jpr_isf)%laction ) THEN
	475	l_isfoasis = .TRUE. ! -> isf fwf comes from oasis
[7788]	476	IF(lwp) WRITE(numout,*)
	477	IF(lwp) WRITE(numout,*) ' iceshelf received from oasis '
[12150]	478	CALL ctl_stop('STOP','not coded')
[7788]	479	ENDIF
[6140]	480	!
[1218]	481	! ! ------------------------- !
	482	! ! non solar radiation ! Qns
	483	! ! ------------------------- !
	484	srcv(jpr_qnsoce)%clname = 'O_QnsOce'
	485	srcv(jpr_qnsice)%clname = 'O_QnsIce'
	486	srcv(jpr_qnsmix)%clname = 'O_QnsMix'
[3294]	487	SELECT CASE( TRIM( sn_rcv_qns%cldes ) )
[5407]	488	CASE( 'none' ) ! nothing to do
[1218]	489	CASE( 'oce only' ) ; srcv( jpr_qnsoce )%laction = .TRUE.
	490	CASE( 'conservative' ) ; srcv( (/jpr_qnsice, jpr_qnsmix/) )%laction = .TRUE.
	491	CASE( 'oce and ice' ) ; srcv( (/jpr_qnsice, jpr_qnsoce/) )%laction = .TRUE.
	492	CASE( 'mixed oce-ice' ) ; srcv( jpr_qnsmix )%laction = .TRUE.
[3294]	493	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_qns%cldes' )
[1218]	494	END SELECT
[9019]	495	IF( TRIM( sn_rcv_qns%cldes ) == 'mixed oce-ice' .AND. nn_cats_cpl > 1 ) &
[3294]	496	CALL ctl_stop( 'sbc_cpl_init: sn_rcv_qns%cldes not currently allowed to be mixed oce-ice for multi-category ice' )
[9019]	497	!
[1218]	498	! ! ------------------------- !
	499	! ! solar radiation ! Qsr
	500	! ! ------------------------- !
	501	srcv(jpr_qsroce)%clname = 'O_QsrOce'
	502	srcv(jpr_qsrice)%clname = 'O_QsrIce'
	503	srcv(jpr_qsrmix)%clname = 'O_QsrMix'
[3294]	504	SELECT CASE( TRIM( sn_rcv_qsr%cldes ) )
[5407]	505	CASE( 'none' ) ! nothing to do
[1218]	506	CASE( 'oce only' ) ; srcv( jpr_qsroce )%laction = .TRUE.
	507	CASE( 'conservative' ) ; srcv( (/jpr_qsrice, jpr_qsrmix/) )%laction = .TRUE.
	508	CASE( 'oce and ice' ) ; srcv( (/jpr_qsrice, jpr_qsroce/) )%laction = .TRUE.
	509	CASE( 'mixed oce-ice' ) ; srcv( jpr_qsrmix )%laction = .TRUE.
[3294]	510	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_qsr%cldes' )
[1218]	511	END SELECT
[9019]	512	IF( TRIM( sn_rcv_qsr%cldes ) == 'mixed oce-ice' .AND. nn_cats_cpl > 1 ) &
[3294]	513	CALL ctl_stop( 'sbc_cpl_init: sn_rcv_qsr%cldes not currently allowed to be mixed oce-ice for multi-category ice' )
[9019]	514	!
[1218]	515	! ! ------------------------- !
	516	! ! non solar sensitivity ! d(Qns)/d(T)
	517	! ! ------------------------- !
	518	srcv(jpr_dqnsdt)%clname = 'O_dQnsdT'
[3294]	519	IF( TRIM( sn_rcv_dqnsdt%cldes ) == 'coupled' ) srcv(jpr_dqnsdt)%laction = .TRUE.
[1232]	520	!
	521	! non solar sensitivity mandatory for mixed oce-ice solar radiation coupling technique
[9019]	522	IF( TRIM( sn_rcv_dqnsdt%cldes ) == 'none' .AND. TRIM( sn_rcv_qns%cldes ) == 'mixed oce-ice' ) &
	523	& CALL ctl_stop( 'sbc_cpl_init: namsbc_cpl namelist mismatch between sn_rcv_qns%cldes and sn_rcv_dqnsdt%cldes' )
	524	!
[1218]	525	! ! ------------------------- !
	526	! ! 10m wind module !
	527	! ! ------------------------- !
[3294]	528	srcv(jpr_w10m)%clname = 'O_Wind10' ; IF( TRIM(sn_rcv_w10m%cldes ) == 'coupled' ) srcv(jpr_w10m)%laction = .TRUE.
[1696]	529	!
	530	! ! ------------------------- !
	531	! ! wind stress module !
	532	! ! ------------------------- !
[3294]	533	srcv(jpr_taum)%clname = 'O_TauMod' ; IF( TRIM(sn_rcv_taumod%cldes) == 'coupled' ) srcv(jpr_taum)%laction = .TRUE.
[9019]	534	!
[1534]	535	! ! ------------------------- !
	536	! ! Atmospheric CO2 !
	537	! ! ------------------------- !
[7646]	538	srcv(jpr_co2 )%clname = 'O_AtmCO2'
	539	IF( TRIM(sn_rcv_co2%cldes ) == 'coupled' ) THEN
	540	srcv(jpr_co2 )%laction = .TRUE.
	541	l_co2cpl = .TRUE.
	542	IF(lwp) WRITE(numout,*)
	543	IF(lwp) WRITE(numout,*) ' Atmospheric pco2 received from oasis '
	544	IF(lwp) WRITE(numout,*)
	545	ENDIF
[9019]	546	!
[7646]	547	! ! ------------------------- !
	548	! ! Mean Sea Level Pressure !
	549	! ! ------------------------- !
	550	srcv(jpr_mslp)%clname = 'O_MSLP' ; IF( TRIM(sn_rcv_mslp%cldes ) == 'coupled' ) srcv(jpr_mslp)%laction = .TRUE.
[9019]	551	!
[3294]	552	! ! ------------------------- !
[9019]	553	! ! ice topmelt and botmelt !
[3294]	554	! ! ------------------------- !
	555	srcv(jpr_topm )%clname = 'OTopMlt'
	556	srcv(jpr_botm )%clname = 'OBotMlt'
	557	IF( TRIM(sn_rcv_iceflx%cldes) == 'coupled' ) THEN
[12182]	558	IF( TRIM( sn_rcv_iceflx%clcat ) == 'yes' ) THEN
[9019]	559	srcv(jpr_topm:jpr_botm)%nct = nn_cats_cpl
[3294]	560	ELSE
	561	CALL ctl_stop( 'sbc_cpl_init: sn_rcv_iceflx%clcat should always be set to yes currently' )
	562	ENDIF
	563	srcv(jpr_topm:jpr_botm)%laction = .TRUE.
	564	ENDIF
[7646]	565	! ! ------------------------- !
[9019]	566	! ! ice skin temperature !
	567	! ! ------------------------- !
	568	srcv(jpr_ts_ice)%clname = 'OTsfIce' ! needed by Met Office
[12182]	569	IF( TRIM( sn_rcv_ts_ice%cldes ) == 'ice' ) srcv(jpr_ts_ice)%laction = .TRUE.
	570	IF( TRIM( sn_rcv_ts_ice%clcat ) == 'yes' ) srcv(jpr_ts_ice)%nct = nn_cats_cpl
	571	IF( TRIM( sn_rcv_emp%clcat ) == 'yes' ) srcv(jpr_ievp)%nct = nn_cats_cpl
[9019]	572
[12252]	573	#if defined key_si3
	574	IF( ln_cndflx .AND. .NOT.ln_cndemulate ) THEN
	575	IF( .NOT.srcv(jpr_ts_ice)%laction ) &
	576	& CALL ctl_stop( 'sbc_cpl_init: srcv(jpr_ts_ice)%laction should be set to true when ln_cndflx=T' )
	577	ENDIF
	578	#endif
[9019]	579	! ! ------------------------- !
[7646]	580	! ! Wave breaking !
	581	! ! ------------------------- !
	582	srcv(jpr_hsig)%clname = 'O_Hsigwa' ! significant wave height
	583	IF( TRIM(sn_rcv_hsig%cldes ) == 'coupled' ) THEN
	584	srcv(jpr_hsig)%laction = .TRUE.
	585	cpl_hsig = .TRUE.
	586	ENDIF
	587	srcv(jpr_phioc)%clname = 'O_PhiOce' ! wave to ocean energy
	588	IF( TRIM(sn_rcv_phioc%cldes ) == 'coupled' ) THEN
	589	srcv(jpr_phioc)%laction = .TRUE.
	590	cpl_phioc = .TRUE.
	591	ENDIF
	592	srcv(jpr_sdrftx)%clname = 'O_Sdrfx' ! Stokes drift in the u direction
	593	IF( TRIM(sn_rcv_sdrfx%cldes ) == 'coupled' ) THEN
	594	srcv(jpr_sdrftx)%laction = .TRUE.
	595	cpl_sdrftx = .TRUE.
	596	ENDIF
	597	srcv(jpr_sdrfty)%clname = 'O_Sdrfy' ! Stokes drift in the v direction
	598	IF( TRIM(sn_rcv_sdrfy%cldes ) == 'coupled' ) THEN
	599	srcv(jpr_sdrfty)%laction = .TRUE.
	600	cpl_sdrfty = .TRUE.
	601	ENDIF
	602	srcv(jpr_wper)%clname = 'O_WPer' ! mean wave period
	603	IF( TRIM(sn_rcv_wper%cldes ) == 'coupled' ) THEN
	604	srcv(jpr_wper)%laction = .TRUE.
	605	cpl_wper = .TRUE.
	606	ENDIF
[9023]	607	srcv(jpr_wfreq)%clname = 'O_WFreq' ! wave peak frequency
	608	IF( TRIM(sn_rcv_wfreq%cldes ) == 'coupled' ) THEN
	609	srcv(jpr_wfreq)%laction = .TRUE.
	610	cpl_wfreq = .TRUE.
	611	ENDIF
[7646]	612	srcv(jpr_wnum)%clname = 'O_WNum' ! mean wave number
	613	IF( TRIM(sn_rcv_wnum%cldes ) == 'coupled' ) THEN
	614	srcv(jpr_wnum)%laction = .TRUE.
	615	cpl_wnum = .TRUE.
	616	ENDIF
[9034]	617	srcv(jpr_tauwoc)%clname = 'O_TauOce' ! stress fraction adsorbed by the wave
[9033]	618	IF( TRIM(sn_rcv_tauwoc%cldes ) == 'coupled' ) THEN
	619	srcv(jpr_tauwoc)%laction = .TRUE.
	620	cpl_tauwoc = .TRUE.
[7646]	621	ENDIF
[9023]	622	srcv(jpr_tauwx)%clname = 'O_Tauwx' ! ocean stress from wave in the x direction
	623	srcv(jpr_tauwy)%clname = 'O_Tauwy' ! ocean stress from wave in the y direction
	624	IF( TRIM(sn_rcv_tauw%cldes ) == 'coupled' ) THEN
	625	srcv(jpr_tauwx)%laction = .TRUE.
	626	srcv(jpr_tauwy)%laction = .TRUE.
	627	cpl_tauw = .TRUE.
	628	ENDIF
[7646]	629	srcv(jpr_wdrag)%clname = 'O_WDrag' ! neutral surface drag coefficient
	630	IF( TRIM(sn_rcv_wdrag%cldes ) == 'coupled' ) THEN
	631	srcv(jpr_wdrag)%laction = .TRUE.
	632	cpl_wdrag = .TRUE.
	633	ENDIF
[9033]	634	IF( srcv(jpr_tauwoc)%laction .AND. srcv(jpr_tauwx)%laction .AND. srcv(jpr_tauwy)%laction ) &
[9023]	635	CALL ctl_stop( 'More than one method for modifying the ocean stress has been selected ', &
[9033]	636	'(sn_rcv_tauwoc=coupled and sn_rcv_tauw=coupled)' )
[9023]	637	!
[5407]	638	! ! ------------------------------- !
	639	! ! OPA-SAS coupling - rcv by opa !
	640	! ! ------------------------------- !
	641	srcv(jpr_sflx)%clname = 'O_SFLX'
	642	srcv(jpr_fice)%clname = 'RIceFrc'
	643	!
	644	IF( nn_components == jp_iam_opa ) THEN ! OPA coupled to SAS via OASIS: force received field by OPA (sent by SAS)
	645	srcv(:)%laction = .FALSE. ! force default definition in case of opa <-> sas coupling
	646	srcv(:)%clgrid = 'T' ! force default definition in case of opa <-> sas coupling
	647	srcv(:)%nsgn = 1. ! force default definition in case of opa <-> sas coupling
	648	srcv( (/jpr_qsroce, jpr_qnsoce, jpr_oemp, jpr_sflx, jpr_fice, jpr_otx1, jpr_oty1, jpr_taum/) )%laction = .TRUE.
	649	srcv(jpr_otx1)%clgrid = 'U' ! oce components given at U-point
	650	srcv(jpr_oty1)%clgrid = 'V' ! and V-point
	651	! Vectors: change of sign at north fold ONLY if on the local grid
	652	srcv( (/jpr_otx1,jpr_oty1/) )%nsgn = -1.
	653	sn_rcv_tau%clvgrd = 'U,V'
	654	sn_rcv_tau%clvor = 'local grid'
	655	sn_rcv_tau%clvref = 'spherical'
	656	sn_rcv_emp%cldes = 'oce only'
	657	!
	658	IF(lwp) THEN ! control print
	659	WRITE(numout,*)
	660	WRITE(numout,*)' Special conditions for SAS-OPA coupling '
	661	WRITE(numout,*)' OPA component '
	662	WRITE(numout,*)
	663	WRITE(numout,*)' received fields from SAS component '
	664	WRITE(numout,*)' ice cover '
	665	WRITE(numout,*)' oce only EMP '
	666	WRITE(numout,*)' salt flux '
	667	WRITE(numout,*)' mixed oce-ice solar flux '
	668	WRITE(numout,*)' mixed oce-ice non solar flux '
	669	WRITE(numout,*)' wind stress U,V on local grid and sperical coordinates '
	670	WRITE(numout,*)' wind stress module'
	671	WRITE(numout,*)
	672	ENDIF
	673	ENDIF
	674	! ! -------------------------------- !
	675	! ! OPA-SAS coupling - rcv by sas !
	676	! ! -------------------------------- !
	677	srcv(jpr_toce )%clname = 'I_SSTSST'
	678	srcv(jpr_soce )%clname = 'I_SSSal'
	679	srcv(jpr_ocx1 )%clname = 'I_OCurx1'
	680	srcv(jpr_ocy1 )%clname = 'I_OCury1'
	681	srcv(jpr_ssh )%clname = 'I_SSHght'
	682	srcv(jpr_e3t1st)%clname = 'I_E3T1st'
	683	srcv(jpr_fraqsr)%clname = 'I_FraQsr'
	684	!
	685	IF( nn_components == jp_iam_sas ) THEN
	686	IF( .NOT. ln_cpl ) srcv(:)%laction = .FALSE. ! force default definition in case of opa <-> sas coupling
	687	IF( .NOT. ln_cpl ) srcv(:)%clgrid = 'T' ! force default definition in case of opa <-> sas coupling
	688	IF( .NOT. ln_cpl ) srcv(:)%nsgn = 1. ! force default definition in case of opa <-> sas coupling
	689	srcv( (/jpr_toce, jpr_soce, jpr_ssh, jpr_fraqsr, jpr_ocx1, jpr_ocy1/) )%laction = .TRUE.
[6140]	690	srcv( jpr_e3t1st )%laction = .NOT.ln_linssh
[5407]	691	srcv(jpr_ocx1)%clgrid = 'U' ! oce components given at U-point
	692	srcv(jpr_ocy1)%clgrid = 'V' ! and V-point
	693	! Vectors: change of sign at north fold ONLY if on the local grid
	694	srcv(jpr_ocx1:jpr_ocy1)%nsgn = -1.
	695	! Change first letter to couple with atmosphere if already coupled OPA
	696	! this is nedeed as each variable name used in the namcouple must be unique:
	697	! for example O_Runoff received by OPA from SAS and therefore O_Runoff received by SAS from the Atmosphere
	698	DO jn = 1, jprcv
[12182]	699	IF( srcv(jn)%clname(1:1) == "O" ) srcv(jn)%clname = "S"//srcv(jn)%clname(2:LEN(srcv(jn)%clname))
[5407]	700	END DO
	701	!
	702	IF(lwp) THEN ! control print
	703	WRITE(numout,*)
	704	WRITE(numout,*)' Special conditions for SAS-OPA coupling '
	705	WRITE(numout,*)' SAS component '
	706	WRITE(numout,*)
	707	IF( .NOT. ln_cpl ) THEN
	708	WRITE(numout,*)' received fields from OPA component '
	709	ELSE
	710	WRITE(numout,*)' Additional received fields from OPA component : '
	711	ENDIF
[7646]	712	WRITE(numout,*)' sea surface temperature (Celsius) '
[5407]	713	WRITE(numout,*)' sea surface salinity '
	714	WRITE(numout,*)' surface currents '
	715	WRITE(numout,*)' sea surface height '
	716	WRITE(numout,*)' thickness of first ocean T level '
	717	WRITE(numout,*)' fraction of solar net radiation absorbed in the first ocean level'
	718	WRITE(numout,*)
	719	ENDIF
	720	ENDIF
	721
	722	! =================================================== !
	723	! Allocate all parts of frcv used for received fields !
	724	! =================================================== !
[3294]	725	DO jn = 1, jprcv
[12182]	726	IF( srcv(jn)%laction ) ALLOCATE( frcv(jn)%z3(jpi,jpj,srcv(jn)%nct) )
[3294]	727	END DO
	728	! Allocate taum part of frcv which is used even when not received as coupling field
[12182]	729	IF( .NOT. srcv(jpr_taum)%laction ) ALLOCATE( frcv(jpr_taum)%z3(jpi,jpj,srcv(jpr_taum)%nct) )
[5407]	730	! Allocate w10m part of frcv which is used even when not received as coupling field
[12182]	731	IF( .NOT. srcv(jpr_w10m)%laction ) ALLOCATE( frcv(jpr_w10m)%z3(jpi,jpj,srcv(jpr_w10m)%nct) )
[5407]	732	! Allocate jpr_otx1 part of frcv which is used even when not received as coupling field
[12182]	733	IF( .NOT. srcv(jpr_otx1)%laction ) ALLOCATE( frcv(jpr_otx1)%z3(jpi,jpj,srcv(jpr_otx1)%nct) )
	734	IF( .NOT. srcv(jpr_oty1)%laction ) ALLOCATE( frcv(jpr_oty1)%z3(jpi,jpj,srcv(jpr_oty1)%nct) )
[4162]	735	! Allocate itx1 and ity1 as they are used in sbc_cpl_ice_tau even if srcv(jpr_itx1)%laction = .FALSE.
	736	IF( k_ice /= 0 ) THEN
[12182]	737	IF( .NOT. srcv(jpr_itx1)%laction ) ALLOCATE( frcv(jpr_itx1)%z3(jpi,jpj,srcv(jpr_itx1)%nct) )
	738	IF( .NOT. srcv(jpr_ity1)%laction ) ALLOCATE( frcv(jpr_ity1)%z3(jpi,jpj,srcv(jpr_ity1)%nct) )
	739	ENDIF
[3294]	740
[1218]	741	! ================================ !
	742	! Define the send interface !
	743	! ================================ !
[3294]	744	! for each field: define the OASIS name (ssnd(:)%clname)
	745	! define send or not from the namelist parameters (ssnd(:)%laction)
	746	! define the north fold type of lbc (ssnd(:)%nsgn)
[1218]	747
	748	! default definitions of nsnd
[3294]	749	ssnd(:)%laction = .FALSE. ; ssnd(:)%clgrid = 'T' ; ssnd(:)%nsgn = 1. ; ssnd(:)%nct = 1
[1218]	750
	751	! ! ------------------------- !
	752	! ! Surface temperature !
	753	! ! ------------------------- !
[9019]	754	ssnd(jps_toce)%clname = 'O_SSTSST'
	755	ssnd(jps_tice)%clname = 'O_TepIce'
	756	ssnd(jps_ttilyr)%clname = 'O_TtiLyr'
	757	ssnd(jps_tmix)%clname = 'O_TepMix'
[3294]	758	SELECT CASE( TRIM( sn_snd_temp%cldes ) )
[5410]	759	CASE( 'none' ) ! nothing to do
	760	CASE( 'oce only' ) ; ssnd( jps_toce )%laction = .TRUE.
[9019]	761	CASE( 'oce and ice' , 'weighted oce and ice' , 'oce and weighted ice' )
[3294]	762	ssnd( (/jps_toce, jps_tice/) )%laction = .TRUE.
[12182]	763	IF( TRIM( sn_snd_temp%clcat ) == 'yes' ) ssnd(jps_tice)%nct = nn_cats_cpl
[5410]	764	CASE( 'mixed oce-ice' ) ; ssnd( jps_tmix )%laction = .TRUE.
[3294]	765	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_temp%cldes' )
[1218]	766	END SELECT
[5407]	767
[1218]	768	! ! ------------------------- !
	769	! ! Albedo !
	770	! ! ------------------------- !
	771	ssnd(jps_albice)%clname = 'O_AlbIce'
	772	ssnd(jps_albmix)%clname = 'O_AlbMix'
[3294]	773	SELECT CASE( TRIM( sn_snd_alb%cldes ) )
[5410]	774	CASE( 'none' ) ! nothing to do
	775	CASE( 'ice' , 'weighted ice' ) ; ssnd(jps_albice)%laction = .TRUE.
	776	CASE( 'mixed oce-ice' ) ; ssnd(jps_albmix)%laction = .TRUE.
[3294]	777	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_alb%cldes' )
[1218]	778	END SELECT
[1232]	779	!
	780	! Need to calculate oceanic albedo if
	781	! 1. sending mixed oce-ice albedo or
	782	! 2. receiving mixed oce-ice solar radiation
[12182]	783	IF( TRIM ( sn_snd_alb%cldes ) == 'mixed oce-ice' .OR. TRIM ( sn_rcv_qsr%cldes ) == 'mixed oce-ice' ) THEN
[9019]	784	CALL oce_alb( zaos, zacs )
[1308]	785	! Due to lack of information on nebulosity : mean clear/overcast sky
[9019]	786	alb_oce_mix(:,:) = ( zacs(:,:) + zaos(:,:) ) * 0.5
[1232]	787	ENDIF
[1218]	788	! ! ------------------------- !
	789	! ! Ice fraction & Thickness !
	790	! ! ------------------------- !
[9019]	791	ssnd(jps_fice)%clname = 'OIceFrc'
[7646]	792	ssnd(jps_ficet)%clname = 'OIceFrcT'
[9019]	793	ssnd(jps_hice)%clname = 'OIceTck'
	794	ssnd(jps_a_p)%clname = 'OPndFrc'
	795	ssnd(jps_ht_p)%clname = 'OPndTck'
	796	ssnd(jps_hsnw)%clname = 'OSnwTck'
	797	ssnd(jps_fice1)%clname = 'OIceFrd'
[3294]	798	IF( k_ice /= 0 ) THEN
[9019]	799	ssnd(jps_fice)%laction = .TRUE. ! if ice treated in the ocean (even in climato case)
	800	ssnd(jps_fice1)%laction = .TRUE. ! First-order regridded ice concentration, to be used producing atmos-to-ice fluxes (Met Office requirement)
[3294]	801	! Currently no namelist entry to determine sending of multi-category ice fraction so use the thickness entry for now
[12182]	802	IF( TRIM( sn_snd_thick%clcat ) == 'yes' ) ssnd(jps_fice)%nct = nn_cats_cpl
	803	IF( TRIM( sn_snd_thick1%clcat ) == 'yes' ) ssnd(jps_fice1)%nct = nn_cats_cpl
[3294]	804	ENDIF
[5407]	805
[12182]	806	IF(TRIM( sn_snd_ifrac%cldes ) == 'coupled') ssnd(jps_ficet)%laction = .TRUE.
[7646]	807
[3294]	808	SELECT CASE ( TRIM( sn_snd_thick%cldes ) )
[3680]	809	CASE( 'none' ) ! nothing to do
	810	CASE( 'ice and snow' )
[3294]	811	ssnd(jps_hice:jps_hsnw)%laction = .TRUE.
[12182]	812	IF( TRIM( sn_snd_thick%clcat ) == 'yes' ) THEN
[9019]	813	ssnd(jps_hice:jps_hsnw)%nct = nn_cats_cpl
[3294]	814	ENDIF
	815	CASE ( 'weighted ice and snow' )
	816	ssnd(jps_hice:jps_hsnw)%laction = .TRUE.
[12182]	817	IF( TRIM( sn_snd_thick%clcat ) == 'yes' ) ssnd(jps_hice:jps_hsnw)%nct = nn_cats_cpl
[3294]	818	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_thick%cldes' )
	819	END SELECT
	820
[9019]	821	! ! ------------------------- !
	822	! ! Ice Meltponds !
	823	! ! ------------------------- !
	824	! Needed by Met Office
	825	ssnd(jps_a_p)%clname = 'OPndFrc'
	826	ssnd(jps_ht_p)%clname = 'OPndTck'
	827	SELECT CASE ( TRIM( sn_snd_mpnd%cldes ) )
	828	CASE ( 'none' )
	829	ssnd(jps_a_p)%laction = .FALSE.
	830	ssnd(jps_ht_p)%laction = .FALSE.
	831	CASE ( 'ice only' )
	832	ssnd(jps_a_p)%laction = .TRUE.
	833	ssnd(jps_ht_p)%laction = .TRUE.
[12182]	834	IF( TRIM( sn_snd_mpnd%clcat ) == 'yes' ) THEN
[9019]	835	ssnd(jps_a_p)%nct = nn_cats_cpl
	836	ssnd(jps_ht_p)%nct = nn_cats_cpl
	837	ELSE
[12182]	838	IF( nn_cats_cpl > 1 ) THEN
[9019]	839	CALL ctl_stop( 'sbc_cpl_init: use weighted ice option for sn_snd_mpnd%cldes if not exchanging category fields' )
	840	ENDIF
	841	ENDIF
	842	CASE ( 'weighted ice' )
	843	ssnd(jps_a_p)%laction = .TRUE.
	844	ssnd(jps_ht_p)%laction = .TRUE.
[12182]	845	IF( TRIM( sn_snd_mpnd%clcat ) == 'yes' ) THEN
[9019]	846	ssnd(jps_a_p)%nct = nn_cats_cpl
	847	ssnd(jps_ht_p)%nct = nn_cats_cpl
	848	ENDIF
	849	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_mpnd%cldes; '//sn_snd_mpnd%cldes )
	850	END SELECT
	851
[1218]	852	! ! ------------------------- !
	853	! ! Surface current !
	854	! ! ------------------------- !
	855	! ocean currents ! ice velocities
	856	ssnd(jps_ocx1)%clname = 'O_OCurx1' ; ssnd(jps_ivx1)%clname = 'O_IVelx1'
	857	ssnd(jps_ocy1)%clname = 'O_OCury1' ; ssnd(jps_ivy1)%clname = 'O_IVely1'
	858	ssnd(jps_ocz1)%clname = 'O_OCurz1' ; ssnd(jps_ivz1)%clname = 'O_IVelz1'
[7646]	859	ssnd(jps_ocxw)%clname = 'O_OCurxw'
	860	ssnd(jps_ocyw)%clname = 'O_OCuryw'
[1218]	861	!
[2090]	862	ssnd(jps_ocx1:jps_ivz1)%nsgn = -1. ! vectors: change of the sign at the north fold
[1218]	863
[3294]	864	IF( sn_snd_crt%clvgrd == 'U,V' ) THEN
	865	ssnd(jps_ocx1)%clgrid = 'U' ; ssnd(jps_ocy1)%clgrid = 'V'
	866	ELSE IF( sn_snd_crt%clvgrd /= 'T' ) THEN
	867	CALL ctl_stop( 'sn_snd_crt%clvgrd must be equal to T' )
	868	ENDIF
[1226]	869	ssnd(jps_ocx1:jps_ivz1)%laction = .TRUE. ! default: all are send
[3294]	870	IF( TRIM( sn_snd_crt%clvref ) == 'spherical' ) ssnd( (/jps_ocz1, jps_ivz1/) )%laction = .FALSE.
	871	IF( TRIM( sn_snd_crt%clvor ) == 'eastward-northward' ) ssnd(jps_ocx1:jps_ivz1)%nsgn = 1.
	872	SELECT CASE( TRIM( sn_snd_crt%cldes ) )
[1226]	873	CASE( 'none' ) ; ssnd(jps_ocx1:jps_ivz1)%laction = .FALSE.
	874	CASE( 'oce only' ) ; ssnd(jps_ivx1:jps_ivz1)%laction = .FALSE.
[1218]	875	CASE( 'weighted oce and ice' ) ! nothing to do
[1226]	876	CASE( 'mixed oce-ice' ) ; ssnd(jps_ivx1:jps_ivz1)%laction = .FALSE.
[3294]	877	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_crt%cldes' )
[1218]	878	END SELECT
	879
[7646]	880	ssnd(jps_ocxw:jps_ocyw)%nsgn = -1. ! vectors: change of the sign at the north fold
	881
	882	IF( sn_snd_crtw%clvgrd == 'U,V' ) THEN
	883	ssnd(jps_ocxw)%clgrid = 'U' ; ssnd(jps_ocyw)%clgrid = 'V'
	884	ELSE IF( sn_snd_crtw%clvgrd /= 'T' ) THEN
	885	CALL ctl_stop( 'sn_snd_crtw%clvgrd must be equal to T' )
	886	ENDIF
	887	IF( TRIM( sn_snd_crtw%clvor ) == 'eastward-northward' ) ssnd(jps_ocxw:jps_ocyw)%nsgn = 1.
	888	SELECT CASE( TRIM( sn_snd_crtw%cldes ) )
	889	CASE( 'none' ) ; ssnd(jps_ocxw:jps_ocyw)%laction = .FALSE.
	890	CASE( 'oce only' ) ; ssnd(jps_ocxw:jps_ocyw)%laction = .TRUE.
	891	CASE( 'weighted oce and ice' ) ! nothing to do
	892	CASE( 'mixed oce-ice' ) ; ssnd(jps_ivx1:jps_ivz1)%laction = .FALSE.
	893	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_crtw%cldes' )
	894	END SELECT
	895
[1534]	896	! ! ------------------------- !
	897	! ! CO2 flux !
	898	! ! ------------------------- !
[3294]	899	ssnd(jps_co2)%clname = 'O_CO2FLX' ; IF( TRIM(sn_snd_co2%cldes) == 'coupled' ) ssnd(jps_co2 )%laction = .TRUE.
[9019]	900	!
	901	! ! ------------------------- !
	902	! ! Sea surface freezing temp !
	903	! ! ------------------------- !
	904	! needed by Met Office
	905	ssnd(jps_sstfrz)%clname = 'O_SSTFrz' ; IF( TRIM(sn_snd_sstfrz%cldes) == 'coupled' ) ssnd(jps_sstfrz)%laction = .TRUE.
	906	!
	907	! ! ------------------------- !
	908	! ! Ice conductivity !
	909	! ! ------------------------- !
	910	! needed by Met Office
	911	! Note that ultimately we will move to passing an ocean effective conductivity as well so there
	912	! will be some changes to the parts of the code which currently relate only to ice conductivity
	913	ssnd(jps_ttilyr )%clname = 'O_TtiLyr'
	914	SELECT CASE ( TRIM( sn_snd_ttilyr%cldes ) )
	915	CASE ( 'none' )
	916	ssnd(jps_ttilyr)%laction = .FALSE.
	917	CASE ( 'ice only' )
	918	ssnd(jps_ttilyr)%laction = .TRUE.
[12182]	919	IF( TRIM( sn_snd_ttilyr%clcat ) == 'yes' ) THEN
[9019]	920	ssnd(jps_ttilyr)%nct = nn_cats_cpl
	921	ELSE
[12182]	922	IF( nn_cats_cpl > 1 ) THEN
[9019]	923	CALL ctl_stop( 'sbc_cpl_init: use weighted ice option for sn_snd_ttilyr%cldes if not exchanging category fields' )
	924	ENDIF
	925	ENDIF
	926	CASE ( 'weighted ice' )
	927	ssnd(jps_ttilyr)%laction = .TRUE.
[12182]	928	IF( TRIM( sn_snd_ttilyr%clcat ) == 'yes' ) ssnd(jps_ttilyr)%nct = nn_cats_cpl
[9019]	929	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_ttilyr%cldes;'//sn_snd_ttilyr%cldes )
	930	END SELECT
[5407]	931
[9019]	932	ssnd(jps_kice )%clname = 'OIceKn'
	933	SELECT CASE ( TRIM( sn_snd_cond%cldes ) )
	934	CASE ( 'none' )
	935	ssnd(jps_kice)%laction = .FALSE.
	936	CASE ( 'ice only' )
	937	ssnd(jps_kice)%laction = .TRUE.
[12182]	938	IF( TRIM( sn_snd_cond%clcat ) == 'yes' ) THEN
[9019]	939	ssnd(jps_kice)%nct = nn_cats_cpl
	940	ELSE
[12182]	941	IF( nn_cats_cpl > 1 ) THEN
[9019]	942	CALL ctl_stop( 'sbc_cpl_init: use weighted ice option for sn_snd_cond%cldes if not exchanging category fields' )
	943	ENDIF
	944	ENDIF
	945	CASE ( 'weighted ice' )
	946	ssnd(jps_kice)%laction = .TRUE.
[12182]	947	IF( TRIM( sn_snd_cond%clcat ) == 'yes' ) ssnd(jps_kice)%nct = nn_cats_cpl
[9019]	948	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_cond%cldes;'//sn_snd_cond%cldes )
	949	END SELECT
	950	!
[7646]	951	! ! ------------------------- !
	952	! ! Sea surface height !
	953	! ! ------------------------- !
	954	ssnd(jps_wlev)%clname = 'O_Wlevel' ; IF( TRIM(sn_snd_wlev%cldes) == 'coupled' ) ssnd(jps_wlev)%laction = .TRUE.
	955
[5407]	956	! ! ------------------------------- !
	957	! ! OPA-SAS coupling - snd by opa !
	958	! ! ------------------------------- !
	959	ssnd(jps_ssh )%clname = 'O_SSHght'
	960	ssnd(jps_soce )%clname = 'O_SSSal'
	961	ssnd(jps_e3t1st)%clname = 'O_E3T1st'
	962	ssnd(jps_fraqsr)%clname = 'O_FraQsr'
[1534]	963	!
[5407]	964	IF( nn_components == jp_iam_opa ) THEN
	965	ssnd(:)%laction = .FALSE. ! force default definition in case of opa <-> sas coupling
	966	ssnd( (/jps_toce, jps_soce, jps_ssh, jps_fraqsr, jps_ocx1, jps_ocy1/) )%laction = .TRUE.
[6140]	967	ssnd( jps_e3t1st )%laction = .NOT.ln_linssh
[5407]	968	! vector definition: not used but cleaner...
	969	ssnd(jps_ocx1)%clgrid = 'U' ! oce components given at U-point
	970	ssnd(jps_ocy1)%clgrid = 'V' ! and V-point
	971	sn_snd_crt%clvgrd = 'U,V'
	972	sn_snd_crt%clvor = 'local grid'
	973	sn_snd_crt%clvref = 'spherical'
	974	!
	975	IF(lwp) THEN ! control print
	976	WRITE(numout,*)
	977	WRITE(numout,*)' sent fields to SAS component '
[7646]	978	WRITE(numout,*)' sea surface temperature (T before, Celsius) '
[5407]	979	WRITE(numout,*)' sea surface salinity '
	980	WRITE(numout,*)' surface currents U,V on local grid and spherical coordinates'
	981	WRITE(numout,*)' sea surface height '
	982	WRITE(numout,*)' thickness of first ocean T level '
	983	WRITE(numout,*)' fraction of solar net radiation absorbed in the first ocean level'
	984	WRITE(numout,*)
	985	ENDIF
	986	ENDIF
	987	! ! ------------------------------- !
	988	! ! OPA-SAS coupling - snd by sas !
	989	! ! ------------------------------- !
	990	ssnd(jps_sflx )%clname = 'I_SFLX'
	991	ssnd(jps_fice2 )%clname = 'IIceFrc'
	992	ssnd(jps_qsroce)%clname = 'I_QsrOce'
	993	ssnd(jps_qnsoce)%clname = 'I_QnsOce'
	994	ssnd(jps_oemp )%clname = 'IOEvaMPr'
	995	ssnd(jps_otx1 )%clname = 'I_OTaux1'
	996	ssnd(jps_oty1 )%clname = 'I_OTauy1'
	997	ssnd(jps_rnf )%clname = 'I_Runoff'
	998	ssnd(jps_taum )%clname = 'I_TauMod'
	999	!
	1000	IF( nn_components == jp_iam_sas ) THEN
	1001	IF( .NOT. ln_cpl ) ssnd(:)%laction = .FALSE. ! force default definition in case of opa <-> sas coupling
	1002	ssnd( (/jps_qsroce, jps_qnsoce, jps_oemp, jps_fice2, jps_sflx, jps_otx1, jps_oty1, jps_taum/) )%laction = .TRUE.
	1003	!
	1004	! Change first letter to couple with atmosphere if already coupled with sea_ice
	1005	! this is nedeed as each variable name used in the namcouple must be unique:
	1006	! for example O_SSTSST sent by OPA to SAS and therefore S_SSTSST sent by SAS to the Atmosphere
	1007	DO jn = 1, jpsnd
[12182]	1008	IF( ssnd(jn)%clname(1:1) == "O" ) ssnd(jn)%clname = "S"//ssnd(jn)%clname(2:LEN(ssnd(jn)%clname))
[5407]	1009	END DO
	1010	!
	1011	IF(lwp) THEN ! control print
	1012	WRITE(numout,*)
	1013	IF( .NOT. ln_cpl ) THEN
	1014	WRITE(numout,*)' sent fields to OPA component '
	1015	ELSE
	1016	WRITE(numout,*)' Additional sent fields to OPA component : '
	1017	ENDIF
	1018	WRITE(numout,*)' ice cover '
	1019	WRITE(numout,*)' oce only EMP '
	1020	WRITE(numout,*)' salt flux '
	1021	WRITE(numout,*)' mixed oce-ice solar flux '
	1022	WRITE(numout,*)' mixed oce-ice non solar flux '
	1023	WRITE(numout,*)' wind stress U,V components'
	1024	WRITE(numout,*)' wind stress module'
	1025	ENDIF
	1026	ENDIF
	1027
	1028	!
[1218]	1029	! ================================ !
	1030	! initialisation of the coupler !
	1031	! ================================ !
[1226]	1032
[5407]	1033	CALL cpl_define(jprcv, jpsnd, nn_cplmodel)
	1034
[12182]	1035	IF(ln_usecplmask) THEN
[4990]	1036	xcplmask(:,:,:) = 0.
	1037	CALL iom_open( 'cplmask', inum )
	1038	CALL iom_get( inum, jpdom_unknown, 'cplmask', xcplmask(1:nlci,1:nlcj,1:nn_cplmodel), &
	1039	& kstart = (/ mig(1),mjg(1),1 /), kcount = (/ nlci,nlcj,nn_cplmodel /) )
	1040	CALL iom_close( inum )
	1041	ELSE
	1042	xcplmask(:,:,:) = 1.
	1043	ENDIF
[5407]	1044	xcplmask(:,:,0) = 1. - SUM( xcplmask(:,:,1:nn_cplmodel), dim = 3 )
[1218]	1045	!
	1046	END SUBROUTINE sbc_cpl_init
	1047
	1048
[11949]	1049	SUBROUTINE sbc_cpl_rcv( kt, k_fsbc, k_ice, Kbb, Kmm )
[1218]	1050	!!----------------------------------------------------------------------
	1051	!! * ROUTINE sbc_cpl_rcv *
[888]	1052	!!
[1218]	1053	!! ** Purpose : provide the stress over the ocean and, if no sea-ice,
	1054	!! provide the ocean heat and freshwater fluxes.
[888]	1055	!!
[1218]	1056	!! ** Method : - Receive all the atmospheric fields (stored in frcv array). called at each time step.
	1057	!! OASIS controls if there is something do receive or not. nrcvinfo contains the info
	1058	!! to know if the field was really received or not
[888]	1059	!!
[1218]	1060	!! --> If ocean stress was really received:
[888]	1061	!!
[1218]	1062	!! - transform the received ocean stress vector from the received
	1063	!! referential and grid into an atmosphere-ocean stress in
	1064	!! the (i,j) ocean referencial and at the ocean velocity point.
	1065	!! The received stress are :
	1066	!! - defined by 3 components (if cartesian coordinate)
	1067	!! or by 2 components (if spherical)
	1068	!! - oriented along geographical coordinate (if eastward-northward)
	1069	!! or along the local grid coordinate (if local grid)
	1070	!! - given at U- and V-point, resp. if received on 2 grids
	1071	!! or at T-point if received on 1 grid
	1072	!! Therefore and if necessary, they are successively
	1073	!! processed in order to obtain them
	1074	!! first as 2 components on the sphere
	1075	!! second as 2 components oriented along the local grid
	1076	!! third as 2 components on the U,V grid
[888]	1077	!!
[1218]	1078	!! -->
[888]	1079	!!
[1218]	1080	!! - In 'ocean only' case, non solar and solar ocean heat fluxes
	1081	!! and total ocean freshwater fluxes
	1082	!!
	1083	!! ** Method : receive all fields from the atmosphere and transform
	1084	!! them into ocean surface boundary condition fields
	1085	!!
	1086	!! ** Action : update utau, vtau ocean stress at U,V grid
[4990]	1087	!! taum wind stress module at T-point
	1088	!! wndm wind speed module at T-point over free ocean or leads in presence of sea-ice
[3625]	1089	!! qns non solar heat fluxes including emp heat content (ocean only case)
	1090	!! and the latent heat flux of solid precip. melting
	1091	!! qsr solar ocean heat fluxes (ocean only case)
	1092	!! emp upward mass flux [evap. - precip. (- runoffs) (- calving)] (ocean only case)
[888]	1093	!!----------------------------------------------------------------------
[9019]	1094	USE zdf_oce, ONLY : ln_zdfswm
	1095	!
	1096	INTEGER, INTENT(in) :: kt ! ocean model time step index
	1097	INTEGER, INTENT(in) :: k_fsbc ! frequency of sbc (-> ice model) computation
	1098	INTEGER, INTENT(in) :: k_ice ! ice management in the sbc (=0/1/2/3)
[11949]	1099	INTEGER, INTENT(in) :: Kbb, Kmm ! ocean model time level indices
[888]	1100	!!
[5407]	1101	LOGICAL :: llnewtx, llnewtau ! update wind stress components and module??
[1218]	1102	INTEGER :: ji, jj, jn ! dummy loop indices
[6140]	1103	INTEGER :: isec ! number of seconds since nit000 (assuming rdt did not change since nit000)
[1218]	1104	REAL(wp) :: zcumulneg, zcumulpos ! temporary scalars
[1226]	1105	REAL(wp) :: zcoef ! temporary scalar
[1695]	1106	REAL(wp) :: zrhoa = 1.22 ! Air density kg/m3
	1107	REAL(wp) :: zcdrag = 1.5e-3 ! drag coefficient
	1108	REAL(wp) :: zzx, zzy ! temporary variables
[9019]	1109	REAL(wp), DIMENSION(jpi,jpj) :: ztx, zty, zmsk, zemp, zqns, zqsr
[1218]	1110	!!----------------------------------------------------------------------
[3294]	1111	!
[12252]	1112	IF( kt == nit000 ) THEN
	1113	! cannot be done in the init phase when we use agrif as cpl_freq requires that oasis_enddef is done
	1114	ncpl_qsr_freq = cpl_freq( 'O_QsrOce' ) + cpl_freq( 'O_QsrMix' ) + cpl_freq( 'I_QsrOce' ) + cpl_freq( 'I_QsrMix' )
	1115	IF( ln_dm2dc .AND. ncpl_qsr_freq /= 86400 ) &
	1116	& CALL ctl_stop( 'sbc_cpl_rcv: diurnal cycle reconstruction (ln_dm2dc) needs daily couping for solar radiation' )
	1117	ncpl_qsr_freq = 86400 / ncpl_qsr_freq ! used by top
	1118	ENDIF
	1119	!
[5407]	1120	IF( ln_mixcpl ) zmsk(:,:) = 1. - xcplmask(:,:,0)
	1121	!
	1122	! ! ======================================================= !
	1123	! ! Receive all the atmos. fields (including ice information)
	1124	! ! ======================================================= !
[6140]	1125	isec = ( kt - nit000 ) * NINT( rdt ) ! date of exchanges
[5407]	1126	DO jn = 1, jprcv ! received fields sent by the atmosphere
	1127	IF( srcv(jn)%laction ) CALL cpl_rcv( jn, isec, frcv(jn)%z3, xcplmask(:,:,1:nn_cplmodel), nrcvinfo(jn) )
[1218]	1128	END DO
[888]	1129
[1218]	1130	! ! ========================= !
[1696]	1131	IF( srcv(jpr_otx1)%laction ) THEN ! ocean stress components !
[1218]	1132	! ! ========================= !
[3294]	1133	! define frcv(jpr_otx1)%z3(:,:,1) and frcv(jpr_oty1)%z3(:,:,1): stress at U/V point along model grid
[1218]	1134	! => need to be done only when we receive the field
[1698]	1135	IF( nrcvinfo(jpr_otx1) == OASIS_Rcv ) THEN
[1218]	1136	!
[3294]	1137	IF( TRIM( sn_rcv_tau%clvref ) == 'cartesian' ) THEN ! 2 components on the sphere
[1218]	1138	! ! (cartesian to spherical -> 3 to 2 components)
	1139	!
[3294]	1140	CALL geo2oce( frcv(jpr_otx1)%z3(:,:,1), frcv(jpr_oty1)%z3(:,:,1), frcv(jpr_otz1)%z3(:,:,1), &
[1218]	1141	& srcv(jpr_otx1)%clgrid, ztx, zty )
[3294]	1142	frcv(jpr_otx1)%z3(:,:,1) = ztx(:,:) ! overwrite 1st comp. on the 1st grid
	1143	frcv(jpr_oty1)%z3(:,:,1) = zty(:,:) ! overwrite 2nd comp. on the 1st grid
[1218]	1144	!
	1145	IF( srcv(jpr_otx2)%laction ) THEN
[3294]	1146	CALL geo2oce( frcv(jpr_otx2)%z3(:,:,1), frcv(jpr_oty2)%z3(:,:,1), frcv(jpr_otz2)%z3(:,:,1), &
[1218]	1147	& srcv(jpr_otx2)%clgrid, ztx, zty )
[3294]	1148	frcv(jpr_otx2)%z3(:,:,1) = ztx(:,:) ! overwrite 1st comp. on the 2nd grid
	1149	frcv(jpr_oty2)%z3(:,:,1) = zty(:,:) ! overwrite 2nd comp. on the 2nd grid
[1218]	1150	ENDIF
	1151	!
	1152	ENDIF
	1153	!
[3294]	1154	IF( TRIM( sn_rcv_tau%clvor ) == 'eastward-northward' ) THEN ! 2 components oriented along the local grid
[1218]	1155	! ! (geographical to local grid -> rotate the components)
[3294]	1156	CALL rot_rep( frcv(jpr_otx1)%z3(:,:,1), frcv(jpr_oty1)%z3(:,:,1), srcv(jpr_otx1)%clgrid, 'en->i', ztx )
[1218]	1157	IF( srcv(jpr_otx2)%laction ) THEN
[3294]	1158	CALL rot_rep( frcv(jpr_otx2)%z3(:,:,1), frcv(jpr_oty2)%z3(:,:,1), srcv(jpr_otx2)%clgrid, 'en->j', zty )
[7646]	1159	ELSE
[3294]	1160	CALL rot_rep( frcv(jpr_otx1)%z3(:,:,1), frcv(jpr_oty1)%z3(:,:,1), srcv(jpr_otx1)%clgrid, 'en->j', zty )
[1218]	1161	ENDIF
[3632]	1162	frcv(jpr_otx1)%z3(:,:,1) = ztx(:,:) ! overwrite 1st component on the 1st grid
[3294]	1163	frcv(jpr_oty1)%z3(:,:,1) = zty(:,:) ! overwrite 2nd component on the 2nd grid
[1218]	1164	ENDIF
	1165	!
	1166	IF( srcv(jpr_otx1)%clgrid == 'T' ) THEN
	1167	DO jj = 2, jpjm1 ! T ==> (U,V)
	1168	DO ji = fs_2, fs_jpim1 ! vector opt.
[3294]	1169	frcv(jpr_otx1)%z3(ji,jj,1) = 0.5 * ( frcv(jpr_otx1)%z3(ji+1,jj ,1) + frcv(jpr_otx1)%z3(ji,jj,1) )
	1170	frcv(jpr_oty1)%z3(ji,jj,1) = 0.5 * ( frcv(jpr_oty1)%z3(ji ,jj+1,1) + frcv(jpr_oty1)%z3(ji,jj,1) )
[1218]	1171	END DO
	1172	END DO
[10425]	1173	CALL lbc_lnk_multi( 'sbccpl', frcv(jpr_otx1)%z3(:,:,1), 'U', -1., frcv(jpr_oty1)%z3(:,:,1), 'V', -1. )
[1218]	1174	ENDIF
[1696]	1175	llnewtx = .TRUE.
	1176	ELSE
	1177	llnewtx = .FALSE.
[1218]	1178	ENDIF
	1179	! ! ========================= !
	1180	ELSE ! No dynamical coupling !
	1181	! ! ========================= !
[3294]	1182	frcv(jpr_otx1)%z3(:,:,1) = 0.e0 ! here simply set to zero
	1183	frcv(jpr_oty1)%z3(:,:,1) = 0.e0 ! an external read in a file can be added instead
[1696]	1184	llnewtx = .TRUE.
[1218]	1185	!
	1186	ENDIF
[1696]	1187	! ! ========================= !
	1188	! ! wind stress module ! (taum)
	1189	! ! ========================= !
	1190	IF( .NOT. srcv(jpr_taum)%laction ) THEN ! compute wind stress module from its components if not received
	1191	! => need to be done only when otx1 was changed
	1192	IF( llnewtx ) THEN
	1193	DO jj = 2, jpjm1
	1194	DO ji = fs_2, fs_jpim1 ! vect. opt.
[3294]	1195	zzx = frcv(jpr_otx1)%z3(ji-1,jj ,1) + frcv(jpr_otx1)%z3(ji,jj,1)
	1196	zzy = frcv(jpr_oty1)%z3(ji ,jj-1,1) + frcv(jpr_oty1)%z3(ji,jj,1)
	1197	frcv(jpr_taum)%z3(ji,jj,1) = 0.5 * SQRT( zzx * zzx + zzy * zzy )
[1696]	1198	END DO
[1695]	1199	END DO
[10425]	1200	CALL lbc_lnk( 'sbccpl', frcv(jpr_taum)%z3(:,:,1), 'T', 1. )
[1696]	1201	llnewtau = .TRUE.
	1202	ELSE
	1203	llnewtau = .FALSE.
	1204	ENDIF
	1205	ELSE
[1706]	1206	llnewtau = nrcvinfo(jpr_taum) == OASIS_Rcv
[1726]	1207	! Stress module can be negative when received (interpolation problem)
	1208	IF( llnewtau ) THEN
[3625]	1209	frcv(jpr_taum)%z3(:,:,1) = MAX( 0._wp, frcv(jpr_taum)%z3(:,:,1) )
[1726]	1210	ENDIF
[1696]	1211	ENDIF
[5407]	1212	!
[1696]	1213	! ! ========================= !
	1214	! ! 10 m wind speed ! (wndm)
	1215	! ! ========================= !
	1216	IF( .NOT. srcv(jpr_w10m)%laction ) THEN ! compute wind spreed from wind stress module if not received
	1217	! => need to be done only when taumod was changed
	1218	IF( llnewtau ) THEN
[1695]	1219	zcoef = 1. / ( zrhoa * zcdrag )
	1220	DO jj = 1, jpj
	1221	DO ji = 1, jpi
[5407]	1222	frcv(jpr_w10m)%z3(ji,jj,1) = SQRT( frcv(jpr_taum)%z3(ji,jj,1) * zcoef )
[1695]	1223	END DO
	1224	END DO
	1225	ENDIF
[1696]	1226	ENDIF
	1227
[3294]	1228	! u(v)tau and taum will be modified by ice model
[1696]	1229	! -> need to be reset before each call of the ice/fsbc
	1230	IF( MOD( kt-1, k_fsbc ) == 0 ) THEN
	1231	!
[5407]	1232	IF( ln_mixcpl ) THEN
	1233	utau(:,:) = utau(:,:) * xcplmask(:,:,0) + frcv(jpr_otx1)%z3(:,:,1) * zmsk(:,:)
	1234	vtau(:,:) = vtau(:,:) * xcplmask(:,:,0) + frcv(jpr_oty1)%z3(:,:,1) * zmsk(:,:)
	1235	taum(:,:) = taum(:,:) * xcplmask(:,:,0) + frcv(jpr_taum)%z3(:,:,1) * zmsk(:,:)
	1236	wndm(:,:) = wndm(:,:) * xcplmask(:,:,0) + frcv(jpr_w10m)%z3(:,:,1) * zmsk(:,:)
	1237	ELSE
	1238	utau(:,:) = frcv(jpr_otx1)%z3(:,:,1)
	1239	vtau(:,:) = frcv(jpr_oty1)%z3(:,:,1)
	1240	taum(:,:) = frcv(jpr_taum)%z3(:,:,1)
	1241	wndm(:,:) = frcv(jpr_w10m)%z3(:,:,1)
	1242	ENDIF
[1705]	1243	CALL iom_put( "taum_oce", taum ) ! output wind stress module
[1695]	1244	!
[1218]	1245	ENDIF
[3294]	1246
[5407]	1247	! ! ================== !
	1248	! ! atmosph. CO2 (ppm) !
	1249	! ! ================== !
[3294]	1250	IF( srcv(jpr_co2)%laction ) atm_co2(:,:) = frcv(jpr_co2)%z3(:,:,1)
[9019]	1251	!
[7646]	1252	! ! ========================= !
	1253	! ! Mean Sea Level Pressure ! (taum)
	1254	! ! ========================= !
	1255	IF( srcv(jpr_mslp)%laction ) THEN ! UKMO SHELF effect of atmospheric pressure on SSH
	1256	IF( kt /= nit000 ) ssh_ibb(:,:) = ssh_ib(:,:) !* Swap of ssh_ib fields
[3294]	1257
[7646]	1258	r1_grau = 1.e0 / (grav * rau0) !* constant for optimization
	1259	ssh_ib(:,:) = - ( frcv(jpr_mslp)%z3(:,:,1) - rpref ) * r1_grau ! equivalent ssh (inverse barometer)
	1260	apr (:,:) = frcv(jpr_mslp)%z3(:,:,1) !atmospheric pressure
	1261
	1262	IF( kt == nit000 ) ssh_ibb(:,:) = ssh_ib(:,:) ! correct this later (read from restart if possible)
[12182]	1263	ENDIF
[7646]	1264	!
	1265	IF( ln_sdw ) THEN ! Stokes Drift correction activated
[9023]	1266	! ! ========================= !
	1267	! ! Stokes drift u !
	1268	! ! ========================= !
	1269	IF( srcv(jpr_sdrftx)%laction ) ut0sd(:,:) = frcv(jpr_sdrftx)%z3(:,:,1)
	1270	!
	1271	! ! ========================= !
	1272	! ! Stokes drift v !
	1273	! ! ========================= !
	1274	IF( srcv(jpr_sdrfty)%laction ) vt0sd(:,:) = frcv(jpr_sdrfty)%z3(:,:,1)
	1275	!
	1276	! ! ========================= !
	1277	! ! Wave mean period !
	1278	! ! ========================= !
	1279	IF( srcv(jpr_wper)%laction ) wmp(:,:) = frcv(jpr_wper)%z3(:,:,1)
	1280	!
	1281	! ! ========================= !
	1282	! ! Significant wave height !
	1283	! ! ========================= !
	1284	IF( srcv(jpr_hsig)%laction ) hsw(:,:) = frcv(jpr_hsig)%z3(:,:,1)
	1285	!
	1286	! ! ========================= !
	1287	! ! Wave peak frequency !
	1288	! ! ========================= !
	1289	IF( srcv(jpr_wfreq)%laction ) wfreq(:,:) = frcv(jpr_wfreq)%z3(:,:,1)
	1290	!
	1291	! ! ========================= !
	1292	! ! Vertical mixing Qiao !
	1293	! ! ========================= !
[9033]	1294	IF( srcv(jpr_wnum)%laction .AND. ln_zdfswm ) wnum(:,:) = frcv(jpr_wnum)%z3(:,:,1)
[7646]	1295
	1296	! Calculate the 3D Stokes drift both in coupled and not fully uncoupled mode
	1297	IF( srcv(jpr_sdrftx)%laction .OR. srcv(jpr_sdrfty)%laction .OR. srcv(jpr_wper)%laction &
[9023]	1298	.OR. srcv(jpr_hsig)%laction .OR. srcv(jpr_wfreq)%laction) THEN
[11949]	1299	CALL sbc_stokes( Kmm )
[7646]	1300	ENDIF
	1301	ENDIF
	1302	! ! ========================= !
	1303	! ! Stress adsorbed by waves !
	1304	! ! ========================= !
[9034]	1305	IF( srcv(jpr_tauwoc)%laction .AND. ln_tauwoc ) tauoc_wave(:,:) = frcv(jpr_tauwoc)%z3(:,:,1)
[7646]	1306
[9023]	1307	! ! ========================= !
	1308	! ! Stress component by waves !
	1309	! ! ========================= !
	1310	IF( srcv(jpr_tauwx)%laction .AND. srcv(jpr_tauwy)%laction .AND. ln_tauw ) THEN
	1311	tauw_x(:,:) = frcv(jpr_tauwx)%z3(:,:,1)
	1312	tauw_y(:,:) = frcv(jpr_tauwy)%z3(:,:,1)
	1313	ENDIF
	1314
[7646]	1315	! ! ========================= !
	1316	! ! Wave drag coefficient !
	1317	! ! ========================= !
[9019]	1318	IF( srcv(jpr_wdrag)%laction .AND. ln_cdgw ) cdn_wave(:,:) = frcv(jpr_wdrag)%z3(:,:,1)
[7646]	1319
[5407]	1320	! Fields received by SAS when OASIS coupling
	1321	! (arrays no more filled at sbcssm stage)
	1322	! ! ================== !
	1323	! ! SSS !
	1324	! ! ================== !
	1325	IF( srcv(jpr_soce)%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1326	sss_m(:,:) = frcv(jpr_soce)%z3(:,:,1)
	1327	CALL iom_put( 'sss_m', sss_m )
	1328	ENDIF
	1329	!
	1330	! ! ================== !
	1331	! ! SST !
	1332	! ! ================== !
	1333	IF( srcv(jpr_toce)%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1334	sst_m(:,:) = frcv(jpr_toce)%z3(:,:,1)
[6489]	1335	IF( srcv(jpr_soce)%laction .AND. l_useCT ) THEN ! make sure that sst_m is the potential temperature
[5407]	1336	sst_m(:,:) = eos_pt_from_ct( sst_m(:,:), sss_m(:,:) )
	1337	ENDIF
	1338	ENDIF
	1339	! ! ================== !
	1340	! ! SSH !
	1341	! ! ================== !
	1342	IF( srcv(jpr_ssh )%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1343	ssh_m(:,:) = frcv(jpr_ssh )%z3(:,:,1)
	1344	CALL iom_put( 'ssh_m', ssh_m )
	1345	ENDIF
	1346	! ! ================== !
	1347	! ! surface currents !
	1348	! ! ================== !
	1349	IF( srcv(jpr_ocx1)%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1350	ssu_m(:,:) = frcv(jpr_ocx1)%z3(:,:,1)
[11949]	1351	uu(:,:,1,Kbb) = ssu_m(:,:) ! will be used in icestp in the call of ice_forcing_tau
	1352	uu(:,:,1,Kmm) = ssu_m(:,:) ! will be used in sbc_cpl_snd if atmosphere coupling
[5407]	1353	CALL iom_put( 'ssu_m', ssu_m )
	1354	ENDIF
	1355	IF( srcv(jpr_ocy1)%laction ) THEN
	1356	ssv_m(:,:) = frcv(jpr_ocy1)%z3(:,:,1)
[11949]	1357	vv(:,:,1,Kbb) = ssv_m(:,:) ! will be used in icestp in the call of ice_forcing_tau
	1358	vv(:,:,1,Kmm) = ssv_m(:,:) ! will be used in sbc_cpl_snd if atmosphere coupling
[5407]	1359	CALL iom_put( 'ssv_m', ssv_m )
	1360	ENDIF
	1361	! ! ======================== !
	1362	! ! first T level thickness !
	1363	! ! ======================== !
	1364	IF( srcv(jpr_e3t1st )%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1365	e3t_m(:,:) = frcv(jpr_e3t1st )%z3(:,:,1)
	1366	CALL iom_put( 'e3t_m', e3t_m(:,:) )
	1367	ENDIF
	1368	! ! ================================ !
	1369	! ! fraction of solar net radiation !
	1370	! ! ================================ !
	1371	IF( srcv(jpr_fraqsr)%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1372	frq_m(:,:) = frcv(jpr_fraqsr)%z3(:,:,1)
	1373	CALL iom_put( 'frq_m', frq_m )
	1374	ENDIF
	1375
[1218]	1376	! ! ========================= !
[5407]	1377	IF( k_ice <= 1 .AND. MOD( kt-1, k_fsbc ) == 0 ) THEN ! heat & freshwater fluxes ! (Ocean only case)
[1218]	1378	! ! ========================= !
	1379	!
[3625]	1380	! ! total freshwater fluxes over the ocean (emp)
[5407]	1381	IF( srcv(jpr_oemp)%laction .OR. srcv(jpr_rain)%laction ) THEN
	1382	SELECT CASE( TRIM( sn_rcv_emp%cldes ) ) ! evaporation - precipitation
	1383	CASE( 'conservative' )
	1384	zemp(:,:) = frcv(jpr_tevp)%z3(:,:,1) - ( frcv(jpr_rain)%z3(:,:,1) + frcv(jpr_snow)%z3(:,:,1) )
	1385	CASE( 'oce only', 'oce and ice' )
	1386	zemp(:,:) = frcv(jpr_oemp)%z3(:,:,1)
	1387	CASE default
	1388	CALL ctl_stop( 'sbc_cpl_rcv: wrong definition of sn_rcv_emp%cldes' )
	1389	END SELECT
	1390	ELSE
	1391	zemp(:,:) = 0._wp
	1392	ENDIF
[1218]	1393	!
	1394	! ! runoffs and calving (added in emp)
[5407]	1395	IF( srcv(jpr_rnf)%laction ) rnf(:,:) = frcv(jpr_rnf)%z3(:,:,1)
	1396	IF( srcv(jpr_cal)%laction ) zemp(:,:) = zemp(:,:) - frcv(jpr_cal)%z3(:,:,1)
[7788]	1397
	1398	IF( srcv(jpr_icb)%laction ) THEN
	1399	fwficb(:,:) = frcv(jpr_icb)%z3(:,:,1)
	1400	rnf(:,:) = rnf(:,:) + fwficb(:,:) ! iceberg added to runfofs
	1401	ENDIF
[12150]	1402	!
	1403	! ice shelf fwf
	1404	IF( srcv(jpr_isf)%laction ) THEN
	1405	fwfisf_oasis(:,:) = - frcv(jpr_isf)%z3(:,:,1) ! fresh water flux from the isf (fwfisf <0 mean melting)
	1406	END IF
[7788]	1407
[5407]	1408	IF( ln_mixcpl ) THEN ; emp(:,:) = emp(:,:) * xcplmask(:,:,0) + zemp(:,:) * zmsk(:,:)
	1409	ELSE ; emp(:,:) = zemp(:,:)
	1410	ENDIF
[1218]	1411	!
[3625]	1412	! ! non solar heat flux over the ocean (qns)
[5407]	1413	IF( srcv(jpr_qnsoce)%laction ) THEN ; zqns(:,:) = frcv(jpr_qnsoce)%z3(:,:,1)
	1414	ELSE IF( srcv(jpr_qnsmix)%laction ) THEN ; zqns(:,:) = frcv(jpr_qnsmix)%z3(:,:,1)
	1415	ELSE ; zqns(:,:) = 0._wp
[12182]	1416	ENDIF
[4990]	1417	! update qns over the free ocean with:
[5407]	1418	IF( nn_components /= jp_iam_opa ) THEN
	1419	zqns(:,:) = zqns(:,:) - zemp(:,:) * sst_m(:,:) * rcp ! remove heat content due to mass flux (assumed to be at SST)
	1420	IF( srcv(jpr_snow )%laction ) THEN
[9935]	1421	zqns(:,:) = zqns(:,:) - frcv(jpr_snow)%z3(:,:,1) * rLfus ! energy for melting solid precipitation over the free ocean
[5407]	1422	ENDIF
[3625]	1423	ENDIF
[7788]	1424	!
[9935]	1425	IF( srcv(jpr_icb)%laction ) zqns(:,:) = zqns(:,:) - frcv(jpr_icb)%z3(:,:,1) * rLfus ! remove heat content associated to iceberg melting
[7788]	1426	!
[5407]	1427	IF( ln_mixcpl ) THEN ; qns(:,:) = qns(:,:) * xcplmask(:,:,0) + zqns(:,:) * zmsk(:,:)
	1428	ELSE ; qns(:,:) = zqns(:,:)
	1429	ENDIF
[3625]	1430
	1431	! ! solar flux over the ocean (qsr)
[5407]	1432	IF ( srcv(jpr_qsroce)%laction ) THEN ; zqsr(:,:) = frcv(jpr_qsroce)%z3(:,:,1)
	1433	ELSE IF( srcv(jpr_qsrmix)%laction ) then ; zqsr(:,:) = frcv(jpr_qsrmix)%z3(:,:,1)
	1434	ELSE ; zqsr(:,:) = 0._wp
	1435	ENDIF
	1436	IF( ln_dm2dc .AND. ln_cpl ) zqsr(:,:) = sbc_dcy( zqsr ) ! modify qsr to include the diurnal cycle
	1437	IF( ln_mixcpl ) THEN ; qsr(:,:) = qsr(:,:) * xcplmask(:,:,0) + zqsr(:,:) * zmsk(:,:)
	1438	ELSE ; qsr(:,:) = zqsr(:,:)
	1439	ENDIF
[3625]	1440	!
[5407]	1441	! salt flux over the ocean (received by opa in case of opa <-> sas coupling)
	1442	IF( srcv(jpr_sflx )%laction ) sfx(:,:) = frcv(jpr_sflx )%z3(:,:,1)
	1443	! Ice cover (received by opa in case of opa <-> sas coupling)
	1444	IF( srcv(jpr_fice )%laction ) fr_i(:,:) = frcv(jpr_fice )%z3(:,:,1)
	1445	!
[1218]	1446	ENDIF
	1447	!
	1448	END SUBROUTINE sbc_cpl_rcv
	1449
	1450
	1451	SUBROUTINE sbc_cpl_ice_tau( p_taui, p_tauj )
	1452	!!----------------------------------------------------------------------
	1453	!! * ROUTINE sbc_cpl_ice_tau *
	1454	!!
	1455	!! ** Purpose : provide the stress over sea-ice in coupled mode
	1456	!!
	1457	!! ** Method : transform the received stress from the atmosphere into
	1458	!! an atmosphere-ice stress in the (i,j) ocean referencial
[9767]	1459	!! and at the velocity point of the sea-ice model:
[1218]	1460	!! 'C'-grid : i- (j-) components given at U- (V-) point
	1461	!!
	1462	!! The received stress are :
	1463	!! - defined by 3 components (if cartesian coordinate)
	1464	!! or by 2 components (if spherical)
	1465	!! - oriented along geographical coordinate (if eastward-northward)
	1466	!! or along the local grid coordinate (if local grid)
	1467	!! - given at U- and V-point, resp. if received on 2 grids
	1468	!! or at a same point (T or I) if received on 1 grid
	1469	!! Therefore and if necessary, they are successively
	1470	!! processed in order to obtain them
	1471	!! first as 2 components on the sphere
	1472	!! second as 2 components oriented along the local grid
[9767]	1473	!! third as 2 components on the ice grid point
[1218]	1474	!!
[4148]	1475	!! Except in 'oce and ice' case, only one vector stress field
[1218]	1476	!! is received. It has already been processed in sbc_cpl_rcv
	1477	!! so that it is now defined as (i,j) components given at U-
[9767]	1478	!! and V-points, respectively.
[1218]	1479	!!
[9767]	1480	!! ** Action : return ptau_i, ptau_j, the stress over the ice
[1218]	1481	!!----------------------------------------------------------------------
[2715]	1482	REAL(wp), INTENT(out), DIMENSION(:,:) :: p_taui ! i- & j-components of atmos-ice stress [N/m2]
	1483	REAL(wp), INTENT(out), DIMENSION(:,:) :: p_tauj ! at I-point (B-grid) or U & V-point (C-grid)
	1484	!!
[6140]	1485	INTEGER :: ji, jj ! dummy loop indices
	1486	INTEGER :: itx ! index of taux over ice
[9019]	1487	REAL(wp), DIMENSION(jpi,jpj) :: ztx, zty
[1218]	1488	!!----------------------------------------------------------------------
[3294]	1489	!
[4990]	1490	IF( srcv(jpr_itx1)%laction ) THEN ; itx = jpr_itx1
[1218]	1491	ELSE ; itx = jpr_otx1
	1492	ENDIF
	1493
	1494	! do something only if we just received the stress from atmosphere
[1698]	1495	IF( nrcvinfo(itx) == OASIS_Rcv ) THEN
[4990]	1496	! ! ======================= !
	1497	IF( srcv(jpr_itx1)%laction ) THEN ! ice stress received !
	1498	! ! ======================= !
[1218]	1499	!
[3294]	1500	IF( TRIM( sn_rcv_tau%clvref ) == 'cartesian' ) THEN ! 2 components on the sphere
[1218]	1501	! ! (cartesian to spherical -> 3 to 2 components)
[3294]	1502	CALL geo2oce( frcv(jpr_itx1)%z3(:,:,1), frcv(jpr_ity1)%z3(:,:,1), frcv(jpr_itz1)%z3(:,:,1), &
[1218]	1503	& srcv(jpr_itx1)%clgrid, ztx, zty )
[3294]	1504	frcv(jpr_itx1)%z3(:,:,1) = ztx(:,:) ! overwrite 1st comp. on the 1st grid
	1505	frcv(jpr_ity1)%z3(:,:,1) = zty(:,:) ! overwrite 2nd comp. on the 1st grid
[1218]	1506	!
	1507	IF( srcv(jpr_itx2)%laction ) THEN
[3294]	1508	CALL geo2oce( frcv(jpr_itx2)%z3(:,:,1), frcv(jpr_ity2)%z3(:,:,1), frcv(jpr_itz2)%z3(:,:,1), &
[1218]	1509	& srcv(jpr_itx2)%clgrid, ztx, zty )
[3294]	1510	frcv(jpr_itx2)%z3(:,:,1) = ztx(:,:) ! overwrite 1st comp. on the 2nd grid
	1511	frcv(jpr_ity2)%z3(:,:,1) = zty(:,:) ! overwrite 2nd comp. on the 2nd grid
[1218]	1512	ENDIF
	1513	!
[888]	1514	ENDIF
[1218]	1515	!
[3294]	1516	IF( TRIM( sn_rcv_tau%clvor ) == 'eastward-northward' ) THEN ! 2 components oriented along the local grid
[1218]	1517	! ! (geographical to local grid -> rotate the components)
[3294]	1518	CALL rot_rep( frcv(jpr_itx1)%z3(:,:,1), frcv(jpr_ity1)%z3(:,:,1), srcv(jpr_itx1)%clgrid, 'en->i', ztx )
[1218]	1519	IF( srcv(jpr_itx2)%laction ) THEN
[3294]	1520	CALL rot_rep( frcv(jpr_itx2)%z3(:,:,1), frcv(jpr_ity2)%z3(:,:,1), srcv(jpr_itx2)%clgrid, 'en->j', zty )
[1218]	1521	ELSE
[3294]	1522	CALL rot_rep( frcv(jpr_itx1)%z3(:,:,1), frcv(jpr_ity1)%z3(:,:,1), srcv(jpr_itx1)%clgrid, 'en->j', zty )
[1218]	1523	ENDIF
[3632]	1524	frcv(jpr_itx1)%z3(:,:,1) = ztx(:,:) ! overwrite 1st component on the 1st grid
[3294]	1525	frcv(jpr_ity1)%z3(:,:,1) = zty(:,:) ! overwrite 2nd component on the 1st grid
[1218]	1526	ENDIF
	1527	! ! ======================= !
	1528	ELSE ! use ocean stress !
	1529	! ! ======================= !
[3294]	1530	frcv(jpr_itx1)%z3(:,:,1) = frcv(jpr_otx1)%z3(:,:,1)
	1531	frcv(jpr_ity1)%z3(:,:,1) = frcv(jpr_oty1)%z3(:,:,1)
[1218]	1532	!
	1533	ENDIF
	1534	! ! ======================= !
	1535	! ! put on ice grid !
	1536	! ! ======================= !
	1537	!
	1538	! j+1 j -----V---F
[9767]	1539	! ice stress on ice velocity point ! \|
	1540	! (C-grid ==>(U,V)) j \| T U
[1218]	1541	! \| \|
	1542	! j j-1 -I-------\|
	1543	! (for I) \| \|
	1544	! i-1 i i
	1545	! i i+1 (for I)
[9767]	1546	SELECT CASE ( srcv(jpr_itx1)%clgrid )
	1547	CASE( 'U' )
	1548	p_taui(:,:) = frcv(jpr_itx1)%z3(:,:,1) ! (U,V) ==> (U,V)
	1549	p_tauj(:,:) = frcv(jpr_ity1)%z3(:,:,1)
	1550	CASE( 'F' )
	1551	DO jj = 2, jpjm1 ! F ==> (U,V)
	1552	DO ji = fs_2, fs_jpim1 ! vector opt.
	1553	p_taui(ji,jj) = 0.5 * ( frcv(jpr_itx1)%z3(ji,jj,1) + frcv(jpr_itx1)%z3(ji ,jj-1,1) )
	1554	p_tauj(ji,jj) = 0.5 * ( frcv(jpr_ity1)%z3(ji,jj,1) + frcv(jpr_ity1)%z3(ji-1,jj ,1) )
[1218]	1555	END DO
[9767]	1556	END DO
	1557	CASE( 'T' )
	1558	DO jj = 2, jpjm1 ! T ==> (U,V)
	1559	DO ji = fs_2, fs_jpim1 ! vector opt.
	1560	p_taui(ji,jj) = 0.5 * ( frcv(jpr_itx1)%z3(ji+1,jj ,1) + frcv(jpr_itx1)%z3(ji,jj,1) )
	1561	p_tauj(ji,jj) = 0.5 * ( frcv(jpr_ity1)%z3(ji ,jj+1,1) + frcv(jpr_ity1)%z3(ji,jj,1) )
[1218]	1562	END DO
[9767]	1563	END DO
	1564	CASE( 'I' )
	1565	DO jj = 2, jpjm1 ! I ==> (U,V)
	1566	DO ji = 2, jpim1 ! NO vector opt.
	1567	p_taui(ji,jj) = 0.5 * ( frcv(jpr_itx1)%z3(ji+1,jj+1,1) + frcv(jpr_itx1)%z3(ji+1,jj ,1) )
	1568	p_tauj(ji,jj) = 0.5 * ( frcv(jpr_ity1)%z3(ji+1,jj+1,1) + frcv(jpr_ity1)%z3(ji ,jj+1,1) )
[1218]	1569	END DO
[9767]	1570	END DO
[1218]	1571	END SELECT
[9767]	1572	IF( srcv(jpr_itx1)%clgrid /= 'U' ) THEN
[10425]	1573	CALL lbc_lnk_multi( 'sbccpl', p_taui, 'U', -1., p_tauj, 'V', -1. )
[9767]	1574	ENDIF
	1575
[1218]	1576	ENDIF
[3294]	1577	!
[1218]	1578	END SUBROUTINE sbc_cpl_ice_tau
	1579
	1580
[9019]	1581	SUBROUTINE sbc_cpl_ice_flx( picefr, palbi, psst, pist, phs, phi )
[1218]	1582	!!----------------------------------------------------------------------
[3294]	1583	!! * ROUTINE sbc_cpl_ice_flx *
[1218]	1584	!!
[6722]	1585	!! ** Purpose : provide the heat and freshwater fluxes of the ocean-ice system
[1218]	1586	!!
	1587	!! ** Method : transform the fields received from the atmosphere into
	1588	!! surface heat and fresh water boundary condition for the
	1589	!! ice-ocean system. The following fields are provided:
[6722]	1590	!! * total non solar, solar and freshwater fluxes (qns_tot,
[1218]	1591	!! qsr_tot and emp_tot) (total means weighted ice-ocean flux)
	1592	!! NB: emp_tot include runoffs and calving.
[6722]	1593	!! * fluxes over ice (qns_ice, qsr_ice, emp_ice) where
[1218]	1594	!! emp_ice = sublimation - solid precipitation as liquid
	1595	!! precipitation are re-routed directly to the ocean and
[6722]	1596	!! calving directly enter the ocean (runoffs are read but included in trasbc.F90)
	1597	!! * solid precipitation (sprecip), used to add to qns_tot
[1218]	1598	!! the heat lost associated to melting solid precipitation
	1599	!! over the ocean fraction.
[6722]	1600	!! * heat content of rain, snow and evap can also be provided,
	1601	!! otherwise heat flux associated with these mass flux are
	1602	!! guessed (qemp_oce, qemp_ice)
[1218]	1603	!!
[6722]	1604	!! - the fluxes have been separated from the stress as
	1605	!! (a) they are updated at each ice time step compare to
	1606	!! an update at each coupled time step for the stress, and
	1607	!! (b) the conservative computation of the fluxes over the
	1608	!! sea-ice area requires the knowledge of the ice fraction
	1609	!! after the ice advection and before the ice thermodynamics,
	1610	!! so that the stress is updated before the ice dynamics
	1611	!! while the fluxes are updated after it.
[1218]	1612	!!
[6722]	1613	!! ** Details
[9019]	1614	!! qns_tot = (1-a) * qns_oce + a * qns_ice => provided
[6722]	1615	!! + qemp_oce + qemp_ice => recalculated and added up to qns
	1616	!!
[9019]	1617	!! qsr_tot = (1-a) * qsr_oce + a * qsr_ice => provided
[6722]	1618	!!
[7968]	1619	!! emp_tot = emp_oce + emp_ice => calving is provided and added to emp_tot (and emp_oce).
	1620	!! runoff (which includes rivers+icebergs) and iceshelf
	1621	!! are provided but not included in emp here. Only runoff will
	1622	!! be included in emp in other parts of NEMO code
[1218]	1623	!! ** Action : update at each nf_ice time step:
[3294]	1624	!! qns_tot, qsr_tot non-solar and solar total heat fluxes
	1625	!! qns_ice, qsr_ice non-solar and solar heat fluxes over the ice
[6722]	1626	!! emp_tot total evaporation - precipitation(liquid and solid) (-calving)
	1627	!! emp_ice ice sublimation - solid precipitation over the ice
	1628	!! dqns_ice d(non-solar heat flux)/d(Temperature) over the ice
	1629	!! sprecip solid precipitation over the ocean
[1218]	1630	!!----------------------------------------------------------------------
[12252]	1631	REAL(wp), INTENT(in) , DIMENSION(:,:) :: picefr ! ice fraction [0 to 1]
	1632	! !! ! optional arguments, used only in 'mixed oce-ice' case or for Met-Office coupling
	1633	REAL(wp), INTENT(in) , DIMENSION(:,:,:), OPTIONAL :: palbi ! all skies ice albedo
	1634	REAL(wp), INTENT(in) , DIMENSION(:,: ), OPTIONAL :: psst ! sea surface temperature [Celsius]
	1635	REAL(wp), INTENT(inout), DIMENSION(:,:,:), OPTIONAL :: pist ! ice surface temperature [Kelvin] => inout for Met-Office
	1636	REAL(wp), INTENT(in) , DIMENSION(:,:,:), OPTIONAL :: phs ! snow depth [m]
	1637	REAL(wp), INTENT(in) , DIMENSION(:,:,:), OPTIONAL :: phi ! ice thickness [m]
[3294]	1638	!
[9019]	1639	INTEGER :: ji, jj, jl ! dummy loop index
	1640	REAL(wp) :: ztri ! local scalar
	1641	REAL(wp), DIMENSION(jpi,jpj) :: zcptn, zcptrain, zcptsnw, ziceld, zmsk, zsnw
	1642	REAL(wp), DIMENSION(jpi,jpj) :: zemp_tot, zemp_ice, zemp_oce, ztprecip, zsprecip , zevap_oce, zdevap_ice
	1643	REAL(wp), DIMENSION(jpi,jpj) :: zqns_tot, zqns_oce, zqsr_tot, zqsr_oce, zqprec_ice, zqemp_oce, zqemp_ice
[12252]	1644	REAL(wp), DIMENSION(jpi,jpj,jpl) :: zqns_ice, zqsr_ice, zdqns_ice, zqevap_ice, zevap_ice, zqtr_ice_top, ztsu
[1218]	1645	!!----------------------------------------------------------------------
[3294]	1646	!
[5407]	1647	IF( ln_mixcpl ) zmsk(:,:) = 1. - xcplmask(:,:,0)
[9019]	1648	ziceld(:,:) = 1._wp - picefr(:,:)
	1649	zcptn (:,:) = rcp * sst_m(:,:)
[888]	1650	!
[1218]	1651	! ! ========================= !
[6722]	1652	! ! freshwater budget ! (emp_tot)
[1218]	1653	! ! ========================= !
[888]	1654	!
[6722]	1655	! ! solid Precipitation (sprecip)
	1656	! ! liquid + solid Precipitation (tprecip)
	1657	! ! total Evaporation - total Precipitation (emp_tot)
	1658	! ! sublimation - solid precipitation (cell average) (emp_ice)
[3294]	1659	SELECT CASE( TRIM( sn_rcv_emp%cldes ) )
[6722]	1660	CASE( 'conservative' ) ! received fields: jpr_rain, jpr_snow, jpr_ievp, jpr_tevp
	1661	zsprecip(:,:) = frcv(jpr_snow)%z3(:,:,1) ! May need to ensure positive here
	1662	ztprecip(:,:) = frcv(jpr_rain)%z3(:,:,1) + zsprecip(:,:) ! May need to ensure positive here
	1663	zemp_tot(:,:) = frcv(jpr_tevp)%z3(:,:,1) - ztprecip(:,:)
[9019]	1664	zemp_ice(:,:) = ( frcv(jpr_ievp)%z3(:,:,1) - frcv(jpr_snow)%z3(:,:,1) ) * picefr(:,:)
[7761]	1665	CASE( 'oce and ice' ) ! received fields: jpr_sbpr, jpr_semp, jpr_oemp, jpr_ievp
[9019]	1666	zemp_tot(:,:) = ziceld(:,:) * frcv(jpr_oemp)%z3(:,:,1) + picefr(:,:) * frcv(jpr_sbpr)%z3(:,:,1)
	1667	zemp_ice(:,:) = frcv(jpr_semp)%z3(:,:,1) * picefr(:,:)
[5407]	1668	zsprecip(:,:) = frcv(jpr_ievp)%z3(:,:,1) - frcv(jpr_semp)%z3(:,:,1)
	1669	ztprecip(:,:) = frcv(jpr_semp)%z3(:,:,1) - frcv(jpr_sbpr)%z3(:,:,1) + zsprecip(:,:)
[10404]	1670	CASE( 'none' ) ! Not available as for now: needs additional coding below when computing zevap_oce
	1671	! ! since fields received are not defined with none option
	1672	CALL ctl_stop( 'STOP', 'sbccpl/sbc_cpl_ice_flx: some fields are not defined. Change sn_rcv_emp value in namelist namsbc_cpl' )
[1218]	1673	END SELECT
[6722]	1674
[9570]	1675	#if defined key_si3
[9019]	1676	! zsnw = snow fraction over ice after wind blowing (=picefr if no blowing)
	1677	zsnw(:,:) = 0._wp ; CALL ice_thd_snwblow( ziceld, zsnw )
[6416]	1678
[6722]	1679	! --- evaporation minus precipitation corrected (because of wind blowing on snow) --- !
[9019]	1680	zemp_ice(:,:) = zemp_ice(:,:) + zsprecip(:,:) * ( picefr(:,:) - zsnw(:,:) ) ! emp_ice = A * sublimation - zsnw * sprecip
[6722]	1681	zemp_oce(:,:) = zemp_tot(:,:) - zemp_ice(:,:) ! emp_oce = emp_tot - emp_ice
[6711]	1682
[6722]	1683	! --- evaporation over ocean (used later for qemp) --- !
[9019]	1684	zevap_oce(:,:) = frcv(jpr_tevp)%z3(:,:,1) - frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:)
[6722]	1685
[6711]	1686	! --- evaporation over ice (kg/m2/s) --- !
[9019]	1687	DO jl=1,jpl
[12182]	1688	IF(sn_rcv_emp%clcat == 'yes') THEN ; zevap_ice(:,:,jl) = frcv(jpr_ievp)%z3(:,:,jl)
[9019]	1689	ELSE ; zevap_ice(:,:,jl) = frcv(jpr_ievp)%z3(:,:,1 ) ; ENDIF
	1690	ENDDO
	1691
[6416]	1692	! since the sensitivity of evap to temperature (devap/dT) is not prescribed by the atmosphere, we set it to 0
[7968]	1693	! therefore, sublimation is not redistributed over the ice categories when no subgrid scale fluxes are provided by atm.
[6416]	1694	zdevap_ice(:,:) = 0._wp
	1695
[7968]	1696	! --- Continental fluxes --- !
	1697	IF( srcv(jpr_rnf)%laction ) THEN ! runoffs (included in emp later on)
	1698	rnf(:,:) = frcv(jpr_rnf)%z3(:,:,1)
	1699	ENDIF
	1700	IF( srcv(jpr_cal)%laction ) THEN ! calving (put in emp_tot and emp_oce)
[5407]	1701	zemp_tot(:,:) = zemp_tot(:,:) - frcv(jpr_cal)%z3(:,:,1)
[6711]	1702	zemp_oce(:,:) = zemp_oce(:,:) - frcv(jpr_cal)%z3(:,:,1)
[1756]	1703	ENDIF
[7968]	1704	IF( srcv(jpr_icb)%laction ) THEN ! iceberg added to runoffs
[7788]	1705	fwficb(:,:) = frcv(jpr_icb)%z3(:,:,1)
[7968]	1706	rnf(:,:) = rnf(:,:) + fwficb(:,:)
[7788]	1707	ENDIF
[7968]	1708	IF( srcv(jpr_isf)%laction ) THEN ! iceshelf (fwfisf <0 mean melting)
[12150]	1709	fwfisf_oasis(:,:) = - frcv(jpr_isf)%z3(:,:,1)
[7788]	1710	ENDIF
	1711
[5407]	1712	IF( ln_mixcpl ) THEN
	1713	emp_tot(:,:) = emp_tot(:,:) * xcplmask(:,:,0) + zemp_tot(:,:) * zmsk(:,:)
	1714	emp_ice(:,:) = emp_ice(:,:) * xcplmask(:,:,0) + zemp_ice(:,:) * zmsk(:,:)
[6416]	1715	emp_oce(:,:) = emp_oce(:,:) * xcplmask(:,:,0) + zemp_oce(:,:) * zmsk(:,:)
[5407]	1716	sprecip(:,:) = sprecip(:,:) * xcplmask(:,:,0) + zsprecip(:,:) * zmsk(:,:)
	1717	tprecip(:,:) = tprecip(:,:) * xcplmask(:,:,0) + ztprecip(:,:) * zmsk(:,:)
[9019]	1718	DO jl = 1, jpl
	1719	evap_ice (:,:,jl) = evap_ice (:,:,jl) * xcplmask(:,:,0) + zevap_ice (:,:,jl) * zmsk(:,:)
	1720	devap_ice(:,:,jl) = devap_ice(:,:,jl) * xcplmask(:,:,0) + zdevap_ice(:,:) * zmsk(:,:)
	1721	END DO
[5407]	1722	ELSE
[9019]	1723	emp_tot (:,:) = zemp_tot (:,:)
	1724	emp_ice (:,:) = zemp_ice (:,:)
	1725	emp_oce (:,:) = zemp_oce (:,:)
	1726	sprecip (:,:) = zsprecip (:,:)
	1727	tprecip (:,:) = ztprecip (:,:)
	1728	evap_ice(:,:,:) = zevap_ice(:,:,:)
	1729	DO jl = 1, jpl
[6416]	1730	devap_ice(:,:,jl) = zdevap_ice(:,:)
[9019]	1731	END DO
[6416]	1732	ENDIF
[6722]	1733
[6416]	1734	#else
[9019]	1735	zsnw(:,:) = picefr(:,:)
[7968]	1736	! --- Continental fluxes --- !
	1737	IF( srcv(jpr_rnf)%laction ) THEN ! runoffs (included in emp later on)
	1738	rnf(:,:) = frcv(jpr_rnf)%z3(:,:,1)
	1739	ENDIF
	1740	IF( srcv(jpr_cal)%laction ) THEN ! calving (put in emp_tot)
[6416]	1741	zemp_tot(:,:) = zemp_tot(:,:) - frcv(jpr_cal)%z3(:,:,1)
	1742	ENDIF
[7968]	1743	IF( srcv(jpr_icb)%laction ) THEN ! iceberg added to runoffs
[7788]	1744	fwficb(:,:) = frcv(jpr_icb)%z3(:,:,1)
[7968]	1745	rnf(:,:) = rnf(:,:) + fwficb(:,:)
[7788]	1746	ENDIF
[7968]	1747	IF( srcv(jpr_isf)%laction ) THEN ! iceshelf (fwfisf <0 mean melting)
[12150]	1748	fwfisf_oasis(:,:) = - frcv(jpr_isf)%z3(:,:,1)
[7788]	1749	ENDIF
[9019]	1750	!
[6416]	1751	IF( ln_mixcpl ) THEN
	1752	emp_tot(:,:) = emp_tot(:,:) * xcplmask(:,:,0) + zemp_tot(:,:) * zmsk(:,:)
	1753	emp_ice(:,:) = emp_ice(:,:) * xcplmask(:,:,0) + zemp_ice(:,:) * zmsk(:,:)
	1754	sprecip(:,:) = sprecip(:,:) * xcplmask(:,:,0) + zsprecip(:,:) * zmsk(:,:)
	1755	tprecip(:,:) = tprecip(:,:) * xcplmask(:,:,0) + ztprecip(:,:) * zmsk(:,:)
	1756	ELSE
[5407]	1757	emp_tot(:,:) = zemp_tot(:,:)
	1758	emp_ice(:,:) = zemp_ice(:,:)
	1759	sprecip(:,:) = zsprecip(:,:)
	1760	tprecip(:,:) = ztprecip(:,:)
	1761	ENDIF
[9019]	1762	!
	1763	#endif
[5407]	1764
[7968]	1765	! outputs
	1766	!! IF( srcv(jpr_rnf)%laction ) CALL iom_put( 'runoffs' , rnf(:,:) * tmask(:,:,1) ) ! runoff
	1767	!! IF( srcv(jpr_isf)%laction ) CALL iom_put( 'iceshelf_cea', -fwfisf(:,:) * tmask(:,:,1) ) ! iceshelf
	1768	IF( srcv(jpr_cal)%laction ) CALL iom_put( 'calving_cea' , frcv(jpr_cal)%z3(:,:,1) * tmask(:,:,1) ) ! calving
	1769	IF( srcv(jpr_icb)%laction ) CALL iom_put( 'iceberg_cea' , frcv(jpr_icb)%z3(:,:,1) * tmask(:,:,1) ) ! icebergs
	1770	IF( iom_use('snowpre') ) CALL iom_put( 'snowpre' , sprecip(:,:) ) ! Snow
	1771	IF( iom_use('precip') ) CALL iom_put( 'precip' , tprecip(:,:) ) ! total precipitation
	1772	IF( iom_use('rain') ) CALL iom_put( 'rain' , tprecip(:,:) - sprecip(:,:) ) ! liquid precipitation
	1773	IF( iom_use('snow_ao_cea') ) CALL iom_put( 'snow_ao_cea' , sprecip(:,:) * ( 1._wp - zsnw(:,:) ) ) ! Snow over ice-free ocean (cell average)
	1774	IF( iom_use('snow_ai_cea') ) CALL iom_put( 'snow_ai_cea' , sprecip(:,:) * zsnw(:,:) ) ! Snow over sea-ice (cell average)
[12193]	1775	IF( iom_use('rain_ao_cea') ) CALL iom_put( 'rain_ao_cea' , ( tprecip(:,:) - sprecip(:,:) ) * picefr(:,:) ) ! liquid precipitation over ocean (cell average)
[9019]	1776	IF( iom_use('subl_ai_cea') ) CALL iom_put( 'subl_ai_cea' , frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:) * tmask(:,:,1) ) ! Sublimation over sea-ice (cell average)
[7968]	1777	IF( iom_use('evap_ao_cea') ) CALL iom_put( 'evap_ao_cea' , ( frcv(jpr_tevp)%z3(:,:,1) &
[9019]	1778	& - frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:) ) * tmask(:,:,1) ) ! ice-free oce evap (cell average)
[7968]	1779	! note: runoff output is done in sbcrnf (which includes icebergs too) and iceshelf output is done in sbcisf
	1780	!
[1218]	1781	! ! ========================= !
[3294]	1782	SELECT CASE( TRIM( sn_rcv_qns%cldes ) ) ! non solar heat fluxes ! (qns)
[1218]	1783	! ! ========================= !
[6722]	1784	CASE( 'oce only' ) ! the required field is directly provided
	1785	zqns_tot(:,:) = frcv(jpr_qnsoce)%z3(:,:,1)
	1786	CASE( 'conservative' ) ! the required fields are directly provided
	1787	zqns_tot(:,:) = frcv(jpr_qnsmix)%z3(:,:,1)
[12182]	1788	IF( TRIM(sn_rcv_qns%clcat) == 'yes' ) THEN
[5407]	1789	zqns_ice(:,:,1:jpl) = frcv(jpr_qnsice)%z3(:,:,1:jpl)
[3294]	1790	ELSE
[9019]	1791	DO jl = 1, jpl
[6722]	1792	zqns_ice(:,:,jl) = frcv(jpr_qnsice)%z3(:,:,1) ! Set all category values equal
[9019]	1793	END DO
[3294]	1794	ENDIF
[6722]	1795	CASE( 'oce and ice' ) ! the total flux is computed from ocean and ice fluxes
[9019]	1796	zqns_tot(:,:) = ziceld(:,:) * frcv(jpr_qnsoce)%z3(:,:,1)
[12182]	1797	IF( TRIM(sn_rcv_qns%clcat) == 'yes' ) THEN
[3294]	1798	DO jl=1,jpl
[5407]	1799	zqns_tot(:,: ) = zqns_tot(:,:) + a_i(:,:,jl) * frcv(jpr_qnsice)%z3(:,:,jl)
	1800	zqns_ice(:,:,jl) = frcv(jpr_qnsice)%z3(:,:,jl)
[3294]	1801	ENDDO
	1802	ELSE
[9019]	1803	qns_tot(:,:) = qns_tot(:,:) + picefr(:,:) * frcv(jpr_qnsice)%z3(:,:,1)
	1804	DO jl = 1, jpl
	1805	zqns_tot(:,: ) = zqns_tot(:,:) + picefr(:,:) * frcv(jpr_qnsice)%z3(:,:,1)
[5407]	1806	zqns_ice(:,:,jl) = frcv(jpr_qnsice)%z3(:,:,1)
[9019]	1807	END DO
[3294]	1808	ENDIF
[6722]	1809	CASE( 'mixed oce-ice' ) ! the ice flux is cumputed from the total flux, the SST and ice informations
[3294]	1810	! NEED TO SORT OUT HOW THIS SHOULD WORK IN THE MULTI-CATEGORY CASE - CURRENTLY NOT ALLOWED WHEN INTERFACE INITIALISED
[5407]	1811	zqns_tot(:,: ) = frcv(jpr_qnsmix)%z3(:,:,1)
[12252]	1812	IF ( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
	1813	DO jl = 1, jpl
	1814	zqns_ice(:,:,jl) = frcv(jpr_qnsmix)%z3(:,:,jl) &
	1815	& + frcv(jpr_dqnsdt)%z3(:,:,jl) * ( pist(:,:,jl) - ( ( rt0 + psst(:,:) ) * ziceld(:,:) &
	1816	& + pist(:,:,jl) * picefr(:,:) ) )
	1817	END DO
	1818	ELSE
	1819	DO jl = 1, jpl
	1820	zqns_ice(:,:,jl) = frcv(jpr_qnsmix)%z3(:,:, 1) &
	1821	& + frcv(jpr_dqnsdt)%z3(:,:, 1) * ( pist(:,:,jl) - ( ( rt0 + psst(:,:) ) * ziceld(:,:) &
	1822	& + pist(:,:,jl) * picefr(:,:) ) )
	1823	END DO
	1824	ENDIF
[1218]	1825	END SELECT
[1860]	1826	!
[7968]	1827	! --- calving (removed from qns_tot) --- !
[9935]	1828	IF( srcv(jpr_cal)%laction ) zqns_tot(:,:) = zqns_tot(:,:) - frcv(jpr_cal)%z3(:,:,1) * rLfus ! remove latent heat of calving
	1829	! we suppose it melts at 0deg, though it should be temp. of surrounding ocean
[7968]	1830	! --- iceberg (removed from qns_tot) --- !
[9935]	1831	IF( srcv(jpr_icb)%laction ) zqns_tot(:,:) = zqns_tot(:,:) - frcv(jpr_icb)%z3(:,:,1) * rLfus ! remove latent heat of iceberg melting
[1218]	1832
[9570]	1833	#if defined key_si3
[5407]	1834	! --- non solar flux over ocean --- !
[9019]	1835	! note: ziceld cannot be = 0 since we limit the ice concentration to amax
[5407]	1836	zqns_oce = 0._wp
[9019]	1837	WHERE( ziceld /= 0._wp ) zqns_oce(:,:) = ( zqns_tot(:,:) - SUM( a_i * zqns_ice, dim=3 ) ) / ziceld(:,:)
[5407]	1838
[7813]	1839	! Heat content per unit mass of snow (J/kg)
[9935]	1840	WHERE( SUM( a_i, dim=3 ) > 1.e-10 ) ; zcptsnw(:,:) = rcpi * SUM( (tn_ice - rt0) * a_i, dim=3 ) / SUM( a_i, dim=3 )
[7813]	1841	ELSEWHERE ; zcptsnw(:,:) = zcptn(:,:)
	1842	ENDWHERE
	1843	! Heat content per unit mass of rain (J/kg)
[9019]	1844	zcptrain(:,:) = rcp * ( SUM( (tn_ice(:,:,:) - rt0) * a_i(:,:,:), dim=3 ) + sst_m(:,:) * ziceld(:,:) )
[7813]	1845
[6722]	1846	! --- enthalpy of snow precip over ice in J/m3 (to be used in 1D-thermo) --- !
[9935]	1847	zqprec_ice(:,:) = rhos * ( zcptsnw(:,:) - rLfus )
[5407]	1848
[6416]	1849	! --- heat content of evap over ice in W/m2 (to be used in 1D-thermo) --- !
	1850	DO jl = 1, jpl
[9935]	1851	zqevap_ice(:,:,jl) = 0._wp ! should be -evap * ( ( Tice - rt0 ) * rcpi ) but atm. does not take it into account
[6416]	1852	END DO
[5407]	1853
[7813]	1854	! --- heat flux associated with emp (W/m2) --- !
	1855	zqemp_oce(:,:) = - zevap_oce(:,:) * zcptn (:,:) & ! evap
	1856	& + ( ztprecip(:,:) - zsprecip(:,:) ) * zcptrain(:,:) & ! liquid precip
[9935]	1857	& + zsprecip(:,:) * ( 1._wp - zsnw ) * ( zcptsnw (:,:) - rLfus ) ! solid precip over ocean + snow melting
	1858	zqemp_ice(:,:) = zsprecip(:,:) * zsnw * ( zcptsnw (:,:) - rLfus ) ! solid precip over ice (qevap_ice=0 since atm. does not take it into account)
[9019]	1859	!! zqemp_ice(:,:) = - frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:) * zcptsnw (:,:) & ! ice evap
[9935]	1860	!! & + zsprecip(:,:) * zsnw * zqprec_ice(:,:) * r1_rhos ! solid precip over ice
[7813]	1861
[6416]	1862	! --- total non solar flux (including evap/precip) --- !
	1863	zqns_tot(:,:) = zqns_tot(:,:) + zqemp_ice(:,:) + zqemp_oce(:,:)
	1864
[5407]	1865	! --- in case both coupled/forced are active, we must mix values --- !
	1866	IF( ln_mixcpl ) THEN
	1867	qns_tot(:,:) = qns_tot(:,:) * xcplmask(:,:,0) + zqns_tot(:,:)* zmsk(:,:)
	1868	qns_oce(:,:) = qns_oce(:,:) * xcplmask(:,:,0) + zqns_oce(:,:)* zmsk(:,:)
	1869	DO jl=1,jpl
[6416]	1870	qns_ice (:,:,jl) = qns_ice (:,:,jl) * xcplmask(:,:,0) + zqns_ice (:,:,jl)* zmsk(:,:)
	1871	qevap_ice(:,:,jl) = qevap_ice(:,:,jl) * xcplmask(:,:,0) + zqevap_ice(:,:,jl)* zmsk(:,:)
[5407]	1872	ENDDO
	1873	qprec_ice(:,:) = qprec_ice(:,:) * xcplmask(:,:,0) + zqprec_ice(:,:)* zmsk(:,:)
	1874	qemp_oce (:,:) = qemp_oce(:,:) * xcplmask(:,:,0) + zqemp_oce(:,:)* zmsk(:,:)
[6416]	1875	qemp_ice (:,:) = qemp_ice(:,:) * xcplmask(:,:,0) + zqemp_ice(:,:)* zmsk(:,:)
[5407]	1876	ELSE
	1877	qns_tot (:,: ) = zqns_tot (:,: )
	1878	qns_oce (:,: ) = zqns_oce (:,: )
	1879	qns_ice (:,:,:) = zqns_ice (:,:,:)
[6416]	1880	qevap_ice(:,:,:) = zqevap_ice(:,:,:)
	1881	qprec_ice(:,: ) = zqprec_ice(:,: )
	1882	qemp_oce (:,: ) = zqemp_oce (:,: )
	1883	qemp_ice (:,: ) = zqemp_ice (:,: )
[5407]	1884	ENDIF
[6722]	1885
[5407]	1886	#else
[7968]	1887	zcptsnw (:,:) = zcptn(:,:)
	1888	zcptrain(:,:) = zcptn(:,:)
	1889
[6722]	1890	! clem: this formulation is certainly wrong... but better than it was...
[9935]	1891	zqns_tot(:,:) = zqns_tot(:,:) & ! zqns_tot update over free ocean with:
	1892	& - ( ziceld(:,:) * zsprecip(:,:) * rLfus ) & ! remove the latent heat flux of solid precip. melting
	1893	& - ( zemp_tot(:,:) & ! remove the heat content of mass flux (assumed to be at SST)
[6722]	1894	& - zemp_ice(:,:) ) * zcptn(:,:)
[5407]	1895
	1896	IF( ln_mixcpl ) THEN
[9019]	1897	qns_tot(:,:) = qns(:,:) * ziceld(:,:) + SUM( qns_ice(:,:,:) * a_i(:,:,:), dim=3 ) ! total flux from blk
[5407]	1898	qns_tot(:,:) = qns_tot(:,:) * xcplmask(:,:,0) + zqns_tot(:,:)* zmsk(:,:)
	1899	DO jl=1,jpl
	1900	qns_ice(:,:,jl) = qns_ice(:,:,jl) * xcplmask(:,:,0) + zqns_ice(:,:,jl)* zmsk(:,:)
	1901	ENDDO
	1902	ELSE
	1903	qns_tot(:,: ) = zqns_tot(:,: )
	1904	qns_ice(:,:,:) = zqns_ice(:,:,:)
	1905	ENDIF
[7968]	1906
[5407]	1907	#endif
[7968]	1908	! outputs
[12182]	1909	IF( srcv(jpr_cal)%laction ) CALL iom_put('hflx_cal_cea' , - frcv(jpr_cal)%z3(:,:,1) * rLfus ) ! latent heat from calving
	1910	IF( srcv(jpr_icb)%laction ) CALL iom_put('hflx_icb_cea' , - frcv(jpr_icb)%z3(:,:,1) * rLfus ) ! latent heat from icebergs melting
	1911	IF( iom_use('hflx_rain_cea') ) CALL iom_put('hflx_rain_cea' , ( tprecip(:,:) - sprecip(:,:) ) * zcptrain(:,:) ) ! heat flux from rain (cell average)
	1912	IF( iom_use('hflx_evap_cea') ) CALL iom_put('hflx_evap_cea' , ( frcv(jpr_tevp)%z3(:,:,1) - frcv(jpr_ievp)%z3(:,:,1) &
[9119]	1913	& * picefr(:,:) ) * zcptn(:,:) * tmask(:,:,1) ) ! heat flux from evap (cell average)
[12193]	1914	IF( iom_use('hflx_prec_cea') ) CALL iom_put('hflx_prec_cea' , sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) + & ! heat flux from all precip (cell avg)
	1915	& ( tprecip(:,:) - sprecip(:,:) ) * zcptrain(:,:) )
[12182]	1916	IF( iom_use('hflx_snow_cea') ) CALL iom_put('hflx_snow_cea' , sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) ) ! heat flux from snow (cell average)
	1917	IF( iom_use('hflx_snow_ao_cea') ) CALL iom_put('hflx_snow_ao_cea', sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) &
[9119]	1918	& * ( 1._wp - zsnw(:,:) ) ) ! heat flux from snow (over ocean)
[12182]	1919	IF( iom_use('hflx_snow_ai_cea') ) CALL iom_put('hflx_snow_ai_cea', sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) &
[9119]	1920	& * zsnw(:,:) ) ! heat flux from snow (over ice)
[7968]	1921	! note: hflx for runoff and iceshelf are done in sbcrnf and sbcisf resp.
	1922	!
[1218]	1923	! ! ========================= !
[3294]	1924	SELECT CASE( TRIM( sn_rcv_qsr%cldes ) ) ! solar heat fluxes ! (qsr)
[1218]	1925	! ! ========================= !
[3294]	1926	CASE( 'oce only' )
[5407]	1927	zqsr_tot(:,: ) = MAX( 0._wp , frcv(jpr_qsroce)%z3(:,:,1) )
[1218]	1928	CASE( 'conservative' )
[5407]	1929	zqsr_tot(:,: ) = frcv(jpr_qsrmix)%z3(:,:,1)
[12182]	1930	IF( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
[5407]	1931	zqsr_ice(:,:,1:jpl) = frcv(jpr_qsrice)%z3(:,:,1:jpl)
[3294]	1932	ELSE
	1933	! Set all category values equal for the moment
[9019]	1934	DO jl = 1, jpl
[5407]	1935	zqsr_ice(:,:,jl) = frcv(jpr_qsrice)%z3(:,:,1)
[9019]	1936	END DO
[3294]	1937	ENDIF
[1218]	1938	CASE( 'oce and ice' )
[9019]	1939	zqsr_tot(:,: ) = ziceld(:,:) * frcv(jpr_qsroce)%z3(:,:,1)
[12182]	1940	IF( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
[9019]	1941	DO jl = 1, jpl
[5407]	1942	zqsr_tot(:,: ) = zqsr_tot(:,:) + a_i(:,:,jl) * frcv(jpr_qsrice)%z3(:,:,jl)
	1943	zqsr_ice(:,:,jl) = frcv(jpr_qsrice)%z3(:,:,jl)
[9019]	1944	END DO
[3294]	1945	ELSE
[9019]	1946	qsr_tot(:,: ) = qsr_tot(:,:) + picefr(:,:) * frcv(jpr_qsrice)%z3(:,:,1)
	1947	DO jl = 1, jpl
	1948	zqsr_tot(:,: ) = zqsr_tot(:,:) + picefr(:,:) * frcv(jpr_qsrice)%z3(:,:,1)
[5407]	1949	zqsr_ice(:,:,jl) = frcv(jpr_qsrice)%z3(:,:,1)
[9019]	1950	END DO
[3294]	1951	ENDIF
[1218]	1952	CASE( 'mixed oce-ice' )
[5407]	1953	zqsr_tot(:,: ) = frcv(jpr_qsrmix)%z3(:,:,1)
[3294]	1954	! NEED TO SORT OUT HOW THIS SHOULD WORK IN THE MULTI-CATEGORY CASE - CURRENTLY NOT ALLOWED WHEN INTERFACE INITIALISED
[1232]	1955	! Create solar heat flux over ice using incoming solar heat flux and albedos
	1956	! ( see OASIS3 user guide, 5th edition, p39 )
[12252]	1957	IF ( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
	1958	DO jl = 1, jpl
	1959	zqsr_ice(:,:,jl) = frcv(jpr_qsrmix)%z3(:,:,jl) * ( 1.- palbi(:,:,jl) ) &
	1960	& / ( 1.- ( alb_oce_mix(:,: ) * ziceld(:,:) &
	1961	& + palbi (:,:,jl) * picefr(:,:) ) )
	1962	END DO
	1963	ELSE
	1964	DO jl = 1, jpl
	1965	zqsr_ice(:,:,jl) = frcv(jpr_qsrmix)%z3(:,:, 1) * ( 1.- palbi(:,:,jl) ) &
	1966	& / ( 1.- ( alb_oce_mix(:,: ) * ziceld(:,:) &
	1967	& + palbi (:,:,jl) * picefr(:,:) ) )
	1968	END DO
	1969	ENDIF
[10404]	1970	CASE( 'none' ) ! Not available as for now: needs additional coding
	1971	! ! since fields received, here zqsr_tot, are not defined with none option
	1972	CALL ctl_stop( 'STOP', 'sbccpl/sbc_cpl_ice_flx: some fields are not defined. Change sn_rcv_qsr value in namelist namsbc_cpl' )
[1218]	1973	END SELECT
[5407]	1974	IF( ln_dm2dc .AND. ln_cpl ) THEN ! modify qsr to include the diurnal cycle
	1975	zqsr_tot(:,: ) = sbc_dcy( zqsr_tot(:,: ) )
[9019]	1976	DO jl = 1, jpl
[5407]	1977	zqsr_ice(:,:,jl) = sbc_dcy( zqsr_ice(:,:,jl) )
[9019]	1978	END DO
[2528]	1979	ENDIF
[1218]	1980
[9570]	1981	#if defined key_si3
[5486]	1982	! --- solar flux over ocean --- !
[9019]	1983	! note: ziceld cannot be = 0 since we limit the ice concentration to amax
[5486]	1984	zqsr_oce = 0._wp
[9019]	1985	WHERE( ziceld /= 0._wp ) zqsr_oce(:,:) = ( zqsr_tot(:,:) - SUM( a_i * zqsr_ice, dim=3 ) ) / ziceld(:,:)
[5486]	1986
	1987	IF( ln_mixcpl ) THEN ; qsr_oce(:,:) = qsr_oce(:,:) * xcplmask(:,:,0) + zqsr_oce(:,:)* zmsk(:,:)
	1988	ELSE ; qsr_oce(:,:) = zqsr_oce(:,:) ; ENDIF
	1989	#endif
	1990
[5407]	1991	IF( ln_mixcpl ) THEN
[9019]	1992	qsr_tot(:,:) = qsr(:,:) * ziceld(:,:) + SUM( qsr_ice(:,:,:) * a_i(:,:,:), dim=3 ) ! total flux from blk
[5407]	1993	qsr_tot(:,:) = qsr_tot(:,:) * xcplmask(:,:,0) + zqsr_tot(:,:)* zmsk(:,:)
[9019]	1994	DO jl = 1, jpl
[5407]	1995	qsr_ice(:,:,jl) = qsr_ice(:,:,jl) * xcplmask(:,:,0) + zqsr_ice(:,:,jl)* zmsk(:,:)
[9019]	1996	END DO
[5407]	1997	ELSE
	1998	qsr_tot(:,: ) = zqsr_tot(:,: )
	1999	qsr_ice(:,:,:) = zqsr_ice(:,:,:)
	2000	ENDIF
	2001
[4990]	2002	! ! ========================= !
	2003	SELECT CASE( TRIM( sn_rcv_dqnsdt%cldes ) ) ! d(qns)/dt !
	2004	! ! ========================= !
[1226]	2005	CASE ('coupled')
[12182]	2006	IF( TRIM(sn_rcv_dqnsdt%clcat) == 'yes' ) THEN
[5407]	2007	zdqns_ice(:,:,1:jpl) = frcv(jpr_dqnsdt)%z3(:,:,1:jpl)
[3294]	2008	ELSE
	2009	! Set all category values equal for the moment
	2010	DO jl=1,jpl
[5407]	2011	zdqns_ice(:,:,jl) = frcv(jpr_dqnsdt)%z3(:,:,1)
[3294]	2012	ENDDO
	2013	ENDIF
[1226]	2014	END SELECT
[5407]	2015
	2016	IF( ln_mixcpl ) THEN
	2017	DO jl=1,jpl
	2018	dqns_ice(:,:,jl) = dqns_ice(:,:,jl) * xcplmask(:,:,0) + zdqns_ice(:,:,jl) * zmsk(:,:)
	2019	ENDDO
	2020	ELSE
	2021	dqns_ice(:,:,:) = zdqns_ice(:,:,:)
	2022	ENDIF
[9019]	2023
[9570]	2024	#if defined key_si3
[4990]	2025	! ! ========================= !
[9019]	2026	SELECT CASE( TRIM( sn_rcv_iceflx%cldes ) ) ! ice topmelt and botmelt !
[4990]	2027	! ! ========================= !
[3294]	2028	CASE ('coupled')
[12252]	2029	IF( ln_mixcpl ) THEN
	2030	DO jl=1,jpl
	2031	qml_ice(:,:,jl) = qml_ice(:,:,jl) * xcplmask(:,:,0) + frcv(jpr_topm)%z3(:,:,jl) * zmsk(:,:)
	2032	qcn_ice(:,:,jl) = qcn_ice(:,:,jl) * xcplmask(:,:,0) + frcv(jpr_botm)%z3(:,:,jl) * zmsk(:,:)
	2033	ENDDO
	2034	ELSE
	2035	qml_ice(:,:,:) = frcv(jpr_topm)%z3(:,:,:)
	2036	qcn_ice(:,:,:) = frcv(jpr_botm)%z3(:,:,:)
	2037	ENDIF
[3294]	2038	END SELECT
[9019]	2039	! ! ========================= !
	2040	! ! Transmitted Qsr ! [W/m2]
	2041	! ! ========================= !
[10534]	2042	IF( .NOT.ln_cndflx ) THEN !== No conduction flux as surface forcing ==!
[9019]	2043	!
	2044	! ! ===> used prescribed cloud fraction representative for polar oceans in summer (0.81)
[12252]	2045	ztri = 0.18 * ( 1.0 - cldf_ice ) + 0.35 * cldf_ice ! surface transmission when hi>10cm (Grenfell Maykut 77)
[9019]	2046	!
[12252]	2047	WHERE ( phs(:,:,:) <= 0._wp .AND. phi(:,:,:) < 0.1_wp ) ! linear decrease from hi=0 to 10cm
	2048	zqtr_ice_top(:,:,:) = qsr_ice(:,:,:) * ( ztri + ( 1._wp - ztri ) * ( 1._wp - phi(:,:,:) * 10._wp ) )
	2049	ELSEWHERE( phs(:,:,:) <= 0._wp .AND. phi(:,:,:) >= 0.1_wp ) ! constant (ztri) when hi>10cm
	2050	zqtr_ice_top(:,:,:) = qsr_ice(:,:,:) * ztri
	2051	ELSEWHERE ! zero when hs>0
	2052	zqtr_ice_top(:,:,:) = 0._wp
	2053	END WHERE
[9019]	2054	!
[10534]	2055	ELSEIF( ln_cndflx .AND. .NOT.ln_cndemulate ) THEN !== conduction flux as surface forcing ==!
[9019]	2056	!
[9910]	2057	! ! ===> here we must receive the qtr_ice_top array from the coupler
[9019]	2058	! for now just assume zero (fully opaque ice)
[12252]	2059	zqtr_ice_top(:,:,:) = 0._wp
[9019]	2060	!
[10534]	2061	ENDIF
[9019]	2062	!
[12252]	2063	IF( ln_mixcpl ) THEN
	2064	DO jl=1,jpl
	2065	qtr_ice_top(:,:,jl) = qtr_ice_top(:,:,jl) * xcplmask(:,:,0) + zqtr_ice_top(:,:,jl) * zmsk(:,:)
	2066	ENDDO
	2067	ELSE
	2068	qtr_ice_top(:,:,:) = zqtr_ice_top(:,:,:)
	2069	ENDIF
	2070	! ! ================== !
	2071	! ! ice skin temp. !
	2072	! ! ================== !
	2073	! needed by Met Office
	2074	IF( srcv(jpr_ts_ice)%laction ) THEN
	2075	WHERE ( frcv(jpr_ts_ice)%z3(:,:,:) > 0.0 ) ; ztsu(:,:,:) = 0. + rt0
	2076	ELSEWHERE( frcv(jpr_ts_ice)%z3(:,:,:) < -60. ) ; ztsu(:,:,:) = -60. + rt0
	2077	ELSEWHERE ; ztsu(:,:,:) = frcv(jpr_ts_ice)%z3(:,:,:) + rt0
	2078	END WHERE
	2079	!
	2080	IF( ln_mixcpl ) THEN
	2081	DO jl=1,jpl
	2082	pist(:,:,jl) = pist(:,:,jl) * xcplmask(:,:,0) + ztsu(:,:,jl) * zmsk(:,:)
	2083	ENDDO
	2084	ELSE
	2085	pist(:,:,:) = ztsu(:,:,:)
	2086	ENDIF
	2087	!
	2088	ENDIF
	2089	!
[9019]	2090	#endif
[3294]	2091	!
[1226]	2092	END SUBROUTINE sbc_cpl_ice_flx
[1218]	2093
	2094
[11949]	2095	SUBROUTINE sbc_cpl_snd( kt, Kbb, Kmm )
[1218]	2096	!!----------------------------------------------------------------------
	2097	!! * ROUTINE sbc_cpl_snd *
	2098	!!
	2099	!! ** Purpose : provide the ocean-ice informations to the atmosphere
	2100	!!
[4990]	2101	!! ** Method : send to the atmosphere through a call to cpl_snd
[1218]	2102	!! all the needed fields (as defined in sbc_cpl_init)
	2103	!!----------------------------------------------------------------------
	2104	INTEGER, INTENT(in) :: kt
[11949]	2105	INTEGER, INTENT(in) :: Kbb, Kmm ! ocean model time level index
[2715]	2106	!
[3294]	2107	INTEGER :: ji, jj, jl ! dummy loop indices
[2715]	2108	INTEGER :: isec, info ! local integer
[5407]	2109	REAL(wp) :: zumax, zvmax
[9019]	2110	REAL(wp), DIMENSION(jpi,jpj) :: zfr_l, ztmp1, ztmp2, zotx1, zoty1, zotz1, zitx1, zity1, zitz1
	2111	REAL(wp), DIMENSION(jpi,jpj,jpl) :: ztmp3, ztmp4
[1218]	2112	!!----------------------------------------------------------------------
[3294]	2113	!
[6140]	2114	isec = ( kt - nit000 ) * NINT( rdt ) ! date of exchanges
[888]	2115
[1218]	2116	zfr_l(:,:) = 1.- fr_i(:,:)
	2117	! ! ------------------------- !
	2118	! ! Surface temperature ! in Kelvin
	2119	! ! ------------------------- !
[3680]	2120	IF( ssnd(jps_toce)%laction .OR. ssnd(jps_tice)%laction .OR. ssnd(jps_tmix)%laction ) THEN
[5407]	2121
[12182]	2122	IF( nn_components == jp_iam_opa ) THEN
[11949]	2123	ztmp1(:,:) = ts(:,:,1,jp_tem,Kmm) ! send temperature as it is (potential or conservative) -> use of l_useCT on the received part
[5407]	2124	ELSE
	2125	! we must send the surface potential temperature
[11949]	2126	IF( l_useCT ) THEN ; ztmp1(:,:) = eos_pt_from_ct( ts(:,:,1,jp_tem,Kmm), ts(:,:,1,jp_sal,Kmm) )
	2127	ELSE ; ztmp1(:,:) = ts(:,:,1,jp_tem,Kmm)
[5407]	2128	ENDIF
	2129	!
	2130	SELECT CASE( sn_snd_temp%cldes)
	2131	CASE( 'oce only' ) ; ztmp1(:,:) = ztmp1(:,:) + rt0
[5410]	2132	CASE( 'oce and ice' ) ; ztmp1(:,:) = ztmp1(:,:) + rt0
	2133	SELECT CASE( sn_snd_temp%clcat )
	2134	CASE( 'yes' )
	2135	ztmp3(:,:,1:jpl) = tn_ice(:,:,1:jpl)
	2136	CASE( 'no' )
	2137	WHERE( SUM( a_i, dim=3 ) /= 0. )
	2138	ztmp3(:,:,1) = SUM( tn_ice * a_i, dim=3 ) / SUM( a_i, dim=3 )
	2139	ELSEWHERE
[6121]	2140	ztmp3(:,:,1) = rt0
[5410]	2141	END WHERE
	2142	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%clcat' )
	2143	END SELECT
[5407]	2144	CASE( 'weighted oce and ice' ) ; ztmp1(:,:) = ( ztmp1(:,:) + rt0 ) * zfr_l(:,:)
	2145	SELECT CASE( sn_snd_temp%clcat )
	2146	CASE( 'yes' )
	2147	ztmp3(:,:,1:jpl) = tn_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2148	CASE( 'no' )
	2149	ztmp3(:,:,:) = 0.0
	2150	DO jl=1,jpl
	2151	ztmp3(:,:,1) = ztmp3(:,:,1) + tn_ice(:,:,jl) * a_i(:,:,jl)
	2152	ENDDO
	2153	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%clcat' )
	2154	END SELECT
[11949]	2155	CASE( 'oce and weighted ice') ; ztmp1(:,:) = ts(:,:,1,jp_tem,Kmm) + rt0
[9019]	2156	SELECT CASE( sn_snd_temp%clcat )
	2157	CASE( 'yes' )
	2158	ztmp3(:,:,1:jpl) = tn_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2159	CASE( 'no' )
	2160	ztmp3(:,:,:) = 0.0
	2161	DO jl=1,jpl
	2162	ztmp3(:,:,1) = ztmp3(:,:,1) + tn_ice(:,:,jl) * a_i(:,:,jl)
	2163	ENDDO
	2164	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%clcat' )
	2165	END SELECT
[5407]	2166	CASE( 'mixed oce-ice' )
	2167	ztmp1(:,:) = ( ztmp1(:,:) + rt0 ) * zfr_l(:,:)
[3680]	2168	DO jl=1,jpl
[5407]	2169	ztmp1(:,:) = ztmp1(:,:) + tn_ice(:,:,jl) * a_i(:,:,jl)
[3680]	2170	ENDDO
[5407]	2171	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%cldes' )
[3680]	2172	END SELECT
[5407]	2173	ENDIF
[4990]	2174	IF( ssnd(jps_toce)%laction ) CALL cpl_snd( jps_toce, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
	2175	IF( ssnd(jps_tice)%laction ) CALL cpl_snd( jps_tice, isec, ztmp3, info )
	2176	IF( ssnd(jps_tmix)%laction ) CALL cpl_snd( jps_tmix, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
[3680]	2177	ENDIF
[9019]	2178	!
[1218]	2179	! ! ------------------------- !
[9019]	2180	! ! 1st layer ice/snow temp. !
	2181	! ! ------------------------- !
[9570]	2182	#if defined key_si3
[9019]	2183	! needed by Met Office
	2184	IF( ssnd(jps_ttilyr)%laction) THEN
	2185	SELECT CASE( sn_snd_ttilyr%cldes)
	2186	CASE ('weighted ice')
	2187	ztmp3(:,:,1:jpl) = t1_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2188	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_ttilyr%cldes' )
	2189	END SELECT
	2190	IF( ssnd(jps_ttilyr)%laction ) CALL cpl_snd( jps_ttilyr, isec, ztmp3, info )
	2191	ENDIF
	2192	#endif
	2193	! ! ------------------------- !
[1218]	2194	! ! Albedo !
	2195	! ! ------------------------- !
	2196	IF( ssnd(jps_albice)%laction ) THEN ! ice
[6121]	2197	SELECT CASE( sn_snd_alb%cldes )
	2198	CASE( 'ice' )
	2199	SELECT CASE( sn_snd_alb%clcat )
	2200	CASE( 'yes' )
	2201	ztmp3(:,:,1:jpl) = alb_ice(:,:,1:jpl)
	2202	CASE( 'no' )
	2203	WHERE( SUM( a_i, dim=3 ) /= 0. )
	2204	ztmp1(:,:) = SUM( alb_ice (:,:,1:jpl) * a_i(:,:,1:jpl), dim=3 ) / SUM( a_i(:,:,1:jpl), dim=3 )
	2205	ELSEWHERE
[9019]	2206	ztmp1(:,:) = alb_oce_mix(:,:)
[6121]	2207	END WHERE
	2208	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_alb%clcat' )
	2209	END SELECT
	2210	CASE( 'weighted ice' ) ;
	2211	SELECT CASE( sn_snd_alb%clcat )
	2212	CASE( 'yes' )
	2213	ztmp3(:,:,1:jpl) = alb_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2214	CASE( 'no' )
	2215	WHERE( fr_i (:,:) > 0. )
	2216	ztmp1(:,:) = SUM ( alb_ice(:,:,1:jpl) * a_i(:,:,1:jpl), dim=3 )
	2217	ELSEWHERE
	2218	ztmp1(:,:) = 0.
	2219	END WHERE
	2220	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_ice%clcat' )
	2221	END SELECT
	2222	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_alb%cldes' )
[5410]	2223	END SELECT
[6121]	2224
	2225	SELECT CASE( sn_snd_alb%clcat )
	2226	CASE( 'yes' )
	2227	CALL cpl_snd( jps_albice, isec, ztmp3, info ) !-> MV this has never been checked in coupled mode
	2228	CASE( 'no' )
	2229	CALL cpl_snd( jps_albice, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
	2230	END SELECT
[888]	2231	ENDIF
[6121]	2232
[1218]	2233	IF( ssnd(jps_albmix)%laction ) THEN ! mixed ice-ocean
[9019]	2234	ztmp1(:,:) = alb_oce_mix(:,:) * zfr_l(:,:)
	2235	DO jl = 1, jpl
[3294]	2236	ztmp1(:,:) = ztmp1(:,:) + alb_ice(:,:,jl) * a_i(:,:,jl)
[9019]	2237	END DO
[4990]	2238	CALL cpl_snd( jps_albmix, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
[1218]	2239	ENDIF
	2240	! ! ------------------------- !
	2241	! ! Ice fraction & Thickness !
	2242	! ! ------------------------- !
[5407]	2243	! Send ice fraction field to atmosphere
[3680]	2244	IF( ssnd(jps_fice)%laction ) THEN
	2245	SELECT CASE( sn_snd_thick%clcat )
	2246	CASE( 'yes' ) ; ztmp3(:,:,1:jpl) = a_i(:,:,1:jpl)
	2247	CASE( 'no' ) ; ztmp3(:,:,1 ) = fr_i(:,: )
	2248	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%clcat' )
	2249	END SELECT
[12252]	2250	CALL cpl_snd( jps_fice, isec, ztmp3, info )
[3680]	2251	ENDIF
[9019]	2252
	2253	IF( ssnd(jps_fice1)%laction ) THEN
	2254	SELECT CASE( sn_snd_thick1%clcat )
	2255	CASE( 'yes' ) ; ztmp3(:,:,1:jpl) = a_i(:,:,1:jpl)
	2256	CASE( 'no' ) ; ztmp3(:,:,1 ) = fr_i(:,: )
	2257	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick1%clcat' )
	2258	END SELECT
	2259	CALL cpl_snd( jps_fice1, isec, ztmp3, info )
	2260	ENDIF
[5407]	2261
	2262	! Send ice fraction field to OPA (sent by SAS in SAS-OPA coupling)
	2263	IF( ssnd(jps_fice2)%laction ) THEN
	2264	ztmp3(:,:,1) = fr_i(:,:)
	2265	IF( ssnd(jps_fice2)%laction ) CALL cpl_snd( jps_fice2, isec, ztmp3, info )
	2266	ENDIF
[3294]	2267
	2268	! Send ice and snow thickness field
[3680]	2269	IF( ssnd(jps_hice)%laction .OR. ssnd(jps_hsnw)%laction ) THEN
	2270	SELECT CASE( sn_snd_thick%cldes)
	2271	CASE( 'none' ) ! nothing to do
	2272	CASE( 'weighted ice and snow' )
	2273	SELECT CASE( sn_snd_thick%clcat )
	2274	CASE( 'yes' )
[9019]	2275	ztmp3(:,:,1:jpl) = h_i(:,:,1:jpl) * a_i(:,:,1:jpl)
	2276	ztmp4(:,:,1:jpl) = h_s(:,:,1:jpl) * a_i(:,:,1:jpl)
[3680]	2277	CASE( 'no' )
	2278	ztmp3(:,:,:) = 0.0 ; ztmp4(:,:,:) = 0.0
	2279	DO jl=1,jpl
[9019]	2280	ztmp3(:,:,1) = ztmp3(:,:,1) + h_i(:,:,jl) * a_i(:,:,jl)
	2281	ztmp4(:,:,1) = ztmp4(:,:,1) + h_s(:,:,jl) * a_i(:,:,jl)
[3680]	2282	ENDDO
	2283	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%clcat' )
	2284	END SELECT
	2285	CASE( 'ice and snow' )
[5410]	2286	SELECT CASE( sn_snd_thick%clcat )
	2287	CASE( 'yes' )
[9019]	2288	ztmp3(:,:,1:jpl) = h_i(:,:,1:jpl)
	2289	ztmp4(:,:,1:jpl) = h_s(:,:,1:jpl)
[5410]	2290	CASE( 'no' )
	2291	WHERE( SUM( a_i, dim=3 ) /= 0. )
[9019]	2292	ztmp3(:,:,1) = SUM( h_i * a_i, dim=3 ) / SUM( a_i, dim=3 )
	2293	ztmp4(:,:,1) = SUM( h_s * a_i, dim=3 ) / SUM( a_i, dim=3 )
[5410]	2294	ELSEWHERE
	2295	ztmp3(:,:,1) = 0.
	2296	ztmp4(:,:,1) = 0.
	2297	END WHERE
	2298	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%clcat' )
	2299	END SELECT
[3680]	2300	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%cldes' )
[3294]	2301	END SELECT
[4990]	2302	IF( ssnd(jps_hice)%laction ) CALL cpl_snd( jps_hice, isec, ztmp3, info )
	2303	IF( ssnd(jps_hsnw)%laction ) CALL cpl_snd( jps_hsnw, isec, ztmp4, info )
[3680]	2304	ENDIF
[9019]	2305
[9570]	2306	#if defined key_si3
[1218]	2307	! ! ------------------------- !
[9019]	2308	! ! Ice melt ponds !
	2309	! ! ------------------------- !
[12252]	2310	! needed by Met Office: 1) fraction of ponded ice 2) local/actual pond depth
[9019]	2311	IF( ssnd(jps_a_p)%laction .OR. ssnd(jps_ht_p)%laction ) THEN
	2312	SELECT CASE( sn_snd_mpnd%cldes)
	2313	CASE( 'ice only' )
	2314	SELECT CASE( sn_snd_mpnd%clcat )
	2315	CASE( 'yes' )
[12252]	2316	ztmp3(:,:,1:jpl) = a_ip_frac(:,:,1:jpl)
	2317	ztmp4(:,:,1:jpl) = h_ip(:,:,1:jpl)
[9019]	2318	CASE( 'no' )
	2319	ztmp3(:,:,:) = 0.0
	2320	ztmp4(:,:,:) = 0.0
	2321	DO jl=1,jpl
[12252]	2322	ztmp3(:,:,1) = ztmp3(:,:,1) + a_ip_frac(:,:,jpl)
	2323	ztmp4(:,:,1) = ztmp4(:,:,1) + h_ip(:,:,jpl)
[9019]	2324	ENDDO
	2325	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_mpnd%clcat' )
	2326	END SELECT
	2327	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_mpnd%cldes' )
	2328	END SELECT
	2329	IF( ssnd(jps_a_p)%laction ) CALL cpl_snd( jps_a_p , isec, ztmp3, info )
	2330	IF( ssnd(jps_ht_p)%laction ) CALL cpl_snd( jps_ht_p, isec, ztmp4, info )
	2331	ENDIF
	2332	!
	2333	! ! ------------------------- !
	2334	! ! Ice conductivity !
	2335	! ! ------------------------- !
	2336	! needed by Met Office
	2337	IF( ssnd(jps_kice)%laction ) THEN
	2338	SELECT CASE( sn_snd_cond%cldes)
	2339	CASE( 'weighted ice' )
	2340	SELECT CASE( sn_snd_cond%clcat )
	2341	CASE( 'yes' )
	2342	ztmp3(:,:,1:jpl) = cnd_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2343	CASE( 'no' )
	2344	ztmp3(:,:,:) = 0.0
	2345	DO jl=1,jpl
	2346	ztmp3(:,:,1) = ztmp3(:,:,1) + cnd_ice(:,:,jl) * a_i(:,:,jl)
	2347	ENDDO
	2348	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_cond%clcat' )
	2349	END SELECT
	2350	CASE( 'ice only' )
	2351	ztmp3(:,:,1:jpl) = cnd_ice(:,:,1:jpl)
	2352	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_cond%cldes' )
	2353	END SELECT
	2354	IF( ssnd(jps_kice)%laction ) CALL cpl_snd( jps_kice, isec, ztmp3, info )
	2355	ENDIF
	2356	#endif
	2357
	2358	! ! ------------------------- !
[1534]	2359	! ! CO2 flux from PISCES !
	2360	! ! ------------------------- !
[12193]	2361	IF( ssnd(jps_co2)%laction .AND. l_co2cpl ) THEN
	2362	ztmp1(:,:) = oce_co2(:,:) * 1000. ! conversion in molC/m2/s
	2363	CALL cpl_snd( jps_co2, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ) , info )
	2364	ENDIF
[1534]	2365	!
[3294]	2366	! ! ------------------------- !
[1218]	2367	IF( ssnd(jps_ocx1)%laction ) THEN ! Surface current !
	2368	! ! ------------------------- !
[1467]	2369	!
	2370	! j+1 j -----V---F
[1694]	2371	! surface velocity always sent from T point ! \|
[1467]	2372	! j \| T U
	2373	! \| \|
	2374	! j j-1 -I-------\|
	2375	! (for I) \| \|
	2376	! i-1 i i
	2377	! i i+1 (for I)
[5407]	2378	IF( nn_components == jp_iam_opa ) THEN
[11949]	2379	zotx1(:,:) = uu(:,:,1,Kmm)
	2380	zoty1(:,:) = vv(:,:,1,Kmm)
[5407]	2381	ELSE
	2382	SELECT CASE( TRIM( sn_snd_crt%cldes ) )
	2383	CASE( 'oce only' ) ! C-grid ==> T
[1218]	2384	DO jj = 2, jpjm1
	2385	DO ji = fs_2, fs_jpim1 ! vector opt.
[11949]	2386	zotx1(ji,jj) = 0.5 * ( uu(ji,jj,1,Kmm) + uu(ji-1,jj ,1,Kmm) )
	2387	zoty1(ji,jj) = 0.5 * ( vv(ji,jj,1,Kmm) + vv(ji ,jj-1,1,Kmm) )
[1218]	2388	END DO
	2389	END DO
[9767]	2390	CASE( 'weighted oce and ice' ) ! Ocean and Ice on C-grid ==> T
	2391	DO jj = 2, jpjm1
	2392	DO ji = fs_2, fs_jpim1 ! vector opt.
[11949]	2393	zotx1(ji,jj) = 0.5 * ( uu (ji,jj,1,Kmm) + uu (ji-1,jj ,1,Kmm) ) * zfr_l(ji,jj)
	2394	zoty1(ji,jj) = 0.5 * ( vv (ji,jj,1,Kmm) + vv (ji ,jj-1,1,Kmm) ) * zfr_l(ji,jj)
	2395	zitx1(ji,jj) = 0.5 * ( u_ice(ji,jj ) + u_ice(ji-1,jj ) ) * fr_i(ji,jj)
	2396	zity1(ji,jj) = 0.5 * ( v_ice(ji,jj ) + v_ice(ji ,jj-1 ) ) * fr_i(ji,jj)
[1218]	2397	END DO
[9767]	2398	END DO
[10425]	2399	CALL lbc_lnk_multi( 'sbccpl', zitx1, 'T', -1., zity1, 'T', -1. )
[9767]	2400	CASE( 'mixed oce-ice' ) ! Ocean and Ice on C-grid ==> T
	2401	DO jj = 2, jpjm1
	2402	DO ji = fs_2, fs_jpim1 ! vector opt.
[11949]	2403	zotx1(ji,jj) = 0.5 * ( uu (ji,jj,1,Kmm) + uu (ji-1,jj ,1,Kmm) ) * zfr_l(ji,jj) &
	2404	& + 0.5 * ( u_ice(ji,jj ) + u_ice(ji-1,jj ) ) * fr_i(ji,jj)
	2405	zoty1(ji,jj) = 0.5 * ( vv (ji,jj,1,Kmm) + vv (ji ,jj-1,1,Kmm) ) * zfr_l(ji,jj) &
	2406	& + 0.5 * ( v_ice(ji,jj ) + v_ice(ji ,jj-1 ) ) * fr_i(ji,jj)
[1218]	2407	END DO
[9767]	2408	END DO
[1467]	2409	END SELECT
[10425]	2410	CALL lbc_lnk_multi( 'sbccpl', zotx1, ssnd(jps_ocx1)%clgrid, -1., zoty1, ssnd(jps_ocy1)%clgrid, -1. )
[5407]	2411	!
	2412	ENDIF
[888]	2413	!
[1218]	2414	!
[3294]	2415	IF( TRIM( sn_snd_crt%clvor ) == 'eastward-northward' ) THEN ! Rotation of the components
[1218]	2416	! ! Ocean component
	2417	CALL rot_rep( zotx1, zoty1, ssnd(jps_ocx1)%clgrid, 'ij->e', ztmp1 ) ! 1st component
	2418	CALL rot_rep( zotx1, zoty1, ssnd(jps_ocx1)%clgrid, 'ij->n', ztmp2 ) ! 2nd component
	2419	zotx1(:,:) = ztmp1(:,:) ! overwrite the components
	2420	zoty1(:,:) = ztmp2(:,:)
	2421	IF( ssnd(jps_ivx1)%laction ) THEN ! Ice component
	2422	CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->e', ztmp1 ) ! 1st component
	2423	CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->n', ztmp2 ) ! 2nd component
	2424	zitx1(:,:) = ztmp1(:,:) ! overwrite the components
	2425	zity1(:,:) = ztmp2(:,:)
	2426	ENDIF
	2427	ENDIF
	2428	!
	2429	! spherical coordinates to cartesian -> 2 components to 3 components
[3294]	2430	IF( TRIM( sn_snd_crt%clvref ) == 'cartesian' ) THEN
[1218]	2431	ztmp1(:,:) = zotx1(:,:) ! ocean currents
	2432	ztmp2(:,:) = zoty1(:,:)
[1226]	2433	CALL oce2geo ( ztmp1, ztmp2, 'T', zotx1, zoty1, zotz1 )
[1218]	2434	!
	2435	IF( ssnd(jps_ivx1)%laction ) THEN ! ice velocities
	2436	ztmp1(:,:) = zitx1(:,:)
	2437	ztmp1(:,:) = zity1(:,:)
[1226]	2438	CALL oce2geo ( ztmp1, ztmp2, 'T', zitx1, zity1, zitz1 )
[1218]	2439	ENDIF
	2440	ENDIF
	2441	!
[4990]	2442	IF( ssnd(jps_ocx1)%laction ) CALL cpl_snd( jps_ocx1, isec, RESHAPE ( zotx1, (/jpi,jpj,1/) ), info ) ! ocean x current 1st grid
	2443	IF( ssnd(jps_ocy1)%laction ) CALL cpl_snd( jps_ocy1, isec, RESHAPE ( zoty1, (/jpi,jpj,1/) ), info ) ! ocean y current 1st grid
	2444	IF( ssnd(jps_ocz1)%laction ) CALL cpl_snd( jps_ocz1, isec, RESHAPE ( zotz1, (/jpi,jpj,1/) ), info ) ! ocean z current 1st grid
[1218]	2445	!
[4990]	2446	IF( ssnd(jps_ivx1)%laction ) CALL cpl_snd( jps_ivx1, isec, RESHAPE ( zitx1, (/jpi,jpj,1/) ), info ) ! ice x current 1st grid
	2447	IF( ssnd(jps_ivy1)%laction ) CALL cpl_snd( jps_ivy1, isec, RESHAPE ( zity1, (/jpi,jpj,1/) ), info ) ! ice y current 1st grid
	2448	IF( ssnd(jps_ivz1)%laction ) CALL cpl_snd( jps_ivz1, isec, RESHAPE ( zitz1, (/jpi,jpj,1/) ), info ) ! ice z current 1st grid
[1534]	2449	!
[888]	2450	ENDIF
[2715]	2451	!
[7646]	2452	! ! ------------------------- !
	2453	! ! Surface current to waves !
	2454	! ! ------------------------- !
	2455	IF( ssnd(jps_ocxw)%laction .OR. ssnd(jps_ocyw)%laction ) THEN
	2456	!
	2457	! j+1 j -----V---F
	2458	! surface velocity always sent from T point ! \|
	2459	! j \| T U
	2460	! \| \|
	2461	! j j-1 -I-------\|
	2462	! (for I) \| \|
	2463	! i-1 i i
	2464	! i i+1 (for I)
	2465	SELECT CASE( TRIM( sn_snd_crtw%cldes ) )
	2466	CASE( 'oce only' ) ! C-grid ==> T
	2467	DO jj = 2, jpjm1
	2468	DO ji = fs_2, fs_jpim1 ! vector opt.
[11949]	2469	zotx1(ji,jj) = 0.5 * ( uu(ji,jj,1,Kmm) + uu(ji-1,jj ,1,Kmm) )
	2470	zoty1(ji,jj) = 0.5 * ( vv(ji,jj,1,Kmm) + vv(ji , jj-1,1,Kmm) )
[7646]	2471	END DO
	2472	END DO
[9767]	2473	CASE( 'weighted oce and ice' ) ! Ocean and Ice on C-grid ==> T
	2474	DO jj = 2, jpjm1
	2475	DO ji = fs_2, fs_jpim1 ! vector opt.
[11949]	2476	zotx1(ji,jj) = 0.5 * ( uu (ji,jj,1,Kmm) + uu (ji-1,jj ,1,Kmm) ) * zfr_l(ji,jj)
	2477	zoty1(ji,jj) = 0.5 * ( vv (ji,jj,1,Kmm) + vv (ji ,jj-1,1,Kmm) ) * zfr_l(ji,jj)
[9767]	2478	zitx1(ji,jj) = 0.5 * ( u_ice(ji,jj ) + u_ice(ji-1,jj ) ) * fr_i(ji,jj)
	2479	zity1(ji,jj) = 0.5 * ( v_ice(ji,jj ) + v_ice(ji ,jj-1 ) ) * fr_i(ji,jj)
	2480	END DO
	2481	END DO
[10425]	2482	CALL lbc_lnk_multi( 'sbccpl', zitx1, 'T', -1., zity1, 'T', -1. )
[9767]	2483	CASE( 'mixed oce-ice' ) ! Ocean and Ice on C-grid ==> T
	2484	DO jj = 2, jpjm1
	2485	DO ji = fs_2, fs_jpim1 ! vector opt.
[11949]	2486	zotx1(ji,jj) = 0.5 * ( uu (ji,jj,1,Kmm) + uu (ji-1,jj ,1,Kmm) ) * zfr_l(ji,jj) &
[9767]	2487	& + 0.5 * ( u_ice(ji,jj ) + u_ice(ji-1,jj ) ) * fr_i(ji,jj)
[11949]	2488	zoty1(ji,jj) = 0.5 * ( vv (ji,jj,1,Kmm) + vv (ji ,jj-1,1,Kmm) ) * zfr_l(ji,jj) &
[9767]	2489	& + 0.5 * ( v_ice(ji,jj ) + v_ice(ji ,jj-1 ) ) * fr_i(ji,jj)
	2490	END DO
	2491	END DO
	2492	END SELECT
[10425]	2493	CALL lbc_lnk_multi( 'sbccpl', zotx1, ssnd(jps_ocxw)%clgrid, -1., zoty1, ssnd(jps_ocyw)%clgrid, -1. )
[7646]	2494	!
	2495	!
	2496	IF( TRIM( sn_snd_crtw%clvor ) == 'eastward-northward' ) THEN ! Rotation of the components
	2497	! ! Ocean component
	2498	CALL rot_rep( zotx1, zoty1, ssnd(jps_ocxw)%clgrid, 'ij->e', ztmp1 ) ! 1st component
	2499	CALL rot_rep( zotx1, zoty1, ssnd(jps_ocxw)%clgrid, 'ij->n', ztmp2 ) ! 2nd component
	2500	zotx1(:,:) = ztmp1(:,:) ! overwrite the components
	2501	zoty1(:,:) = ztmp2(:,:)
	2502	IF( ssnd(jps_ivx1)%laction ) THEN ! Ice component
	2503	CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->e', ztmp1 ) ! 1st component
	2504	CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->n', ztmp2 ) ! 2nd component
	2505	zitx1(:,:) = ztmp1(:,:) ! overwrite the components
	2506	zity1(:,:) = ztmp2(:,:)
	2507	ENDIF
	2508	ENDIF
	2509	!
	2510	! ! spherical coordinates to cartesian -> 2 components to 3 components
	2511	! IF( TRIM( sn_snd_crtw%clvref ) == 'cartesian' ) THEN
	2512	! ztmp1(:,:) = zotx1(:,:) ! ocean currents
	2513	! ztmp2(:,:) = zoty1(:,:)
	2514	! CALL oce2geo ( ztmp1, ztmp2, 'T', zotx1, zoty1, zotz1 )
	2515	! !
	2516	! IF( ssnd(jps_ivx1)%laction ) THEN ! ice velocities
	2517	! ztmp1(:,:) = zitx1(:,:)
	2518	! ztmp1(:,:) = zity1(:,:)
	2519	! CALL oce2geo ( ztmp1, ztmp2, 'T', zitx1, zity1, zitz1 )
	2520	! ENDIF
	2521	! ENDIF
	2522	!
	2523	IF( ssnd(jps_ocxw)%laction ) CALL cpl_snd( jps_ocxw, isec, RESHAPE ( zotx1, (/jpi,jpj,1/) ), info ) ! ocean x current 1st grid
	2524	IF( ssnd(jps_ocyw)%laction ) CALL cpl_snd( jps_ocyw, isec, RESHAPE ( zoty1, (/jpi,jpj,1/) ), info ) ! ocean y current 1st grid
	2525	!
	2526	ENDIF
	2527	!
	2528	IF( ssnd(jps_ficet)%laction ) THEN
	2529	CALL cpl_snd( jps_ficet, isec, RESHAPE ( fr_i, (/jpi,jpj,1/) ), info )
[12182]	2530	ENDIF
[7646]	2531	! ! ------------------------- !
	2532	! ! Water levels to waves !
	2533	! ! ------------------------- !
	2534	IF( ssnd(jps_wlev)%laction ) THEN
	2535	IF( ln_apr_dyn ) THEN
	2536	IF( kt /= nit000 ) THEN
[11949]	2537	ztmp1(:,:) = ssh(:,:,Kbb) - 0.5 * ( ssh_ib(:,:) + ssh_ibb(:,:) )
[7646]	2538	ELSE
[11949]	2539	ztmp1(:,:) = ssh(:,:,Kbb)
[7646]	2540	ENDIF
	2541	ELSE
[11949]	2542	ztmp1(:,:) = ssh(:,:,Kmm)
[7646]	2543	ENDIF
	2544	CALL cpl_snd( jps_wlev , isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
[12182]	2545	ENDIF
[5407]	2546	!
	2547	! Fields sent by OPA to SAS when doing OPA<->SAS coupling
	2548	! ! SSH
	2549	IF( ssnd(jps_ssh )%laction ) THEN
	2550	! ! removed inverse barometer ssh when Patm
	2551	! forcing is used (for sea-ice dynamics)
[11949]	2552	IF( ln_apr_dyn ) THEN ; ztmp1(:,:) = ssh(:,:,Kbb) - 0.5 * ( ssh_ib(:,:) + ssh_ibb(:,:) )
	2553	ELSE ; ztmp1(:,:) = ssh(:,:,Kmm)
[5407]	2554	ENDIF
	2555	CALL cpl_snd( jps_ssh , isec, RESHAPE ( ztmp1 , (/jpi,jpj,1/) ), info )
	2556
	2557	ENDIF
	2558	! ! SSS
	2559	IF( ssnd(jps_soce )%laction ) THEN
[11949]	2560	CALL cpl_snd( jps_soce , isec, RESHAPE ( ts(:,:,1,jp_sal,Kmm), (/jpi,jpj,1/) ), info )
[5407]	2561	ENDIF
	2562	! ! first T level thickness
	2563	IF( ssnd(jps_e3t1st )%laction ) THEN
[11949]	2564	CALL cpl_snd( jps_e3t1st, isec, RESHAPE ( e3t(:,:,1,Kmm) , (/jpi,jpj,1/) ), info )
[5407]	2565	ENDIF
	2566	! ! Qsr fraction
	2567	IF( ssnd(jps_fraqsr)%laction ) THEN
	2568	CALL cpl_snd( jps_fraqsr, isec, RESHAPE ( fraqsr_1lev(:,:) , (/jpi,jpj,1/) ), info )
	2569	ENDIF
	2570	!
	2571	! Fields sent by SAS to OPA when OASIS coupling
	2572	! ! Solar heat flux
	2573	IF( ssnd(jps_qsroce)%laction ) CALL cpl_snd( jps_qsroce, isec, RESHAPE ( qsr , (/jpi,jpj,1/) ), info )
	2574	IF( ssnd(jps_qnsoce)%laction ) CALL cpl_snd( jps_qnsoce, isec, RESHAPE ( qns , (/jpi,jpj,1/) ), info )
	2575	IF( ssnd(jps_oemp )%laction ) CALL cpl_snd( jps_oemp , isec, RESHAPE ( emp , (/jpi,jpj,1/) ), info )
	2576	IF( ssnd(jps_sflx )%laction ) CALL cpl_snd( jps_sflx , isec, RESHAPE ( sfx , (/jpi,jpj,1/) ), info )
	2577	IF( ssnd(jps_otx1 )%laction ) CALL cpl_snd( jps_otx1 , isec, RESHAPE ( utau, (/jpi,jpj,1/) ), info )
	2578	IF( ssnd(jps_oty1 )%laction ) CALL cpl_snd( jps_oty1 , isec, RESHAPE ( vtau, (/jpi,jpj,1/) ), info )
	2579	IF( ssnd(jps_rnf )%laction ) CALL cpl_snd( jps_rnf , isec, RESHAPE ( rnf , (/jpi,jpj,1/) ), info )
	2580	IF( ssnd(jps_taum )%laction ) CALL cpl_snd( jps_taum , isec, RESHAPE ( taum, (/jpi,jpj,1/) ), info )
	2581
[9570]	2582	#if defined key_si3
[9019]	2583	! ! ------------------------- !
	2584	! ! Sea surface freezing temp !
	2585	! ! ------------------------- !
	2586	! needed by Met Office
[11949]	2587	CALL eos_fzp(ts(:,:,1,jp_sal,Kmm), sstfrz)
[9019]	2588	ztmp1(:,:) = sstfrz(:,:) + rt0
	2589	IF( ssnd(jps_sstfrz)%laction ) CALL cpl_snd( jps_sstfrz, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info)
	2590	#endif
[2715]	2591	!
[1226]	2592	END SUBROUTINE sbc_cpl_snd
[1218]	2593
[888]	2594	!!======================================================================
	2595	END MODULE sbccpl

Note: See TracBrowser for help on using the repository browser.

Download in other formats: