New URL for NEMO forge! http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.

sbccpl.F90 in NEMO/trunk/src/OCE/SBC – NEMO

Context Navigation

source: NEMO/trunk/src/OCE/SBC/sbccpl.F90 @ 12602

Last change on this file since 12602 was 12489, checked in by davestorkey, 4 years ago

Preparation for new timestepping scheme #2390.
Main changes:

Initial euler timestep now handled in stp and not in TRA/DYN routines.
Renaming of all timestep parameters. In summary, the namelist parameter is now rn_Dt and the current timestep is rDt (and rDt_ice, rDt_trc etc).
Renaming of a few miscellaneous parameters, eg. atfp -> rn_atfp (namelist parameter used everywhere) and rau0 -> rho0.

This version gives bit-comparable results to the previous version of the trunk.

Property svn:keywords set to Id

File size: 153.7 KB

Rev	Line
[888]	1	MODULE sbccpl
	2	!!======================================================================
	3	!! * MODULE sbccpl *
[1218]	4	!! Surface Boundary Condition : momentum, heat and freshwater fluxes in coupled mode
	5	!!======================================================================
[2528]	6	!! History : 2.0 ! 2007-06 (R. Redler, N. Keenlyside, W. Park) Original code split into flxmod & taumod
	7	!! 3.0 ! 2008-02 (G. Madec, C Talandier) surface module
	8	!! 3.1 ! 2009_02 (G. Madec, S. Masson, E. Maisonave, A. Caubel) generic coupled interface
[3294]	9	!! 3.4 ! 2011_11 (C. Harris) more flexibility + multi-category fields
[888]	10	!!----------------------------------------------------------------------
[9019]	11
[888]	12	!!----------------------------------------------------------------------
[1218]	13	!! namsbc_cpl : coupled formulation namlist
	14	!! sbc_cpl_init : initialisation of the coupled exchanges
	15	!! sbc_cpl_rcv : receive fields from the atmosphere over the ocean (ocean only)
	16	!! receive stress from the atmosphere over the ocean (ocean-ice case)
	17	!! sbc_cpl_ice_tau : receive stress from the atmosphere over ice
	18	!! sbc_cpl_ice_flx : receive fluxes from the atmosphere over ice
	19	!! sbc_cpl_snd : send fields to the atmosphere
[888]	20	!!----------------------------------------------------------------------
[7646]	21	USE dom_oce ! ocean space and time domain
	22	USE sbc_oce ! Surface boundary condition: ocean fields
	23	USE trc_oce ! share SMS/Ocean variables
	24	USE sbc_ice ! Surface boundary condition: ice fields
	25	USE sbcapr ! Stochastic param. : ???
	26	USE sbcdcy ! surface boundary condition: diurnal cycle
	27	USE sbcwave ! surface boundary condition: waves
	28	USE phycst ! physical constants
[12377]	29	USE isf_oce , ONLY : l_isfoasis, fwfisf_oasis ! ice shelf boundary condition
[9570]	30	#if defined key_si3
[6140]	31	USE ice ! ice variables
[1218]	32	#endif
[6140]	33	USE cpl_oasis3 ! OASIS3 coupling
	34	USE geo2ocean !
[12377]	35	USE oce , ONLY : ts, uu, vv, ssh, fraqsr_1lev
[9019]	36	USE ocealb !
[6140]	37	USE eosbn2 !
[9019]	38	USE sbcrnf , ONLY : l_rnfcpl
[3294]	39	#if defined key_cice
	40	USE ice_domain_size, only: ncat
	41	#endif
[9570]	42	#if defined key_si3
[9019]	43	USE icethd_dh ! for CALL ice_thd_snwblow
[5407]	44	#endif
[6140]	45	!
	46	USE in_out_manager ! I/O manager
	47	USE iom ! NetCDF library
	48	USE lib_mpp ! distribued memory computing library
	49	USE lbclnk ! ocean lateral boundary conditions (or mpp link)
[5407]	50
[1218]	51	IMPLICIT NONE
	52	PRIVATE
[5407]	53
[6140]	54	PUBLIC sbc_cpl_init ! routine called by sbcmod.F90
[9019]	55	PUBLIC sbc_cpl_rcv ! routine called by icestp.F90
[6140]	56	PUBLIC sbc_cpl_snd ! routine called by step.F90
[9019]	57	PUBLIC sbc_cpl_ice_tau ! routine called by icestp.F90
	58	PUBLIC sbc_cpl_ice_flx ! routine called by icestp.F90
[6140]	59	PUBLIC sbc_cpl_alloc ! routine called in sbcice_cice.F90
[2715]	60
[6140]	61	INTEGER, PARAMETER :: jpr_otx1 = 1 ! 3 atmosphere-ocean stress components on grid 1
	62	INTEGER, PARAMETER :: jpr_oty1 = 2 !
	63	INTEGER, PARAMETER :: jpr_otz1 = 3 !
	64	INTEGER, PARAMETER :: jpr_otx2 = 4 ! 3 atmosphere-ocean stress components on grid 2
	65	INTEGER, PARAMETER :: jpr_oty2 = 5 !
	66	INTEGER, PARAMETER :: jpr_otz2 = 6 !
	67	INTEGER, PARAMETER :: jpr_itx1 = 7 ! 3 atmosphere-ice stress components on grid 1
	68	INTEGER, PARAMETER :: jpr_ity1 = 8 !
	69	INTEGER, PARAMETER :: jpr_itz1 = 9 !
	70	INTEGER, PARAMETER :: jpr_itx2 = 10 ! 3 atmosphere-ice stress components on grid 2
	71	INTEGER, PARAMETER :: jpr_ity2 = 11 !
	72	INTEGER, PARAMETER :: jpr_itz2 = 12 !
	73	INTEGER, PARAMETER :: jpr_qsroce = 13 ! Qsr above the ocean
	74	INTEGER, PARAMETER :: jpr_qsrice = 14 ! Qsr above the ice
[1226]	75	INTEGER, PARAMETER :: jpr_qsrmix = 15
[6140]	76	INTEGER, PARAMETER :: jpr_qnsoce = 16 ! Qns above the ocean
	77	INTEGER, PARAMETER :: jpr_qnsice = 17 ! Qns above the ice
[1226]	78	INTEGER, PARAMETER :: jpr_qnsmix = 18
[6140]	79	INTEGER, PARAMETER :: jpr_rain = 19 ! total liquid precipitation (rain)
	80	INTEGER, PARAMETER :: jpr_snow = 20 ! solid precipitation over the ocean (snow)
	81	INTEGER, PARAMETER :: jpr_tevp = 21 ! total evaporation
	82	INTEGER, PARAMETER :: jpr_ievp = 22 ! solid evaporation (sublimation)
	83	INTEGER, PARAMETER :: jpr_sbpr = 23 ! sublimation - liquid precipitation - solid precipitation
	84	INTEGER, PARAMETER :: jpr_semp = 24 ! solid freshwater budget (sublimation - snow)
	85	INTEGER, PARAMETER :: jpr_oemp = 25 ! ocean freshwater budget (evap - precip)
	86	INTEGER, PARAMETER :: jpr_w10m = 26 ! 10m wind
	87	INTEGER, PARAMETER :: jpr_dqnsdt = 27 ! d(Q non solar)/d(temperature)
	88	INTEGER, PARAMETER :: jpr_rnf = 28 ! runoffs
	89	INTEGER, PARAMETER :: jpr_cal = 29 ! calving
	90	INTEGER, PARAMETER :: jpr_taum = 30 ! wind stress module
[1696]	91	INTEGER, PARAMETER :: jpr_co2 = 31
[6140]	92	INTEGER, PARAMETER :: jpr_topm = 32 ! topmeltn
	93	INTEGER, PARAMETER :: jpr_botm = 33 ! botmeltn
	94	INTEGER, PARAMETER :: jpr_sflx = 34 ! salt flux
	95	INTEGER, PARAMETER :: jpr_toce = 35 ! ocean temperature
	96	INTEGER, PARAMETER :: jpr_soce = 36 ! ocean salinity
	97	INTEGER, PARAMETER :: jpr_ocx1 = 37 ! ocean current on grid 1
	98	INTEGER, PARAMETER :: jpr_ocy1 = 38 !
	99	INTEGER, PARAMETER :: jpr_ssh = 39 ! sea surface height
	100	INTEGER, PARAMETER :: jpr_fice = 40 ! ice fraction
	101	INTEGER, PARAMETER :: jpr_e3t1st = 41 ! first T level thickness
	102	INTEGER, PARAMETER :: jpr_fraqsr = 42 ! fraction of solar net radiation absorbed in the first ocean level
[7646]	103	INTEGER, PARAMETER :: jpr_mslp = 43 ! mean sea level pressure
	104	INTEGER, PARAMETER :: jpr_hsig = 44 ! Hsig
	105	INTEGER, PARAMETER :: jpr_phioc = 45 ! Wave=>ocean energy flux
	106	INTEGER, PARAMETER :: jpr_sdrftx = 46 ! Stokes drift on grid 1
	107	INTEGER, PARAMETER :: jpr_sdrfty = 47 ! Stokes drift on grid 2
	108	INTEGER, PARAMETER :: jpr_wper = 48 ! Mean wave period
	109	INTEGER, PARAMETER :: jpr_wnum = 49 ! Mean wavenumber
[9034]	110	INTEGER, PARAMETER :: jpr_tauwoc = 50 ! Stress fraction adsorbed by waves
[7646]	111	INTEGER, PARAMETER :: jpr_wdrag = 51 ! Neutral surface drag coefficient
[7788]	112	INTEGER, PARAMETER :: jpr_isf = 52
	113	INTEGER, PARAMETER :: jpr_icb = 53
[9023]	114	INTEGER, PARAMETER :: jpr_wfreq = 54 ! Wave peak frequency
	115	INTEGER, PARAMETER :: jpr_tauwx = 55 ! x component of the ocean stress from waves
	116	INTEGER, PARAMETER :: jpr_tauwy = 56 ! y component of the ocean stress from waves
	117	INTEGER, PARAMETER :: jpr_ts_ice = 57 ! Sea ice surface temp
[3294]	118
[9023]	119	INTEGER, PARAMETER :: jprcv = 57 ! total number of fields received
[7788]	120
[6140]	121	INTEGER, PARAMETER :: jps_fice = 1 ! ice fraction sent to the atmosphere
	122	INTEGER, PARAMETER :: jps_toce = 2 ! ocean temperature
	123	INTEGER, PARAMETER :: jps_tice = 3 ! ice temperature
	124	INTEGER, PARAMETER :: jps_tmix = 4 ! mixed temperature (ocean+ice)
	125	INTEGER, PARAMETER :: jps_albice = 5 ! ice albedo
	126	INTEGER, PARAMETER :: jps_albmix = 6 ! mixed albedo
	127	INTEGER, PARAMETER :: jps_hice = 7 ! ice thickness
	128	INTEGER, PARAMETER :: jps_hsnw = 8 ! snow thickness
	129	INTEGER, PARAMETER :: jps_ocx1 = 9 ! ocean current on grid 1
	130	INTEGER, PARAMETER :: jps_ocy1 = 10 !
	131	INTEGER, PARAMETER :: jps_ocz1 = 11 !
	132	INTEGER, PARAMETER :: jps_ivx1 = 12 ! ice current on grid 1
	133	INTEGER, PARAMETER :: jps_ivy1 = 13 !
	134	INTEGER, PARAMETER :: jps_ivz1 = 14 !
[1534]	135	INTEGER, PARAMETER :: jps_co2 = 15
[6140]	136	INTEGER, PARAMETER :: jps_soce = 16 ! ocean salinity
	137	INTEGER, PARAMETER :: jps_ssh = 17 ! sea surface height
	138	INTEGER, PARAMETER :: jps_qsroce = 18 ! Qsr above the ocean
	139	INTEGER, PARAMETER :: jps_qnsoce = 19 ! Qns above the ocean
	140	INTEGER, PARAMETER :: jps_oemp = 20 ! ocean freshwater budget (evap - precip)
	141	INTEGER, PARAMETER :: jps_sflx = 21 ! salt flux
	142	INTEGER, PARAMETER :: jps_otx1 = 22 ! 2 atmosphere-ocean stress components on grid 1
	143	INTEGER, PARAMETER :: jps_oty1 = 23 !
	144	INTEGER, PARAMETER :: jps_rnf = 24 ! runoffs
	145	INTEGER, PARAMETER :: jps_taum = 25 ! wind stress module
	146	INTEGER, PARAMETER :: jps_fice2 = 26 ! ice fraction sent to OPA (by SAS when doing SAS-OPA coupling)
	147	INTEGER, PARAMETER :: jps_e3t1st = 27 ! first level depth (vvl)
	148	INTEGER, PARAMETER :: jps_fraqsr = 28 ! fraction of solar net radiation absorbed in the first ocean level
[7646]	149	INTEGER, PARAMETER :: jps_ficet = 29 ! total ice fraction
	150	INTEGER, PARAMETER :: jps_ocxw = 30 ! currents on grid 1
	151	INTEGER, PARAMETER :: jps_ocyw = 31 ! currents on grid 2
	152	INTEGER, PARAMETER :: jps_wlev = 32 ! water level
[9019]	153	INTEGER, PARAMETER :: jps_fice1 = 33 ! first-order ice concentration (for semi-implicit coupling of atmos-ice fluxes)
	154	INTEGER, PARAMETER :: jps_a_p = 34 ! meltpond area
	155	INTEGER, PARAMETER :: jps_ht_p = 35 ! meltpond thickness
	156	INTEGER, PARAMETER :: jps_kice = 36 ! sea ice effective conductivity
	157	INTEGER, PARAMETER :: jps_sstfrz = 37 ! sea surface freezing temperature
	158	INTEGER, PARAMETER :: jps_ttilyr = 38 ! sea ice top layer temp
[3294]	159
[9019]	160	INTEGER, PARAMETER :: jpsnd = 38 ! total number of fields sent
	161
[6140]	162	! !! namelist namsbc_cpl
	163	TYPE :: FLD_C !
	164	CHARACTER(len = 32) :: cldes ! desciption of the coupling strategy
	165	CHARACTER(len = 32) :: clcat ! multiple ice categories strategy
	166	CHARACTER(len = 32) :: clvref ! reference of vector ('spherical' or 'cartesian')
	167	CHARACTER(len = 32) :: clvor ! orientation of vector fields ('eastward-northward' or 'local grid')
	168	CHARACTER(len = 32) :: clvgrd ! grids on which is located the vector fields
[3294]	169	END TYPE FLD_C
[6140]	170	! ! Send to the atmosphere
[9019]	171	TYPE(FLD_C) :: sn_snd_temp , sn_snd_alb , sn_snd_thick, sn_snd_crt , sn_snd_co2, &
	172	& sn_snd_thick1, sn_snd_cond, sn_snd_mpnd , sn_snd_sstfrz, sn_snd_ttilyr
[6140]	173	! ! Received from the atmosphere
[9023]	174	TYPE(FLD_C) :: sn_rcv_w10m, sn_rcv_taumod, sn_rcv_tau, sn_rcv_tauw, sn_rcv_dqnsdt, sn_rcv_qsr, &
[9019]	175	& sn_rcv_qns , sn_rcv_emp , sn_rcv_rnf, sn_rcv_ts_ice
	176	TYPE(FLD_C) :: sn_rcv_cal, sn_rcv_iceflx, sn_rcv_co2, sn_rcv_mslp, sn_rcv_icb, sn_rcv_isf
[7646]	177	! Send to waves
	178	TYPE(FLD_C) :: sn_snd_ifrac, sn_snd_crtw, sn_snd_wlev
	179	! Received from waves
[9033]	180	TYPE(FLD_C) :: sn_rcv_hsig, sn_rcv_phioc, sn_rcv_sdrfx, sn_rcv_sdrfy, sn_rcv_wper, sn_rcv_wnum, sn_rcv_tauwoc, &
[9023]	181	sn_rcv_wdrag, sn_rcv_wfreq
[6140]	182	! ! Other namelist parameters
	183	INTEGER :: nn_cplmodel ! Maximum number of models to/from which NEMO is potentialy sending/receiving data
	184	LOGICAL :: ln_usecplmask ! use a coupling mask file to merge data received from several models
[9019]	185	! -> file cplmask.nc with the float variable called cplmask (jpi,jpj,nn_cplmodel)
[3294]	186	TYPE :: DYNARR
[9019]	187	REAL(wp), POINTER, DIMENSION(:,:,:) :: z3
[3294]	188	END TYPE DYNARR
[888]	189
[9019]	190	TYPE( DYNARR ), SAVE, DIMENSION(jprcv) :: frcv ! all fields recieved from the atmosphere
[3294]	191
[9019]	192	REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) :: alb_oce_mix ! ocean albedo sent to atmosphere (mix clear/overcast sky)
[888]	193
[7646]	194	REAL(wp) :: rpref = 101000._wp ! reference atmospheric pressure[N/m2]
[12489]	195	REAL(wp) :: r1_grau ! = 1.e0 / (grav * rho0)
[888]	196
[9019]	197	INTEGER , ALLOCATABLE, SAVE, DIMENSION(:) :: nrcvinfo ! OASIS info argument
[7646]	198
[1218]	199	!! Substitution
[12377]	200	# include "do_loop_substitute.h90"
[1218]	201	!!----------------------------------------------------------------------
[9598]	202	!! NEMO/OCE 4.0 , NEMO Consortium (2018)
[1226]	203	!! $Id$
[10068]	204	!! Software governed by the CeCILL license (see ./LICENSE)
[1218]	205	!!----------------------------------------------------------------------
	206	CONTAINS
	207
[2715]	208	INTEGER FUNCTION sbc_cpl_alloc()
	209	!!----------------------------------------------------------------------
	210	!! * FUNCTION sbc_cpl_alloc *
	211	!!----------------------------------------------------------------------
[7646]	212	INTEGER :: ierr(4)
[2715]	213	!!----------------------------------------------------------------------
	214	ierr(:) = 0
	215	!
[9019]	216	ALLOCATE( alb_oce_mix(jpi,jpj), nrcvinfo(jprcv), STAT=ierr(1) )
[4990]	217
[9570]	218	#if ! defined key_si3 && ! defined key_cice
[4990]	219	ALLOCATE( a_i(jpi,jpj,1) , STAT=ierr(2) ) ! used in sbcice_if.F90 (done here as there is no sbc_ice_if_init)
	220	#endif
[5407]	221	ALLOCATE( xcplmask(jpi,jpj,0:nn_cplmodel) , STAT=ierr(3) )
[2715]	222	!
[7646]	223	IF( .NOT. ln_apr_dyn ) ALLOCATE( ssh_ib(jpi,jpj), ssh_ibb(jpi,jpj), apr(jpi, jpj), STAT=ierr(4) )
	224
[2715]	225	sbc_cpl_alloc = MAXVAL( ierr )
[10425]	226	CALL mpp_sum ( 'sbccpl', sbc_cpl_alloc )
[2715]	227	IF( sbc_cpl_alloc > 0 ) CALL ctl_warn('sbc_cpl_alloc: allocation of arrays failed')
	228	!
	229	END FUNCTION sbc_cpl_alloc
	230
	231
[1218]	232	SUBROUTINE sbc_cpl_init( k_ice )
	233	!!----------------------------------------------------------------------
	234	!! * ROUTINE sbc_cpl_init *
	235	!!
[4990]	236	!! ** Purpose : Initialisation of send and received information from
[1218]	237	!! the atmospheric component
	238	!!
	239	!! ** Method : * Read namsbc_cpl namelist
	240	!! * define the receive interface
	241	!! * define the send interface
	242	!! * initialise the OASIS coupler
	243	!!----------------------------------------------------------------------
[6140]	244	INTEGER, INTENT(in) :: k_ice ! ice management in the sbc (=0/1/2/3)
	245	!
	246	INTEGER :: jn ! dummy loop index
	247	INTEGER :: ios, inum ! Local integer
[9019]	248	REAL(wp), DIMENSION(jpi,jpj) :: zacs, zaos
[1218]	249	!!
[9019]	250	NAMELIST/namsbc_cpl/ sn_snd_temp , sn_snd_alb , sn_snd_thick, sn_snd_crt , sn_snd_co2 , &
[10617]	251	& sn_snd_ttilyr, sn_snd_cond , sn_snd_mpnd , sn_snd_sstfrz, sn_snd_thick1, &
	252	& sn_snd_ifrac , sn_snd_crtw , sn_snd_wlev , sn_rcv_hsig , sn_rcv_phioc, &
[9019]	253	& sn_rcv_w10m , sn_rcv_taumod, sn_rcv_tau , sn_rcv_dqnsdt, sn_rcv_qsr , &
[10617]	254	& sn_rcv_sdrfx , sn_rcv_sdrfy , sn_rcv_wper , sn_rcv_wnum , sn_rcv_tauwoc, &
[9019]	255	& sn_rcv_wdrag , sn_rcv_qns , sn_rcv_emp , sn_rcv_rnf , sn_rcv_cal , &
	256	& sn_rcv_iceflx, sn_rcv_co2 , nn_cplmodel , ln_usecplmask, sn_rcv_mslp , &
[10617]	257	& sn_rcv_icb , sn_rcv_isf , sn_rcv_wfreq , sn_rcv_tauw, nn_cats_cpl , &
	258	& sn_rcv_ts_ice
[7788]	259
[1218]	260	!!---------------------------------------------------------------------
[3294]	261	!
[1218]	262	! ================================ !
	263	! Namelist informations !
	264	! ================================ !
[6140]	265	!
[4147]	266	READ ( numnam_ref, namsbc_cpl, IOSTAT = ios, ERR = 901)
[11536]	267	901 IF( ios /= 0 ) CALL ctl_nam ( ios , 'namsbc_cpl in reference namelist' )
[6140]	268	!
[4147]	269	READ ( numnam_cfg, namsbc_cpl, IOSTAT = ios, ERR = 902 )
[11536]	270	902 IF( ios > 0 ) CALL ctl_nam ( ios , 'namsbc_cpl in configuration namelist' )
[4624]	271	IF(lwm) WRITE ( numond, namsbc_cpl )
[6140]	272	!
[1218]	273	IF(lwp) THEN ! control print
	274	WRITE(numout,*)
	275	WRITE(numout,*)'sbc_cpl_init : namsbc_cpl namelist '
	276	WRITE(numout,*)'~~~~~~~~~~~~'
[5407]	277	ENDIF
	278	IF( lwp .AND. ln_cpl ) THEN ! control print
[3294]	279	WRITE(numout,*)' received fields (mutiple ice categogies)'
	280	WRITE(numout,*)' 10m wind module = ', TRIM(sn_rcv_w10m%cldes ), ' (', TRIM(sn_rcv_w10m%clcat ), ')'
	281	WRITE(numout,*)' stress module = ', TRIM(sn_rcv_taumod%cldes), ' (', TRIM(sn_rcv_taumod%clcat), ')'
	282	WRITE(numout,*)' surface stress = ', TRIM(sn_rcv_tau%cldes ), ' (', TRIM(sn_rcv_tau%clcat ), ')'
	283	WRITE(numout,*)' - referential = ', sn_rcv_tau%clvref
	284	WRITE(numout,*)' - orientation = ', sn_rcv_tau%clvor
	285	WRITE(numout,*)' - mesh = ', sn_rcv_tau%clvgrd
	286	WRITE(numout,*)' non-solar heat flux sensitivity = ', TRIM(sn_rcv_dqnsdt%cldes), ' (', TRIM(sn_rcv_dqnsdt%clcat), ')'
	287	WRITE(numout,*)' solar heat flux = ', TRIM(sn_rcv_qsr%cldes ), ' (', TRIM(sn_rcv_qsr%clcat ), ')'
	288	WRITE(numout,*)' non-solar heat flux = ', TRIM(sn_rcv_qns%cldes ), ' (', TRIM(sn_rcv_qns%clcat ), ')'
	289	WRITE(numout,*)' freshwater budget = ', TRIM(sn_rcv_emp%cldes ), ' (', TRIM(sn_rcv_emp%clcat ), ')'
	290	WRITE(numout,*)' runoffs = ', TRIM(sn_rcv_rnf%cldes ), ' (', TRIM(sn_rcv_rnf%clcat ), ')'
	291	WRITE(numout,*)' calving = ', TRIM(sn_rcv_cal%cldes ), ' (', TRIM(sn_rcv_cal%clcat ), ')'
[7788]	292	WRITE(numout,*)' iceberg = ', TRIM(sn_rcv_icb%cldes ), ' (', TRIM(sn_rcv_icb%clcat ), ')'
	293	WRITE(numout,*)' ice shelf = ', TRIM(sn_rcv_isf%cldes ), ' (', TRIM(sn_rcv_isf%clcat ), ')'
[3294]	294	WRITE(numout,*)' sea ice heat fluxes = ', TRIM(sn_rcv_iceflx%cldes), ' (', TRIM(sn_rcv_iceflx%clcat), ')'
	295	WRITE(numout,*)' atm co2 = ', TRIM(sn_rcv_co2%cldes ), ' (', TRIM(sn_rcv_co2%clcat ), ')'
[7646]	296	WRITE(numout,*)' significant wave heigth = ', TRIM(sn_rcv_hsig%cldes ), ' (', TRIM(sn_rcv_hsig%clcat ), ')'
	297	WRITE(numout,*)' wave to oce energy flux = ', TRIM(sn_rcv_phioc%cldes ), ' (', TRIM(sn_rcv_phioc%clcat ), ')'
	298	WRITE(numout,*)' Surface Stokes drift grid u = ', TRIM(sn_rcv_sdrfx%cldes ), ' (', TRIM(sn_rcv_sdrfx%clcat ), ')'
	299	WRITE(numout,*)' Surface Stokes drift grid v = ', TRIM(sn_rcv_sdrfy%cldes ), ' (', TRIM(sn_rcv_sdrfy%clcat ), ')'
	300	WRITE(numout,*)' Mean wave period = ', TRIM(sn_rcv_wper%cldes ), ' (', TRIM(sn_rcv_wper%clcat ), ')'
	301	WRITE(numout,*)' Mean wave number = ', TRIM(sn_rcv_wnum%cldes ), ' (', TRIM(sn_rcv_wnum%clcat ), ')'
[9023]	302	WRITE(numout,*)' Wave peak frequency = ', TRIM(sn_rcv_wfreq%cldes ), ' (', TRIM(sn_rcv_wfreq%clcat ), ')'
[9034]	303	WRITE(numout,*)' Stress frac adsorbed by waves = ', TRIM(sn_rcv_tauwoc%cldes), ' (', TRIM(sn_rcv_tauwoc%clcat ), ')'
[9023]	304	WRITE(numout,*)' Stress components by waves = ', TRIM(sn_rcv_tauw%cldes ), ' (', TRIM(sn_rcv_tauw%clcat ), ')'
[7646]	305	WRITE(numout,*)' Neutral surf drag coefficient = ', TRIM(sn_rcv_wdrag%cldes ), ' (', TRIM(sn_rcv_wdrag%clcat ), ')'
[9019]	306	WRITE(numout,*)' Sea ice surface skin temperature= ', TRIM(sn_rcv_ts_ice%cldes), ' (', TRIM(sn_rcv_ts_ice%clcat), ')'
[3294]	307	WRITE(numout,*)' sent fields (multiple ice categories)'
	308	WRITE(numout,*)' surface temperature = ', TRIM(sn_snd_temp%cldes ), ' (', TRIM(sn_snd_temp%clcat ), ')'
[9019]	309	WRITE(numout,*)' top ice layer temperature = ', TRIM(sn_snd_ttilyr%cldes), ' (', TRIM(sn_snd_ttilyr%clcat), ')'
[3294]	310	WRITE(numout,*)' albedo = ', TRIM(sn_snd_alb%cldes ), ' (', TRIM(sn_snd_alb%clcat ), ')'
	311	WRITE(numout,*)' ice/snow thickness = ', TRIM(sn_snd_thick%cldes ), ' (', TRIM(sn_snd_thick%clcat ), ')'
[7646]	312	WRITE(numout,*)' total ice fraction = ', TRIM(sn_snd_ifrac%cldes ), ' (', TRIM(sn_snd_ifrac%clcat ), ')'
[3294]	313	WRITE(numout,*)' surface current = ', TRIM(sn_snd_crt%cldes ), ' (', TRIM(sn_snd_crt%clcat ), ')'
	314	WRITE(numout,*)' - referential = ', sn_snd_crt%clvref
	315	WRITE(numout,*)' - orientation = ', sn_snd_crt%clvor
	316	WRITE(numout,*)' - mesh = ', sn_snd_crt%clvgrd
	317	WRITE(numout,*)' oce co2 flux = ', TRIM(sn_snd_co2%cldes ), ' (', TRIM(sn_snd_co2%clcat ), ')'
[9019]	318	WRITE(numout,*)' ice effective conductivity = ', TRIM(sn_snd_cond%cldes ), ' (', TRIM(sn_snd_cond%clcat ), ')'
	319	WRITE(numout,*)' meltponds fraction and depth = ', TRIM(sn_snd_mpnd%cldes ), ' (', TRIM(sn_snd_mpnd%clcat ), ')'
	320	WRITE(numout,*)' sea surface freezing temp = ', TRIM(sn_snd_sstfrz%cldes), ' (', TRIM(sn_snd_sstfrz%clcat), ')'
[7646]	321	WRITE(numout,*)' water level = ', TRIM(sn_snd_wlev%cldes ), ' (', TRIM(sn_snd_wlev%clcat ), ')'
	322	WRITE(numout,*)' mean sea level pressure = ', TRIM(sn_rcv_mslp%cldes ), ' (', TRIM(sn_rcv_mslp%clcat ), ')'
	323	WRITE(numout,*)' surface current to waves = ', TRIM(sn_snd_crtw%cldes ), ' (', TRIM(sn_snd_crtw%clcat ), ')'
	324	WRITE(numout,*)' - referential = ', sn_snd_crtw%clvref
	325	WRITE(numout,*)' - orientation = ', sn_snd_crtw%clvor
	326	WRITE(numout,*)' - mesh = ', sn_snd_crtw%clvgrd
[4990]	327	WRITE(numout,*)' nn_cplmodel = ', nn_cplmodel
	328	WRITE(numout,*)' ln_usecplmask = ', ln_usecplmask
[9019]	329	WRITE(numout,*)' nn_cats_cpl = ', nn_cats_cpl
[1218]	330	ENDIF
[888]	331
[3294]	332	! ! allocate sbccpl arrays
[2715]	333	IF( sbc_cpl_alloc() /= 0 ) CALL ctl_stop( 'STOP', 'sbc_cpl_alloc : unable to allocate arrays' )
[1218]	334
	335	! ================================ !
	336	! Define the receive interface !
	337	! ================================ !
[1698]	338	nrcvinfo(:) = OASIS_idle ! needed by nrcvinfo(jpr_otx1) if we do not receive ocean stress
[888]	339
[1218]	340	! for each field: define the OASIS name (srcv(:)%clname)
	341	! define receive or not from the namelist parameters (srcv(:)%laction)
	342	! define the north fold type of lbc (srcv(:)%nsgn)
[888]	343
[1218]	344	! default definitions of srcv
[3294]	345	srcv(:)%laction = .FALSE. ; srcv(:)%clgrid = 'T' ; srcv(:)%nsgn = 1. ; srcv(:)%nct = 1
[888]	346
[1218]	347	! ! ------------------------- !
	348	! ! ice and ocean wind stress !
	349	! ! ------------------------- !
	350	! ! Name
	351	srcv(jpr_otx1)%clname = 'O_OTaux1' ! 1st ocean component on grid ONE (T or U)
	352	srcv(jpr_oty1)%clname = 'O_OTauy1' ! 2nd - - - -
	353	srcv(jpr_otz1)%clname = 'O_OTauz1' ! 3rd - - - -
	354	srcv(jpr_otx2)%clname = 'O_OTaux2' ! 1st ocean component on grid TWO (V)
	355	srcv(jpr_oty2)%clname = 'O_OTauy2' ! 2nd - - - -
	356	srcv(jpr_otz2)%clname = 'O_OTauz2' ! 3rd - - - -
	357	!
	358	srcv(jpr_itx1)%clname = 'O_ITaux1' ! 1st ice component on grid ONE (T, F, I or U)
	359	srcv(jpr_ity1)%clname = 'O_ITauy1' ! 2nd - - - -
	360	srcv(jpr_itz1)%clname = 'O_ITauz1' ! 3rd - - - -
	361	srcv(jpr_itx2)%clname = 'O_ITaux2' ! 1st ice component on grid TWO (V)
	362	srcv(jpr_ity2)%clname = 'O_ITauy2' ! 2nd - - - -
	363	srcv(jpr_itz2)%clname = 'O_ITauz2' ! 3rd - - - -
	364	!
[1833]	365	! Vectors: change of sign at north fold ONLY if on the local grid
[7646]	366	IF( TRIM( sn_rcv_tau%cldes ) == 'oce only' .OR. TRIM(sn_rcv_tau%cldes ) == 'oce and ice') THEN ! avoid working with the atmospheric fields if they are not coupled
[3294]	367	IF( TRIM( sn_rcv_tau%clvor ) == 'local grid' ) srcv(jpr_otx1:jpr_itz2)%nsgn = -1.
[1218]	368
	369	! ! Set grid and action
[3294]	370	SELECT CASE( TRIM( sn_rcv_tau%clvgrd ) ) ! 'T', 'U,V', 'U,V,I', 'U,V,F', 'T,I', 'T,F', or 'T,U,V'
[1218]	371	CASE( 'T' )
	372	srcv(jpr_otx1:jpr_itz2)%clgrid = 'T' ! oce and ice components given at T-point
	373	srcv(jpr_otx1:jpr_otz1)%laction = .TRUE. ! receive oce components on grid 1
	374	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1
	375	CASE( 'U,V' )
	376	srcv(jpr_otx1:jpr_otz1)%clgrid = 'U' ! oce components given at U-point
	377	srcv(jpr_otx2:jpr_otz2)%clgrid = 'V' ! and V-point
	378	srcv(jpr_itx1:jpr_itz1)%clgrid = 'U' ! ice components given at U-point
	379	srcv(jpr_itx2:jpr_itz2)%clgrid = 'V' ! and V-point
	380	srcv(jpr_otx1:jpr_itz2)%laction = .TRUE. ! receive oce and ice components on both grid 1 & 2
	381	CASE( 'U,V,T' )
	382	srcv(jpr_otx1:jpr_otz1)%clgrid = 'U' ! oce components given at U-point
	383	srcv(jpr_otx2:jpr_otz2)%clgrid = 'V' ! and V-point
	384	srcv(jpr_itx1:jpr_itz1)%clgrid = 'T' ! ice components given at T-point
	385	srcv(jpr_otx1:jpr_otz2)%laction = .TRUE. ! receive oce components on grid 1 & 2
	386	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1 only
	387	CASE( 'U,V,I' )
	388	srcv(jpr_otx1:jpr_otz1)%clgrid = 'U' ! oce components given at U-point
	389	srcv(jpr_otx2:jpr_otz2)%clgrid = 'V' ! and V-point
	390	srcv(jpr_itx1:jpr_itz1)%clgrid = 'I' ! ice components given at I-point
	391	srcv(jpr_otx1:jpr_otz2)%laction = .TRUE. ! receive oce components on grid 1 & 2
	392	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1 only
	393	CASE( 'U,V,F' )
	394	srcv(jpr_otx1:jpr_otz1)%clgrid = 'U' ! oce components given at U-point
	395	srcv(jpr_otx2:jpr_otz2)%clgrid = 'V' ! and V-point
	396	srcv(jpr_itx1:jpr_itz1)%clgrid = 'F' ! ice components given at F-point
	397	srcv(jpr_otx1:jpr_otz2)%laction = .TRUE. ! receive oce components on grid 1 & 2
	398	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1 only
	399	CASE( 'T,I' )
	400	srcv(jpr_otx1:jpr_itz2)%clgrid = 'T' ! oce and ice components given at T-point
	401	srcv(jpr_itx1:jpr_itz1)%clgrid = 'I' ! ice components given at I-point
	402	srcv(jpr_otx1:jpr_otz1)%laction = .TRUE. ! receive oce components on grid 1
	403	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1
	404	CASE( 'T,F' )
	405	srcv(jpr_otx1:jpr_itz2)%clgrid = 'T' ! oce and ice components given at T-point
	406	srcv(jpr_itx1:jpr_itz1)%clgrid = 'F' ! ice components given at F-point
	407	srcv(jpr_otx1:jpr_otz1)%laction = .TRUE. ! receive oce components on grid 1
	408	srcv(jpr_itx1:jpr_itz1)%laction = .TRUE. ! receive ice components on grid 1
	409	CASE( 'T,U,V' )
	410	srcv(jpr_otx1:jpr_otz1)%clgrid = 'T' ! oce components given at T-point
	411	srcv(jpr_itx1:jpr_itz1)%clgrid = 'U' ! ice components given at U-point
	412	srcv(jpr_itx2:jpr_itz2)%clgrid = 'V' ! and V-point
	413	srcv(jpr_otx1:jpr_otz1)%laction = .TRUE. ! receive oce components on grid 1 only
	414	srcv(jpr_itx1:jpr_itz2)%laction = .TRUE. ! receive ice components on grid 1 & 2
	415	CASE default
[3294]	416	CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_tau%clvgrd' )
[1218]	417	END SELECT
	418	!
[3294]	419	IF( TRIM( sn_rcv_tau%clvref ) == 'spherical' ) & ! spherical: 3rd component not received
[1218]	420	& srcv( (/jpr_otz1, jpr_otz2, jpr_itz1, jpr_itz2/) )%laction = .FALSE.
	421	!
[3680]	422	IF( TRIM( sn_rcv_tau%clvor ) == 'local grid' ) THEN ! already on local grid -> no need of the second grid
	423	srcv(jpr_otx2:jpr_otz2)%laction = .FALSE.
	424	srcv(jpr_itx2:jpr_itz2)%laction = .FALSE.
	425	srcv(jpr_oty1)%clgrid = srcv(jpr_oty2)%clgrid ! not needed but cleaner...
	426	srcv(jpr_ity1)%clgrid = srcv(jpr_ity2)%clgrid ! not needed but cleaner...
	427	ENDIF
	428	!
[3294]	429	IF( TRIM( sn_rcv_tau%cldes ) /= 'oce and ice' ) THEN ! 'oce and ice' case ocean stress on ocean mesh used
[4162]	430	srcv(jpr_itx1:jpr_itz2)%laction = .FALSE. ! ice components not received
[1218]	431	srcv(jpr_itx1)%clgrid = 'U' ! ocean stress used after its transformation
	432	srcv(jpr_ity1)%clgrid = 'V' ! i.e. it is always at U- & V-points for i- & j-comp. resp.
	433	ENDIF
[7646]	434	ENDIF
	435
[1218]	436	! ! ------------------------- !
	437	! ! freshwater budget ! E-P
	438	! ! ------------------------- !
	439	! we suppose that atmosphere modele do not make the difference between precipiration (liquide or solid)
	440	! over ice of free ocean within the same atmospheric cell.cd
	441	srcv(jpr_rain)%clname = 'OTotRain' ! Rain = liquid precipitation
	442	srcv(jpr_snow)%clname = 'OTotSnow' ! Snow = solid precipitation
	443	srcv(jpr_tevp)%clname = 'OTotEvap' ! total evaporation (over oce + ice sublimation)
	444	srcv(jpr_ievp)%clname = 'OIceEvap' ! evaporation over ice = sublimation
[1232]	445	srcv(jpr_sbpr)%clname = 'OSubMPre' ! sublimation - liquid precipitation - solid precipitation
	446	srcv(jpr_semp)%clname = 'OISubMSn' ! ice solid water budget = sublimation - solid precipitation
	447	srcv(jpr_oemp)%clname = 'OOEvaMPr' ! ocean water budget = ocean Evap - ocean precip
[3294]	448	SELECT CASE( TRIM( sn_rcv_emp%cldes ) )
[5407]	449	CASE( 'none' ) ! nothing to do
[9019]	450	CASE( 'oce only' ) ; srcv(jpr_oemp)%laction = .TRUE.
[4162]	451	CASE( 'conservative' )
	452	srcv( (/jpr_rain, jpr_snow, jpr_ievp, jpr_tevp/) )%laction = .TRUE.
[12377]	453	IF( k_ice <= 1 ) srcv(jpr_ievp)%laction = .FALSE.
[1232]	454	CASE( 'oce and ice' ) ; srcv( (/jpr_ievp, jpr_sbpr, jpr_semp, jpr_oemp/) )%laction = .TRUE.
[3294]	455	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_emp%cldes' )
[1218]	456	END SELECT
[6140]	457	!
[1218]	458	! ! ------------------------- !
	459	! ! Runoffs & Calving !
	460	! ! ------------------------- !
[5407]	461	srcv(jpr_rnf )%clname = 'O_Runoff'
	462	IF( TRIM( sn_rcv_rnf%cldes ) == 'coupled' ) THEN
	463	srcv(jpr_rnf)%laction = .TRUE.
	464	l_rnfcpl = .TRUE. ! -> no need to read runoffs in sbcrnf
	465	ln_rnf = nn_components /= jp_iam_sas ! -> force to go through sbcrnf if not sas
	466	IF(lwp) WRITE(numout,*)
	467	IF(lwp) WRITE(numout,*) ' runoffs received from oasis -> force ln_rnf = ', ln_rnf
	468	ENDIF
	469	!
[7788]	470	srcv(jpr_cal)%clname = 'OCalving' ; IF( TRIM( sn_rcv_cal%cldes) == 'coupled' ) srcv(jpr_cal)%laction = .TRUE.
	471	srcv(jpr_isf)%clname = 'OIcshelf' ; IF( TRIM( sn_rcv_isf%cldes) == 'coupled' ) srcv(jpr_isf)%laction = .TRUE.
	472	srcv(jpr_icb)%clname = 'OIceberg' ; IF( TRIM( sn_rcv_icb%cldes) == 'coupled' ) srcv(jpr_icb)%laction = .TRUE.
	473
[12377]	474	IF( srcv(jpr_isf)%laction ) THEN
	475	l_isfoasis = .TRUE. ! -> isf fwf comes from oasis
[7788]	476	IF(lwp) WRITE(numout,*)
	477	IF(lwp) WRITE(numout,*) ' iceshelf received from oasis '
[12377]	478	CALL ctl_stop('STOP','not coded')
[7788]	479	ENDIF
[6140]	480	!
[1218]	481	! ! ------------------------- !
	482	! ! non solar radiation ! Qns
	483	! ! ------------------------- !
	484	srcv(jpr_qnsoce)%clname = 'O_QnsOce'
	485	srcv(jpr_qnsice)%clname = 'O_QnsIce'
	486	srcv(jpr_qnsmix)%clname = 'O_QnsMix'
[3294]	487	SELECT CASE( TRIM( sn_rcv_qns%cldes ) )
[5407]	488	CASE( 'none' ) ! nothing to do
[1218]	489	CASE( 'oce only' ) ; srcv( jpr_qnsoce )%laction = .TRUE.
	490	CASE( 'conservative' ) ; srcv( (/jpr_qnsice, jpr_qnsmix/) )%laction = .TRUE.
	491	CASE( 'oce and ice' ) ; srcv( (/jpr_qnsice, jpr_qnsoce/) )%laction = .TRUE.
	492	CASE( 'mixed oce-ice' ) ; srcv( jpr_qnsmix )%laction = .TRUE.
[3294]	493	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_qns%cldes' )
[1218]	494	END SELECT
[9019]	495	IF( TRIM( sn_rcv_qns%cldes ) == 'mixed oce-ice' .AND. nn_cats_cpl > 1 ) &
[3294]	496	CALL ctl_stop( 'sbc_cpl_init: sn_rcv_qns%cldes not currently allowed to be mixed oce-ice for multi-category ice' )
[9019]	497	!
[1218]	498	! ! ------------------------- !
	499	! ! solar radiation ! Qsr
	500	! ! ------------------------- !
	501	srcv(jpr_qsroce)%clname = 'O_QsrOce'
	502	srcv(jpr_qsrice)%clname = 'O_QsrIce'
	503	srcv(jpr_qsrmix)%clname = 'O_QsrMix'
[3294]	504	SELECT CASE( TRIM( sn_rcv_qsr%cldes ) )
[5407]	505	CASE( 'none' ) ! nothing to do
[1218]	506	CASE( 'oce only' ) ; srcv( jpr_qsroce )%laction = .TRUE.
	507	CASE( 'conservative' ) ; srcv( (/jpr_qsrice, jpr_qsrmix/) )%laction = .TRUE.
	508	CASE( 'oce and ice' ) ; srcv( (/jpr_qsrice, jpr_qsroce/) )%laction = .TRUE.
	509	CASE( 'mixed oce-ice' ) ; srcv( jpr_qsrmix )%laction = .TRUE.
[3294]	510	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_qsr%cldes' )
[1218]	511	END SELECT
[9019]	512	IF( TRIM( sn_rcv_qsr%cldes ) == 'mixed oce-ice' .AND. nn_cats_cpl > 1 ) &
[3294]	513	CALL ctl_stop( 'sbc_cpl_init: sn_rcv_qsr%cldes not currently allowed to be mixed oce-ice for multi-category ice' )
[9019]	514	!
[1218]	515	! ! ------------------------- !
	516	! ! non solar sensitivity ! d(Qns)/d(T)
	517	! ! ------------------------- !
	518	srcv(jpr_dqnsdt)%clname = 'O_dQnsdT'
[3294]	519	IF( TRIM( sn_rcv_dqnsdt%cldes ) == 'coupled' ) srcv(jpr_dqnsdt)%laction = .TRUE.
[1232]	520	!
	521	! non solar sensitivity mandatory for mixed oce-ice solar radiation coupling technique
[9019]	522	IF( TRIM( sn_rcv_dqnsdt%cldes ) == 'none' .AND. TRIM( sn_rcv_qns%cldes ) == 'mixed oce-ice' ) &
	523	& CALL ctl_stop( 'sbc_cpl_init: namsbc_cpl namelist mismatch between sn_rcv_qns%cldes and sn_rcv_dqnsdt%cldes' )
	524	!
[1218]	525	! ! ------------------------- !
	526	! ! 10m wind module !
	527	! ! ------------------------- !
[3294]	528	srcv(jpr_w10m)%clname = 'O_Wind10' ; IF( TRIM(sn_rcv_w10m%cldes ) == 'coupled' ) srcv(jpr_w10m)%laction = .TRUE.
[1696]	529	!
	530	! ! ------------------------- !
	531	! ! wind stress module !
	532	! ! ------------------------- !
[3294]	533	srcv(jpr_taum)%clname = 'O_TauMod' ; IF( TRIM(sn_rcv_taumod%cldes) == 'coupled' ) srcv(jpr_taum)%laction = .TRUE.
[9019]	534	!
[1534]	535	! ! ------------------------- !
	536	! ! Atmospheric CO2 !
	537	! ! ------------------------- !
[7646]	538	srcv(jpr_co2 )%clname = 'O_AtmCO2'
	539	IF( TRIM(sn_rcv_co2%cldes ) == 'coupled' ) THEN
	540	srcv(jpr_co2 )%laction = .TRUE.
	541	l_co2cpl = .TRUE.
	542	IF(lwp) WRITE(numout,*)
	543	IF(lwp) WRITE(numout,*) ' Atmospheric pco2 received from oasis '
	544	IF(lwp) WRITE(numout,*)
	545	ENDIF
[9019]	546	!
[7646]	547	! ! ------------------------- !
	548	! ! Mean Sea Level Pressure !
	549	! ! ------------------------- !
	550	srcv(jpr_mslp)%clname = 'O_MSLP' ; IF( TRIM(sn_rcv_mslp%cldes ) == 'coupled' ) srcv(jpr_mslp)%laction = .TRUE.
[9019]	551	!
[3294]	552	! ! ------------------------- !
[9019]	553	! ! ice topmelt and botmelt !
[3294]	554	! ! ------------------------- !
	555	srcv(jpr_topm )%clname = 'OTopMlt'
	556	srcv(jpr_botm )%clname = 'OBotMlt'
	557	IF( TRIM(sn_rcv_iceflx%cldes) == 'coupled' ) THEN
[12377]	558	IF( TRIM( sn_rcv_iceflx%clcat ) == 'yes' ) THEN
[9019]	559	srcv(jpr_topm:jpr_botm)%nct = nn_cats_cpl
[3294]	560	ELSE
	561	CALL ctl_stop( 'sbc_cpl_init: sn_rcv_iceflx%clcat should always be set to yes currently' )
	562	ENDIF
	563	srcv(jpr_topm:jpr_botm)%laction = .TRUE.
	564	ENDIF
[7646]	565	! ! ------------------------- !
[9019]	566	! ! ice skin temperature !
	567	! ! ------------------------- !
	568	srcv(jpr_ts_ice)%clname = 'OTsfIce' ! needed by Met Office
[12377]	569	IF( TRIM( sn_rcv_ts_ice%cldes ) == 'ice' ) srcv(jpr_ts_ice)%laction = .TRUE.
	570	IF( TRIM( sn_rcv_ts_ice%clcat ) == 'yes' ) srcv(jpr_ts_ice)%nct = nn_cats_cpl
	571	IF( TRIM( sn_rcv_emp%clcat ) == 'yes' ) srcv(jpr_ievp)%nct = nn_cats_cpl
[9019]	572
[12283]	573	#if defined key_si3
	574	IF( ln_cndflx .AND. .NOT.ln_cndemulate ) THEN
	575	IF( .NOT.srcv(jpr_ts_ice)%laction ) &
	576	& CALL ctl_stop( 'sbc_cpl_init: srcv(jpr_ts_ice)%laction should be set to true when ln_cndflx=T' )
	577	ENDIF
	578	#endif
[9019]	579	! ! ------------------------- !
[7646]	580	! ! Wave breaking !
	581	! ! ------------------------- !
	582	srcv(jpr_hsig)%clname = 'O_Hsigwa' ! significant wave height
	583	IF( TRIM(sn_rcv_hsig%cldes ) == 'coupled' ) THEN
	584	srcv(jpr_hsig)%laction = .TRUE.
	585	cpl_hsig = .TRUE.
	586	ENDIF
	587	srcv(jpr_phioc)%clname = 'O_PhiOce' ! wave to ocean energy
	588	IF( TRIM(sn_rcv_phioc%cldes ) == 'coupled' ) THEN
	589	srcv(jpr_phioc)%laction = .TRUE.
	590	cpl_phioc = .TRUE.
	591	ENDIF
	592	srcv(jpr_sdrftx)%clname = 'O_Sdrfx' ! Stokes drift in the u direction
	593	IF( TRIM(sn_rcv_sdrfx%cldes ) == 'coupled' ) THEN
	594	srcv(jpr_sdrftx)%laction = .TRUE.
	595	cpl_sdrftx = .TRUE.
	596	ENDIF
	597	srcv(jpr_sdrfty)%clname = 'O_Sdrfy' ! Stokes drift in the v direction
	598	IF( TRIM(sn_rcv_sdrfy%cldes ) == 'coupled' ) THEN
	599	srcv(jpr_sdrfty)%laction = .TRUE.
	600	cpl_sdrfty = .TRUE.
	601	ENDIF
	602	srcv(jpr_wper)%clname = 'O_WPer' ! mean wave period
	603	IF( TRIM(sn_rcv_wper%cldes ) == 'coupled' ) THEN
	604	srcv(jpr_wper)%laction = .TRUE.
	605	cpl_wper = .TRUE.
	606	ENDIF
[9023]	607	srcv(jpr_wfreq)%clname = 'O_WFreq' ! wave peak frequency
	608	IF( TRIM(sn_rcv_wfreq%cldes ) == 'coupled' ) THEN
	609	srcv(jpr_wfreq)%laction = .TRUE.
	610	cpl_wfreq = .TRUE.
	611	ENDIF
[7646]	612	srcv(jpr_wnum)%clname = 'O_WNum' ! mean wave number
	613	IF( TRIM(sn_rcv_wnum%cldes ) == 'coupled' ) THEN
	614	srcv(jpr_wnum)%laction = .TRUE.
	615	cpl_wnum = .TRUE.
	616	ENDIF
[9034]	617	srcv(jpr_tauwoc)%clname = 'O_TauOce' ! stress fraction adsorbed by the wave
[9033]	618	IF( TRIM(sn_rcv_tauwoc%cldes ) == 'coupled' ) THEN
	619	srcv(jpr_tauwoc)%laction = .TRUE.
	620	cpl_tauwoc = .TRUE.
[7646]	621	ENDIF
[9023]	622	srcv(jpr_tauwx)%clname = 'O_Tauwx' ! ocean stress from wave in the x direction
	623	srcv(jpr_tauwy)%clname = 'O_Tauwy' ! ocean stress from wave in the y direction
	624	IF( TRIM(sn_rcv_tauw%cldes ) == 'coupled' ) THEN
	625	srcv(jpr_tauwx)%laction = .TRUE.
	626	srcv(jpr_tauwy)%laction = .TRUE.
	627	cpl_tauw = .TRUE.
	628	ENDIF
[7646]	629	srcv(jpr_wdrag)%clname = 'O_WDrag' ! neutral surface drag coefficient
	630	IF( TRIM(sn_rcv_wdrag%cldes ) == 'coupled' ) THEN
	631	srcv(jpr_wdrag)%laction = .TRUE.
	632	cpl_wdrag = .TRUE.
	633	ENDIF
[9033]	634	IF( srcv(jpr_tauwoc)%laction .AND. srcv(jpr_tauwx)%laction .AND. srcv(jpr_tauwy)%laction ) &
[9023]	635	CALL ctl_stop( 'More than one method for modifying the ocean stress has been selected ', &
[9033]	636	'(sn_rcv_tauwoc=coupled and sn_rcv_tauw=coupled)' )
[9023]	637	!
[5407]	638	! ! ------------------------------- !
	639	! ! OPA-SAS coupling - rcv by opa !
	640	! ! ------------------------------- !
	641	srcv(jpr_sflx)%clname = 'O_SFLX'
	642	srcv(jpr_fice)%clname = 'RIceFrc'
	643	!
	644	IF( nn_components == jp_iam_opa ) THEN ! OPA coupled to SAS via OASIS: force received field by OPA (sent by SAS)
	645	srcv(:)%laction = .FALSE. ! force default definition in case of opa <-> sas coupling
	646	srcv(:)%clgrid = 'T' ! force default definition in case of opa <-> sas coupling
	647	srcv(:)%nsgn = 1. ! force default definition in case of opa <-> sas coupling
	648	srcv( (/jpr_qsroce, jpr_qnsoce, jpr_oemp, jpr_sflx, jpr_fice, jpr_otx1, jpr_oty1, jpr_taum/) )%laction = .TRUE.
	649	srcv(jpr_otx1)%clgrid = 'U' ! oce components given at U-point
	650	srcv(jpr_oty1)%clgrid = 'V' ! and V-point
	651	! Vectors: change of sign at north fold ONLY if on the local grid
	652	srcv( (/jpr_otx1,jpr_oty1/) )%nsgn = -1.
	653	sn_rcv_tau%clvgrd = 'U,V'
	654	sn_rcv_tau%clvor = 'local grid'
	655	sn_rcv_tau%clvref = 'spherical'
	656	sn_rcv_emp%cldes = 'oce only'
	657	!
	658	IF(lwp) THEN ! control print
	659	WRITE(numout,*)
	660	WRITE(numout,*)' Special conditions for SAS-OPA coupling '
	661	WRITE(numout,*)' OPA component '
	662	WRITE(numout,*)
	663	WRITE(numout,*)' received fields from SAS component '
	664	WRITE(numout,*)' ice cover '
	665	WRITE(numout,*)' oce only EMP '
	666	WRITE(numout,*)' salt flux '
	667	WRITE(numout,*)' mixed oce-ice solar flux '
	668	WRITE(numout,*)' mixed oce-ice non solar flux '
	669	WRITE(numout,*)' wind stress U,V on local grid and sperical coordinates '
	670	WRITE(numout,*)' wind stress module'
	671	WRITE(numout,*)
	672	ENDIF
	673	ENDIF
	674	! ! -------------------------------- !
	675	! ! OPA-SAS coupling - rcv by sas !
	676	! ! -------------------------------- !
	677	srcv(jpr_toce )%clname = 'I_SSTSST'
	678	srcv(jpr_soce )%clname = 'I_SSSal'
	679	srcv(jpr_ocx1 )%clname = 'I_OCurx1'
	680	srcv(jpr_ocy1 )%clname = 'I_OCury1'
	681	srcv(jpr_ssh )%clname = 'I_SSHght'
	682	srcv(jpr_e3t1st)%clname = 'I_E3T1st'
	683	srcv(jpr_fraqsr)%clname = 'I_FraQsr'
	684	!
	685	IF( nn_components == jp_iam_sas ) THEN
	686	IF( .NOT. ln_cpl ) srcv(:)%laction = .FALSE. ! force default definition in case of opa <-> sas coupling
	687	IF( .NOT. ln_cpl ) srcv(:)%clgrid = 'T' ! force default definition in case of opa <-> sas coupling
	688	IF( .NOT. ln_cpl ) srcv(:)%nsgn = 1. ! force default definition in case of opa <-> sas coupling
	689	srcv( (/jpr_toce, jpr_soce, jpr_ssh, jpr_fraqsr, jpr_ocx1, jpr_ocy1/) )%laction = .TRUE.
[6140]	690	srcv( jpr_e3t1st )%laction = .NOT.ln_linssh
[5407]	691	srcv(jpr_ocx1)%clgrid = 'U' ! oce components given at U-point
	692	srcv(jpr_ocy1)%clgrid = 'V' ! and V-point
	693	! Vectors: change of sign at north fold ONLY if on the local grid
	694	srcv(jpr_ocx1:jpr_ocy1)%nsgn = -1.
	695	! Change first letter to couple with atmosphere if already coupled OPA
	696	! this is nedeed as each variable name used in the namcouple must be unique:
	697	! for example O_Runoff received by OPA from SAS and therefore O_Runoff received by SAS from the Atmosphere
	698	DO jn = 1, jprcv
[12377]	699	IF( srcv(jn)%clname(1:1) == "O" ) srcv(jn)%clname = "S"//srcv(jn)%clname(2:LEN(srcv(jn)%clname))
[5407]	700	END DO
	701	!
	702	IF(lwp) THEN ! control print
	703	WRITE(numout,*)
	704	WRITE(numout,*)' Special conditions for SAS-OPA coupling '
	705	WRITE(numout,*)' SAS component '
	706	WRITE(numout,*)
	707	IF( .NOT. ln_cpl ) THEN
	708	WRITE(numout,*)' received fields from OPA component '
	709	ELSE
	710	WRITE(numout,*)' Additional received fields from OPA component : '
	711	ENDIF
[7646]	712	WRITE(numout,*)' sea surface temperature (Celsius) '
[5407]	713	WRITE(numout,*)' sea surface salinity '
	714	WRITE(numout,*)' surface currents '
	715	WRITE(numout,*)' sea surface height '
	716	WRITE(numout,*)' thickness of first ocean T level '
	717	WRITE(numout,*)' fraction of solar net radiation absorbed in the first ocean level'
	718	WRITE(numout,*)
	719	ENDIF
	720	ENDIF
	721
	722	! =================================================== !
	723	! Allocate all parts of frcv used for received fields !
	724	! =================================================== !
[3294]	725	DO jn = 1, jprcv
[12377]	726	IF( srcv(jn)%laction ) ALLOCATE( frcv(jn)%z3(jpi,jpj,srcv(jn)%nct) )
[3294]	727	END DO
	728	! Allocate taum part of frcv which is used even when not received as coupling field
[12377]	729	IF( .NOT. srcv(jpr_taum)%laction ) ALLOCATE( frcv(jpr_taum)%z3(jpi,jpj,srcv(jpr_taum)%nct) )
[5407]	730	! Allocate w10m part of frcv which is used even when not received as coupling field
[12377]	731	IF( .NOT. srcv(jpr_w10m)%laction ) ALLOCATE( frcv(jpr_w10m)%z3(jpi,jpj,srcv(jpr_w10m)%nct) )
[5407]	732	! Allocate jpr_otx1 part of frcv which is used even when not received as coupling field
[12377]	733	IF( .NOT. srcv(jpr_otx1)%laction ) ALLOCATE( frcv(jpr_otx1)%z3(jpi,jpj,srcv(jpr_otx1)%nct) )
	734	IF( .NOT. srcv(jpr_oty1)%laction ) ALLOCATE( frcv(jpr_oty1)%z3(jpi,jpj,srcv(jpr_oty1)%nct) )
[4162]	735	! Allocate itx1 and ity1 as they are used in sbc_cpl_ice_tau even if srcv(jpr_itx1)%laction = .FALSE.
	736	IF( k_ice /= 0 ) THEN
[12377]	737	IF( .NOT. srcv(jpr_itx1)%laction ) ALLOCATE( frcv(jpr_itx1)%z3(jpi,jpj,srcv(jpr_itx1)%nct) )
	738	IF( .NOT. srcv(jpr_ity1)%laction ) ALLOCATE( frcv(jpr_ity1)%z3(jpi,jpj,srcv(jpr_ity1)%nct) )
	739	ENDIF
[3294]	740
[1218]	741	! ================================ !
	742	! Define the send interface !
	743	! ================================ !
[3294]	744	! for each field: define the OASIS name (ssnd(:)%clname)
	745	! define send or not from the namelist parameters (ssnd(:)%laction)
	746	! define the north fold type of lbc (ssnd(:)%nsgn)
[1218]	747
	748	! default definitions of nsnd
[3294]	749	ssnd(:)%laction = .FALSE. ; ssnd(:)%clgrid = 'T' ; ssnd(:)%nsgn = 1. ; ssnd(:)%nct = 1
[1218]	750
	751	! ! ------------------------- !
	752	! ! Surface temperature !
	753	! ! ------------------------- !
[9019]	754	ssnd(jps_toce)%clname = 'O_SSTSST'
	755	ssnd(jps_tice)%clname = 'O_TepIce'
	756	ssnd(jps_ttilyr)%clname = 'O_TtiLyr'
	757	ssnd(jps_tmix)%clname = 'O_TepMix'
[3294]	758	SELECT CASE( TRIM( sn_snd_temp%cldes ) )
[5410]	759	CASE( 'none' ) ! nothing to do
	760	CASE( 'oce only' ) ; ssnd( jps_toce )%laction = .TRUE.
[9019]	761	CASE( 'oce and ice' , 'weighted oce and ice' , 'oce and weighted ice' )
[3294]	762	ssnd( (/jps_toce, jps_tice/) )%laction = .TRUE.
[12377]	763	IF( TRIM( sn_snd_temp%clcat ) == 'yes' ) ssnd(jps_tice)%nct = nn_cats_cpl
[5410]	764	CASE( 'mixed oce-ice' ) ; ssnd( jps_tmix )%laction = .TRUE.
[3294]	765	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_temp%cldes' )
[1218]	766	END SELECT
[5407]	767
[1218]	768	! ! ------------------------- !
	769	! ! Albedo !
	770	! ! ------------------------- !
	771	ssnd(jps_albice)%clname = 'O_AlbIce'
	772	ssnd(jps_albmix)%clname = 'O_AlbMix'
[3294]	773	SELECT CASE( TRIM( sn_snd_alb%cldes ) )
[5410]	774	CASE( 'none' ) ! nothing to do
	775	CASE( 'ice' , 'weighted ice' ) ; ssnd(jps_albice)%laction = .TRUE.
	776	CASE( 'mixed oce-ice' ) ; ssnd(jps_albmix)%laction = .TRUE.
[3294]	777	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_alb%cldes' )
[1218]	778	END SELECT
[1232]	779	!
	780	! Need to calculate oceanic albedo if
	781	! 1. sending mixed oce-ice albedo or
	782	! 2. receiving mixed oce-ice solar radiation
[12377]	783	IF( TRIM ( sn_snd_alb%cldes ) == 'mixed oce-ice' .OR. TRIM ( sn_rcv_qsr%cldes ) == 'mixed oce-ice' ) THEN
[9019]	784	CALL oce_alb( zaos, zacs )
[1308]	785	! Due to lack of information on nebulosity : mean clear/overcast sky
[9019]	786	alb_oce_mix(:,:) = ( zacs(:,:) + zaos(:,:) ) * 0.5
[1232]	787	ENDIF
[1218]	788	! ! ------------------------- !
	789	! ! Ice fraction & Thickness !
	790	! ! ------------------------- !
[9019]	791	ssnd(jps_fice)%clname = 'OIceFrc'
[7646]	792	ssnd(jps_ficet)%clname = 'OIceFrcT'
[9019]	793	ssnd(jps_hice)%clname = 'OIceTck'
	794	ssnd(jps_a_p)%clname = 'OPndFrc'
	795	ssnd(jps_ht_p)%clname = 'OPndTck'
	796	ssnd(jps_hsnw)%clname = 'OSnwTck'
	797	ssnd(jps_fice1)%clname = 'OIceFrd'
[3294]	798	IF( k_ice /= 0 ) THEN
[9019]	799	ssnd(jps_fice)%laction = .TRUE. ! if ice treated in the ocean (even in climato case)
	800	ssnd(jps_fice1)%laction = .TRUE. ! First-order regridded ice concentration, to be used producing atmos-to-ice fluxes (Met Office requirement)
[3294]	801	! Currently no namelist entry to determine sending of multi-category ice fraction so use the thickness entry for now
[12377]	802	IF( TRIM( sn_snd_thick%clcat ) == 'yes' ) ssnd(jps_fice)%nct = nn_cats_cpl
	803	IF( TRIM( sn_snd_thick1%clcat ) == 'yes' ) ssnd(jps_fice1)%nct = nn_cats_cpl
[3294]	804	ENDIF
[5407]	805
[12377]	806	IF(TRIM( sn_snd_ifrac%cldes ) == 'coupled') ssnd(jps_ficet)%laction = .TRUE.
[7646]	807
[3294]	808	SELECT CASE ( TRIM( sn_snd_thick%cldes ) )
[3680]	809	CASE( 'none' ) ! nothing to do
	810	CASE( 'ice and snow' )
[3294]	811	ssnd(jps_hice:jps_hsnw)%laction = .TRUE.
[12377]	812	IF( TRIM( sn_snd_thick%clcat ) == 'yes' ) THEN
[9019]	813	ssnd(jps_hice:jps_hsnw)%nct = nn_cats_cpl
[3294]	814	ENDIF
	815	CASE ( 'weighted ice and snow' )
	816	ssnd(jps_hice:jps_hsnw)%laction = .TRUE.
[12377]	817	IF( TRIM( sn_snd_thick%clcat ) == 'yes' ) ssnd(jps_hice:jps_hsnw)%nct = nn_cats_cpl
[3294]	818	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_thick%cldes' )
	819	END SELECT
	820
[9019]	821	! ! ------------------------- !
	822	! ! Ice Meltponds !
	823	! ! ------------------------- !
	824	! Needed by Met Office
	825	ssnd(jps_a_p)%clname = 'OPndFrc'
	826	ssnd(jps_ht_p)%clname = 'OPndTck'
	827	SELECT CASE ( TRIM( sn_snd_mpnd%cldes ) )
	828	CASE ( 'none' )
	829	ssnd(jps_a_p)%laction = .FALSE.
	830	ssnd(jps_ht_p)%laction = .FALSE.
	831	CASE ( 'ice only' )
	832	ssnd(jps_a_p)%laction = .TRUE.
	833	ssnd(jps_ht_p)%laction = .TRUE.
[12377]	834	IF( TRIM( sn_snd_mpnd%clcat ) == 'yes' ) THEN
[9019]	835	ssnd(jps_a_p)%nct = nn_cats_cpl
	836	ssnd(jps_ht_p)%nct = nn_cats_cpl
	837	ELSE
[12377]	838	IF( nn_cats_cpl > 1 ) THEN
[9019]	839	CALL ctl_stop( 'sbc_cpl_init: use weighted ice option for sn_snd_mpnd%cldes if not exchanging category fields' )
	840	ENDIF
	841	ENDIF
	842	CASE ( 'weighted ice' )
	843	ssnd(jps_a_p)%laction = .TRUE.
	844	ssnd(jps_ht_p)%laction = .TRUE.
[12377]	845	IF( TRIM( sn_snd_mpnd%clcat ) == 'yes' ) THEN
[9019]	846	ssnd(jps_a_p)%nct = nn_cats_cpl
	847	ssnd(jps_ht_p)%nct = nn_cats_cpl
	848	ENDIF
	849	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_mpnd%cldes; '//sn_snd_mpnd%cldes )
	850	END SELECT
	851
[1218]	852	! ! ------------------------- !
	853	! ! Surface current !
	854	! ! ------------------------- !
	855	! ocean currents ! ice velocities
	856	ssnd(jps_ocx1)%clname = 'O_OCurx1' ; ssnd(jps_ivx1)%clname = 'O_IVelx1'
	857	ssnd(jps_ocy1)%clname = 'O_OCury1' ; ssnd(jps_ivy1)%clname = 'O_IVely1'
	858	ssnd(jps_ocz1)%clname = 'O_OCurz1' ; ssnd(jps_ivz1)%clname = 'O_IVelz1'
[7646]	859	ssnd(jps_ocxw)%clname = 'O_OCurxw'
	860	ssnd(jps_ocyw)%clname = 'O_OCuryw'
[1218]	861	!
[2090]	862	ssnd(jps_ocx1:jps_ivz1)%nsgn = -1. ! vectors: change of the sign at the north fold
[1218]	863
[3294]	864	IF( sn_snd_crt%clvgrd == 'U,V' ) THEN
	865	ssnd(jps_ocx1)%clgrid = 'U' ; ssnd(jps_ocy1)%clgrid = 'V'
	866	ELSE IF( sn_snd_crt%clvgrd /= 'T' ) THEN
	867	CALL ctl_stop( 'sn_snd_crt%clvgrd must be equal to T' )
	868	ENDIF
[1226]	869	ssnd(jps_ocx1:jps_ivz1)%laction = .TRUE. ! default: all are send
[3294]	870	IF( TRIM( sn_snd_crt%clvref ) == 'spherical' ) ssnd( (/jps_ocz1, jps_ivz1/) )%laction = .FALSE.
	871	IF( TRIM( sn_snd_crt%clvor ) == 'eastward-northward' ) ssnd(jps_ocx1:jps_ivz1)%nsgn = 1.
	872	SELECT CASE( TRIM( sn_snd_crt%cldes ) )
[1226]	873	CASE( 'none' ) ; ssnd(jps_ocx1:jps_ivz1)%laction = .FALSE.
	874	CASE( 'oce only' ) ; ssnd(jps_ivx1:jps_ivz1)%laction = .FALSE.
[1218]	875	CASE( 'weighted oce and ice' ) ! nothing to do
[1226]	876	CASE( 'mixed oce-ice' ) ; ssnd(jps_ivx1:jps_ivz1)%laction = .FALSE.
[3294]	877	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_crt%cldes' )
[1218]	878	END SELECT
	879
[7646]	880	ssnd(jps_ocxw:jps_ocyw)%nsgn = -1. ! vectors: change of the sign at the north fold
	881
	882	IF( sn_snd_crtw%clvgrd == 'U,V' ) THEN
	883	ssnd(jps_ocxw)%clgrid = 'U' ; ssnd(jps_ocyw)%clgrid = 'V'
	884	ELSE IF( sn_snd_crtw%clvgrd /= 'T' ) THEN
	885	CALL ctl_stop( 'sn_snd_crtw%clvgrd must be equal to T' )
	886	ENDIF
	887	IF( TRIM( sn_snd_crtw%clvor ) == 'eastward-northward' ) ssnd(jps_ocxw:jps_ocyw)%nsgn = 1.
	888	SELECT CASE( TRIM( sn_snd_crtw%cldes ) )
	889	CASE( 'none' ) ; ssnd(jps_ocxw:jps_ocyw)%laction = .FALSE.
	890	CASE( 'oce only' ) ; ssnd(jps_ocxw:jps_ocyw)%laction = .TRUE.
	891	CASE( 'weighted oce and ice' ) ! nothing to do
	892	CASE( 'mixed oce-ice' ) ; ssnd(jps_ivx1:jps_ivz1)%laction = .FALSE.
	893	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_crtw%cldes' )
	894	END SELECT
	895
[1534]	896	! ! ------------------------- !
	897	! ! CO2 flux !
	898	! ! ------------------------- !
[3294]	899	ssnd(jps_co2)%clname = 'O_CO2FLX' ; IF( TRIM(sn_snd_co2%cldes) == 'coupled' ) ssnd(jps_co2 )%laction = .TRUE.
[9019]	900	!
	901	! ! ------------------------- !
	902	! ! Sea surface freezing temp !
	903	! ! ------------------------- !
	904	! needed by Met Office
	905	ssnd(jps_sstfrz)%clname = 'O_SSTFrz' ; IF( TRIM(sn_snd_sstfrz%cldes) == 'coupled' ) ssnd(jps_sstfrz)%laction = .TRUE.
	906	!
	907	! ! ------------------------- !
	908	! ! Ice conductivity !
	909	! ! ------------------------- !
	910	! needed by Met Office
	911	! Note that ultimately we will move to passing an ocean effective conductivity as well so there
	912	! will be some changes to the parts of the code which currently relate only to ice conductivity
	913	ssnd(jps_ttilyr )%clname = 'O_TtiLyr'
	914	SELECT CASE ( TRIM( sn_snd_ttilyr%cldes ) )
	915	CASE ( 'none' )
	916	ssnd(jps_ttilyr)%laction = .FALSE.
	917	CASE ( 'ice only' )
	918	ssnd(jps_ttilyr)%laction = .TRUE.
[12377]	919	IF( TRIM( sn_snd_ttilyr%clcat ) == 'yes' ) THEN
[9019]	920	ssnd(jps_ttilyr)%nct = nn_cats_cpl
	921	ELSE
[12377]	922	IF( nn_cats_cpl > 1 ) THEN
[9019]	923	CALL ctl_stop( 'sbc_cpl_init: use weighted ice option for sn_snd_ttilyr%cldes if not exchanging category fields' )
	924	ENDIF
	925	ENDIF
	926	CASE ( 'weighted ice' )
	927	ssnd(jps_ttilyr)%laction = .TRUE.
[12377]	928	IF( TRIM( sn_snd_ttilyr%clcat ) == 'yes' ) ssnd(jps_ttilyr)%nct = nn_cats_cpl
[9019]	929	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_ttilyr%cldes;'//sn_snd_ttilyr%cldes )
	930	END SELECT
[5407]	931
[9019]	932	ssnd(jps_kice )%clname = 'OIceKn'
	933	SELECT CASE ( TRIM( sn_snd_cond%cldes ) )
	934	CASE ( 'none' )
	935	ssnd(jps_kice)%laction = .FALSE.
	936	CASE ( 'ice only' )
	937	ssnd(jps_kice)%laction = .TRUE.
[12377]	938	IF( TRIM( sn_snd_cond%clcat ) == 'yes' ) THEN
[9019]	939	ssnd(jps_kice)%nct = nn_cats_cpl
	940	ELSE
[12377]	941	IF( nn_cats_cpl > 1 ) THEN
[9019]	942	CALL ctl_stop( 'sbc_cpl_init: use weighted ice option for sn_snd_cond%cldes if not exchanging category fields' )
	943	ENDIF
	944	ENDIF
	945	CASE ( 'weighted ice' )
	946	ssnd(jps_kice)%laction = .TRUE.
[12377]	947	IF( TRIM( sn_snd_cond%clcat ) == 'yes' ) ssnd(jps_kice)%nct = nn_cats_cpl
[9019]	948	CASE default ; CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_cond%cldes;'//sn_snd_cond%cldes )
	949	END SELECT
	950	!
[7646]	951	! ! ------------------------- !
	952	! ! Sea surface height !
	953	! ! ------------------------- !
	954	ssnd(jps_wlev)%clname = 'O_Wlevel' ; IF( TRIM(sn_snd_wlev%cldes) == 'coupled' ) ssnd(jps_wlev)%laction = .TRUE.
	955
[5407]	956	! ! ------------------------------- !
	957	! ! OPA-SAS coupling - snd by opa !
	958	! ! ------------------------------- !
	959	ssnd(jps_ssh )%clname = 'O_SSHght'
	960	ssnd(jps_soce )%clname = 'O_SSSal'
	961	ssnd(jps_e3t1st)%clname = 'O_E3T1st'
	962	ssnd(jps_fraqsr)%clname = 'O_FraQsr'
[1534]	963	!
[5407]	964	IF( nn_components == jp_iam_opa ) THEN
	965	ssnd(:)%laction = .FALSE. ! force default definition in case of opa <-> sas coupling
	966	ssnd( (/jps_toce, jps_soce, jps_ssh, jps_fraqsr, jps_ocx1, jps_ocy1/) )%laction = .TRUE.
[6140]	967	ssnd( jps_e3t1st )%laction = .NOT.ln_linssh
[5407]	968	! vector definition: not used but cleaner...
	969	ssnd(jps_ocx1)%clgrid = 'U' ! oce components given at U-point
	970	ssnd(jps_ocy1)%clgrid = 'V' ! and V-point
	971	sn_snd_crt%clvgrd = 'U,V'
	972	sn_snd_crt%clvor = 'local grid'
	973	sn_snd_crt%clvref = 'spherical'
	974	!
	975	IF(lwp) THEN ! control print
	976	WRITE(numout,*)
	977	WRITE(numout,*)' sent fields to SAS component '
[7646]	978	WRITE(numout,*)' sea surface temperature (T before, Celsius) '
[5407]	979	WRITE(numout,*)' sea surface salinity '
	980	WRITE(numout,*)' surface currents U,V on local grid and spherical coordinates'
	981	WRITE(numout,*)' sea surface height '
	982	WRITE(numout,*)' thickness of first ocean T level '
	983	WRITE(numout,*)' fraction of solar net radiation absorbed in the first ocean level'
	984	WRITE(numout,*)
	985	ENDIF
	986	ENDIF
	987	! ! ------------------------------- !
	988	! ! OPA-SAS coupling - snd by sas !
	989	! ! ------------------------------- !
	990	ssnd(jps_sflx )%clname = 'I_SFLX'
	991	ssnd(jps_fice2 )%clname = 'IIceFrc'
	992	ssnd(jps_qsroce)%clname = 'I_QsrOce'
	993	ssnd(jps_qnsoce)%clname = 'I_QnsOce'
	994	ssnd(jps_oemp )%clname = 'IOEvaMPr'
	995	ssnd(jps_otx1 )%clname = 'I_OTaux1'
	996	ssnd(jps_oty1 )%clname = 'I_OTauy1'
	997	ssnd(jps_rnf )%clname = 'I_Runoff'
	998	ssnd(jps_taum )%clname = 'I_TauMod'
	999	!
	1000	IF( nn_components == jp_iam_sas ) THEN
	1001	IF( .NOT. ln_cpl ) ssnd(:)%laction = .FALSE. ! force default definition in case of opa <-> sas coupling
	1002	ssnd( (/jps_qsroce, jps_qnsoce, jps_oemp, jps_fice2, jps_sflx, jps_otx1, jps_oty1, jps_taum/) )%laction = .TRUE.
	1003	!
	1004	! Change first letter to couple with atmosphere if already coupled with sea_ice
	1005	! this is nedeed as each variable name used in the namcouple must be unique:
	1006	! for example O_SSTSST sent by OPA to SAS and therefore S_SSTSST sent by SAS to the Atmosphere
	1007	DO jn = 1, jpsnd
[12377]	1008	IF( ssnd(jn)%clname(1:1) == "O" ) ssnd(jn)%clname = "S"//ssnd(jn)%clname(2:LEN(ssnd(jn)%clname))
[5407]	1009	END DO
	1010	!
	1011	IF(lwp) THEN ! control print
	1012	WRITE(numout,*)
	1013	IF( .NOT. ln_cpl ) THEN
	1014	WRITE(numout,*)' sent fields to OPA component '
	1015	ELSE
	1016	WRITE(numout,*)' Additional sent fields to OPA component : '
	1017	ENDIF
	1018	WRITE(numout,*)' ice cover '
	1019	WRITE(numout,*)' oce only EMP '
	1020	WRITE(numout,*)' salt flux '
	1021	WRITE(numout,*)' mixed oce-ice solar flux '
	1022	WRITE(numout,*)' mixed oce-ice non solar flux '
	1023	WRITE(numout,*)' wind stress U,V components'
	1024	WRITE(numout,*)' wind stress module'
	1025	ENDIF
	1026	ENDIF
	1027
	1028	!
[1218]	1029	! ================================ !
	1030	! initialisation of the coupler !
	1031	! ================================ !
[1226]	1032
[5407]	1033	CALL cpl_define(jprcv, jpsnd, nn_cplmodel)
	1034
[12377]	1035	IF(ln_usecplmask) THEN
[4990]	1036	xcplmask(:,:,:) = 0.
	1037	CALL iom_open( 'cplmask', inum )
	1038	CALL iom_get( inum, jpdom_unknown, 'cplmask', xcplmask(1:nlci,1:nlcj,1:nn_cplmodel), &
	1039	& kstart = (/ mig(1),mjg(1),1 /), kcount = (/ nlci,nlcj,nn_cplmodel /) )
	1040	CALL iom_close( inum )
	1041	ELSE
	1042	xcplmask(:,:,:) = 1.
	1043	ENDIF
[5407]	1044	xcplmask(:,:,0) = 1. - SUM( xcplmask(:,:,1:nn_cplmodel), dim = 3 )
[1218]	1045	!
	1046	END SUBROUTINE sbc_cpl_init
	1047
	1048
[12377]	1049	SUBROUTINE sbc_cpl_rcv( kt, k_fsbc, k_ice, Kbb, Kmm )
[1218]	1050	!!----------------------------------------------------------------------
	1051	!! * ROUTINE sbc_cpl_rcv *
[888]	1052	!!
[1218]	1053	!! ** Purpose : provide the stress over the ocean and, if no sea-ice,
	1054	!! provide the ocean heat and freshwater fluxes.
[888]	1055	!!
[1218]	1056	!! ** Method : - Receive all the atmospheric fields (stored in frcv array). called at each time step.
	1057	!! OASIS controls if there is something do receive or not. nrcvinfo contains the info
	1058	!! to know if the field was really received or not
[888]	1059	!!
[1218]	1060	!! --> If ocean stress was really received:
[888]	1061	!!
[1218]	1062	!! - transform the received ocean stress vector from the received
	1063	!! referential and grid into an atmosphere-ocean stress in
	1064	!! the (i,j) ocean referencial and at the ocean velocity point.
	1065	!! The received stress are :
	1066	!! - defined by 3 components (if cartesian coordinate)
	1067	!! or by 2 components (if spherical)
	1068	!! - oriented along geographical coordinate (if eastward-northward)
	1069	!! or along the local grid coordinate (if local grid)
	1070	!! - given at U- and V-point, resp. if received on 2 grids
	1071	!! or at T-point if received on 1 grid
	1072	!! Therefore and if necessary, they are successively
	1073	!! processed in order to obtain them
	1074	!! first as 2 components on the sphere
	1075	!! second as 2 components oriented along the local grid
	1076	!! third as 2 components on the U,V grid
[888]	1077	!!
[1218]	1078	!! -->
[888]	1079	!!
[1218]	1080	!! - In 'ocean only' case, non solar and solar ocean heat fluxes
	1081	!! and total ocean freshwater fluxes
	1082	!!
	1083	!! ** Method : receive all fields from the atmosphere and transform
	1084	!! them into ocean surface boundary condition fields
	1085	!!
	1086	!! ** Action : update utau, vtau ocean stress at U,V grid
[4990]	1087	!! taum wind stress module at T-point
	1088	!! wndm wind speed module at T-point over free ocean or leads in presence of sea-ice
[3625]	1089	!! qns non solar heat fluxes including emp heat content (ocean only case)
	1090	!! and the latent heat flux of solid precip. melting
	1091	!! qsr solar ocean heat fluxes (ocean only case)
	1092	!! emp upward mass flux [evap. - precip. (- runoffs) (- calving)] (ocean only case)
[888]	1093	!!----------------------------------------------------------------------
[9019]	1094	USE zdf_oce, ONLY : ln_zdfswm
	1095	!
	1096	INTEGER, INTENT(in) :: kt ! ocean model time step index
	1097	INTEGER, INTENT(in) :: k_fsbc ! frequency of sbc (-> ice model) computation
	1098	INTEGER, INTENT(in) :: k_ice ! ice management in the sbc (=0/1/2/3)
[12377]	1099	INTEGER, INTENT(in) :: Kbb, Kmm ! ocean model time level indices
[888]	1100	!!
[5407]	1101	LOGICAL :: llnewtx, llnewtau ! update wind stress components and module??
[1218]	1102	INTEGER :: ji, jj, jn ! dummy loop indices
[6140]	1103	INTEGER :: isec ! number of seconds since nit000 (assuming rdt did not change since nit000)
[1218]	1104	REAL(wp) :: zcumulneg, zcumulpos ! temporary scalars
[1226]	1105	REAL(wp) :: zcoef ! temporary scalar
[1695]	1106	REAL(wp) :: zrhoa = 1.22 ! Air density kg/m3
	1107	REAL(wp) :: zcdrag = 1.5e-3 ! drag coefficient
	1108	REAL(wp) :: zzx, zzy ! temporary variables
[9019]	1109	REAL(wp), DIMENSION(jpi,jpj) :: ztx, zty, zmsk, zemp, zqns, zqsr
[1218]	1110	!!----------------------------------------------------------------------
[3294]	1111	!
[12283]	1112	IF( kt == nit000 ) THEN
	1113	! cannot be done in the init phase when we use agrif as cpl_freq requires that oasis_enddef is done
	1114	ncpl_qsr_freq = cpl_freq( 'O_QsrOce' ) + cpl_freq( 'O_QsrMix' ) + cpl_freq( 'I_QsrOce' ) + cpl_freq( 'I_QsrMix' )
	1115	IF( ln_dm2dc .AND. ncpl_qsr_freq /= 86400 ) &
	1116	& CALL ctl_stop( 'sbc_cpl_rcv: diurnal cycle reconstruction (ln_dm2dc) needs daily couping for solar radiation' )
	1117	ncpl_qsr_freq = 86400 / ncpl_qsr_freq ! used by top
	1118	ENDIF
	1119	!
[5407]	1120	IF( ln_mixcpl ) zmsk(:,:) = 1. - xcplmask(:,:,0)
	1121	!
	1122	! ! ======================================================= !
	1123	! ! Receive all the atmos. fields (including ice information)
	1124	! ! ======================================================= !
[12489]	1125	isec = ( kt - nit000 ) * NINT( rn_Dt ) ! date of exchanges
[5407]	1126	DO jn = 1, jprcv ! received fields sent by the atmosphere
	1127	IF( srcv(jn)%laction ) CALL cpl_rcv( jn, isec, frcv(jn)%z3, xcplmask(:,:,1:nn_cplmodel), nrcvinfo(jn) )
[1218]	1128	END DO
[888]	1129
[1218]	1130	! ! ========================= !
[1696]	1131	IF( srcv(jpr_otx1)%laction ) THEN ! ocean stress components !
[1218]	1132	! ! ========================= !
[3294]	1133	! define frcv(jpr_otx1)%z3(:,:,1) and frcv(jpr_oty1)%z3(:,:,1): stress at U/V point along model grid
[1218]	1134	! => need to be done only when we receive the field
[1698]	1135	IF( nrcvinfo(jpr_otx1) == OASIS_Rcv ) THEN
[1218]	1136	!
[3294]	1137	IF( TRIM( sn_rcv_tau%clvref ) == 'cartesian' ) THEN ! 2 components on the sphere
[1218]	1138	! ! (cartesian to spherical -> 3 to 2 components)
	1139	!
[3294]	1140	CALL geo2oce( frcv(jpr_otx1)%z3(:,:,1), frcv(jpr_oty1)%z3(:,:,1), frcv(jpr_otz1)%z3(:,:,1), &
[1218]	1141	& srcv(jpr_otx1)%clgrid, ztx, zty )
[3294]	1142	frcv(jpr_otx1)%z3(:,:,1) = ztx(:,:) ! overwrite 1st comp. on the 1st grid
	1143	frcv(jpr_oty1)%z3(:,:,1) = zty(:,:) ! overwrite 2nd comp. on the 1st grid
[1218]	1144	!
	1145	IF( srcv(jpr_otx2)%laction ) THEN
[3294]	1146	CALL geo2oce( frcv(jpr_otx2)%z3(:,:,1), frcv(jpr_oty2)%z3(:,:,1), frcv(jpr_otz2)%z3(:,:,1), &
[1218]	1147	& srcv(jpr_otx2)%clgrid, ztx, zty )
[3294]	1148	frcv(jpr_otx2)%z3(:,:,1) = ztx(:,:) ! overwrite 1st comp. on the 2nd grid
	1149	frcv(jpr_oty2)%z3(:,:,1) = zty(:,:) ! overwrite 2nd comp. on the 2nd grid
[1218]	1150	ENDIF
	1151	!
	1152	ENDIF
	1153	!
[3294]	1154	IF( TRIM( sn_rcv_tau%clvor ) == 'eastward-northward' ) THEN ! 2 components oriented along the local grid
[1218]	1155	! ! (geographical to local grid -> rotate the components)
[3294]	1156	CALL rot_rep( frcv(jpr_otx1)%z3(:,:,1), frcv(jpr_oty1)%z3(:,:,1), srcv(jpr_otx1)%clgrid, 'en->i', ztx )
[1218]	1157	IF( srcv(jpr_otx2)%laction ) THEN
[3294]	1158	CALL rot_rep( frcv(jpr_otx2)%z3(:,:,1), frcv(jpr_oty2)%z3(:,:,1), srcv(jpr_otx2)%clgrid, 'en->j', zty )
[7646]	1159	ELSE
[3294]	1160	CALL rot_rep( frcv(jpr_otx1)%z3(:,:,1), frcv(jpr_oty1)%z3(:,:,1), srcv(jpr_otx1)%clgrid, 'en->j', zty )
[1218]	1161	ENDIF
[3632]	1162	frcv(jpr_otx1)%z3(:,:,1) = ztx(:,:) ! overwrite 1st component on the 1st grid
[3294]	1163	frcv(jpr_oty1)%z3(:,:,1) = zty(:,:) ! overwrite 2nd component on the 2nd grid
[1218]	1164	ENDIF
	1165	!
	1166	IF( srcv(jpr_otx1)%clgrid == 'T' ) THEN
[12377]	1167	DO_2D_00_00
	1168	frcv(jpr_otx1)%z3(ji,jj,1) = 0.5 * ( frcv(jpr_otx1)%z3(ji+1,jj ,1) + frcv(jpr_otx1)%z3(ji,jj,1) )
	1169	frcv(jpr_oty1)%z3(ji,jj,1) = 0.5 * ( frcv(jpr_oty1)%z3(ji ,jj+1,1) + frcv(jpr_oty1)%z3(ji,jj,1) )
	1170	END_2D
[10425]	1171	CALL lbc_lnk_multi( 'sbccpl', frcv(jpr_otx1)%z3(:,:,1), 'U', -1., frcv(jpr_oty1)%z3(:,:,1), 'V', -1. )
[1218]	1172	ENDIF
[1696]	1173	llnewtx = .TRUE.
	1174	ELSE
	1175	llnewtx = .FALSE.
[1218]	1176	ENDIF
	1177	! ! ========================= !
	1178	ELSE ! No dynamical coupling !
	1179	! ! ========================= !
[3294]	1180	frcv(jpr_otx1)%z3(:,:,1) = 0.e0 ! here simply set to zero
	1181	frcv(jpr_oty1)%z3(:,:,1) = 0.e0 ! an external read in a file can be added instead
[1696]	1182	llnewtx = .TRUE.
[1218]	1183	!
	1184	ENDIF
[1696]	1185	! ! ========================= !
	1186	! ! wind stress module ! (taum)
	1187	! ! ========================= !
	1188	IF( .NOT. srcv(jpr_taum)%laction ) THEN ! compute wind stress module from its components if not received
	1189	! => need to be done only when otx1 was changed
	1190	IF( llnewtx ) THEN
[12377]	1191	DO_2D_00_00
	1192	zzx = frcv(jpr_otx1)%z3(ji-1,jj ,1) + frcv(jpr_otx1)%z3(ji,jj,1)
	1193	zzy = frcv(jpr_oty1)%z3(ji ,jj-1,1) + frcv(jpr_oty1)%z3(ji,jj,1)
	1194	frcv(jpr_taum)%z3(ji,jj,1) = 0.5 * SQRT( zzx * zzx + zzy * zzy )
	1195	END_2D
[10425]	1196	CALL lbc_lnk( 'sbccpl', frcv(jpr_taum)%z3(:,:,1), 'T', 1. )
[1696]	1197	llnewtau = .TRUE.
	1198	ELSE
	1199	llnewtau = .FALSE.
	1200	ENDIF
	1201	ELSE
[1706]	1202	llnewtau = nrcvinfo(jpr_taum) == OASIS_Rcv
[1726]	1203	! Stress module can be negative when received (interpolation problem)
	1204	IF( llnewtau ) THEN
[3625]	1205	frcv(jpr_taum)%z3(:,:,1) = MAX( 0._wp, frcv(jpr_taum)%z3(:,:,1) )
[1726]	1206	ENDIF
[1696]	1207	ENDIF
[5407]	1208	!
[1696]	1209	! ! ========================= !
	1210	! ! 10 m wind speed ! (wndm)
	1211	! ! ========================= !
	1212	IF( .NOT. srcv(jpr_w10m)%laction ) THEN ! compute wind spreed from wind stress module if not received
	1213	! => need to be done only when taumod was changed
	1214	IF( llnewtau ) THEN
[1695]	1215	zcoef = 1. / ( zrhoa * zcdrag )
[12377]	1216	DO_2D_11_11
	1217	frcv(jpr_w10m)%z3(ji,jj,1) = SQRT( frcv(jpr_taum)%z3(ji,jj,1) * zcoef )
	1218	END_2D
[1695]	1219	ENDIF
[1696]	1220	ENDIF
	1221
[3294]	1222	! u(v)tau and taum will be modified by ice model
[1696]	1223	! -> need to be reset before each call of the ice/fsbc
	1224	IF( MOD( kt-1, k_fsbc ) == 0 ) THEN
	1225	!
[5407]	1226	IF( ln_mixcpl ) THEN
	1227	utau(:,:) = utau(:,:) * xcplmask(:,:,0) + frcv(jpr_otx1)%z3(:,:,1) * zmsk(:,:)
	1228	vtau(:,:) = vtau(:,:) * xcplmask(:,:,0) + frcv(jpr_oty1)%z3(:,:,1) * zmsk(:,:)
	1229	taum(:,:) = taum(:,:) * xcplmask(:,:,0) + frcv(jpr_taum)%z3(:,:,1) * zmsk(:,:)
	1230	wndm(:,:) = wndm(:,:) * xcplmask(:,:,0) + frcv(jpr_w10m)%z3(:,:,1) * zmsk(:,:)
	1231	ELSE
	1232	utau(:,:) = frcv(jpr_otx1)%z3(:,:,1)
	1233	vtau(:,:) = frcv(jpr_oty1)%z3(:,:,1)
	1234	taum(:,:) = frcv(jpr_taum)%z3(:,:,1)
	1235	wndm(:,:) = frcv(jpr_w10m)%z3(:,:,1)
	1236	ENDIF
[1705]	1237	CALL iom_put( "taum_oce", taum ) ! output wind stress module
[1695]	1238	!
[1218]	1239	ENDIF
[3294]	1240
[5407]	1241	! ! ================== !
	1242	! ! atmosph. CO2 (ppm) !
	1243	! ! ================== !
[3294]	1244	IF( srcv(jpr_co2)%laction ) atm_co2(:,:) = frcv(jpr_co2)%z3(:,:,1)
[9019]	1245	!
[7646]	1246	! ! ========================= !
	1247	! ! Mean Sea Level Pressure ! (taum)
	1248	! ! ========================= !
	1249	IF( srcv(jpr_mslp)%laction ) THEN ! UKMO SHELF effect of atmospheric pressure on SSH
	1250	IF( kt /= nit000 ) ssh_ibb(:,:) = ssh_ib(:,:) !* Swap of ssh_ib fields
[3294]	1251
[12489]	1252	r1_grau = 1.e0 / (grav * rho0) !* constant for optimization
[7646]	1253	ssh_ib(:,:) = - ( frcv(jpr_mslp)%z3(:,:,1) - rpref ) * r1_grau ! equivalent ssh (inverse barometer)
	1254	apr (:,:) = frcv(jpr_mslp)%z3(:,:,1) !atmospheric pressure
	1255
	1256	IF( kt == nit000 ) ssh_ibb(:,:) = ssh_ib(:,:) ! correct this later (read from restart if possible)
[12377]	1257	ENDIF
[7646]	1258	!
	1259	IF( ln_sdw ) THEN ! Stokes Drift correction activated
[9023]	1260	! ! ========================= !
	1261	! ! Stokes drift u !
	1262	! ! ========================= !
	1263	IF( srcv(jpr_sdrftx)%laction ) ut0sd(:,:) = frcv(jpr_sdrftx)%z3(:,:,1)
	1264	!
	1265	! ! ========================= !
	1266	! ! Stokes drift v !
	1267	! ! ========================= !
	1268	IF( srcv(jpr_sdrfty)%laction ) vt0sd(:,:) = frcv(jpr_sdrfty)%z3(:,:,1)
	1269	!
	1270	! ! ========================= !
	1271	! ! Wave mean period !
	1272	! ! ========================= !
	1273	IF( srcv(jpr_wper)%laction ) wmp(:,:) = frcv(jpr_wper)%z3(:,:,1)
	1274	!
	1275	! ! ========================= !
	1276	! ! Significant wave height !
	1277	! ! ========================= !
	1278	IF( srcv(jpr_hsig)%laction ) hsw(:,:) = frcv(jpr_hsig)%z3(:,:,1)
	1279	!
	1280	! ! ========================= !
	1281	! ! Wave peak frequency !
	1282	! ! ========================= !
	1283	IF( srcv(jpr_wfreq)%laction ) wfreq(:,:) = frcv(jpr_wfreq)%z3(:,:,1)
	1284	!
	1285	! ! ========================= !
	1286	! ! Vertical mixing Qiao !
	1287	! ! ========================= !
[9033]	1288	IF( srcv(jpr_wnum)%laction .AND. ln_zdfswm ) wnum(:,:) = frcv(jpr_wnum)%z3(:,:,1)
[7646]	1289
	1290	! Calculate the 3D Stokes drift both in coupled and not fully uncoupled mode
	1291	IF( srcv(jpr_sdrftx)%laction .OR. srcv(jpr_sdrfty)%laction .OR. srcv(jpr_wper)%laction &
[9023]	1292	.OR. srcv(jpr_hsig)%laction .OR. srcv(jpr_wfreq)%laction) THEN
[12377]	1293	CALL sbc_stokes( Kmm )
[7646]	1294	ENDIF
	1295	ENDIF
	1296	! ! ========================= !
	1297	! ! Stress adsorbed by waves !
	1298	! ! ========================= !
[9034]	1299	IF( srcv(jpr_tauwoc)%laction .AND. ln_tauwoc ) tauoc_wave(:,:) = frcv(jpr_tauwoc)%z3(:,:,1)
[7646]	1300
[9023]	1301	! ! ========================= !
	1302	! ! Stress component by waves !
	1303	! ! ========================= !
	1304	IF( srcv(jpr_tauwx)%laction .AND. srcv(jpr_tauwy)%laction .AND. ln_tauw ) THEN
	1305	tauw_x(:,:) = frcv(jpr_tauwx)%z3(:,:,1)
	1306	tauw_y(:,:) = frcv(jpr_tauwy)%z3(:,:,1)
	1307	ENDIF
	1308
[7646]	1309	! ! ========================= !
	1310	! ! Wave drag coefficient !
	1311	! ! ========================= !
[9019]	1312	IF( srcv(jpr_wdrag)%laction .AND. ln_cdgw ) cdn_wave(:,:) = frcv(jpr_wdrag)%z3(:,:,1)
[7646]	1313
[5407]	1314	! Fields received by SAS when OASIS coupling
	1315	! (arrays no more filled at sbcssm stage)
	1316	! ! ================== !
	1317	! ! SSS !
	1318	! ! ================== !
	1319	IF( srcv(jpr_soce)%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1320	sss_m(:,:) = frcv(jpr_soce)%z3(:,:,1)
	1321	CALL iom_put( 'sss_m', sss_m )
	1322	ENDIF
	1323	!
	1324	! ! ================== !
	1325	! ! SST !
	1326	! ! ================== !
	1327	IF( srcv(jpr_toce)%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1328	sst_m(:,:) = frcv(jpr_toce)%z3(:,:,1)
[6489]	1329	IF( srcv(jpr_soce)%laction .AND. l_useCT ) THEN ! make sure that sst_m is the potential temperature
[5407]	1330	sst_m(:,:) = eos_pt_from_ct( sst_m(:,:), sss_m(:,:) )
	1331	ENDIF
	1332	ENDIF
	1333	! ! ================== !
	1334	! ! SSH !
	1335	! ! ================== !
	1336	IF( srcv(jpr_ssh )%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1337	ssh_m(:,:) = frcv(jpr_ssh )%z3(:,:,1)
	1338	CALL iom_put( 'ssh_m', ssh_m )
	1339	ENDIF
	1340	! ! ================== !
	1341	! ! surface currents !
	1342	! ! ================== !
	1343	IF( srcv(jpr_ocx1)%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1344	ssu_m(:,:) = frcv(jpr_ocx1)%z3(:,:,1)
[12377]	1345	uu(:,:,1,Kbb) = ssu_m(:,:) ! will be used in icestp in the call of ice_forcing_tau
	1346	uu(:,:,1,Kmm) = ssu_m(:,:) ! will be used in sbc_cpl_snd if atmosphere coupling
[5407]	1347	CALL iom_put( 'ssu_m', ssu_m )
	1348	ENDIF
	1349	IF( srcv(jpr_ocy1)%laction ) THEN
	1350	ssv_m(:,:) = frcv(jpr_ocy1)%z3(:,:,1)
[12377]	1351	vv(:,:,1,Kbb) = ssv_m(:,:) ! will be used in icestp in the call of ice_forcing_tau
	1352	vv(:,:,1,Kmm) = ssv_m(:,:) ! will be used in sbc_cpl_snd if atmosphere coupling
[5407]	1353	CALL iom_put( 'ssv_m', ssv_m )
	1354	ENDIF
	1355	! ! ======================== !
	1356	! ! first T level thickness !
	1357	! ! ======================== !
	1358	IF( srcv(jpr_e3t1st )%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1359	e3t_m(:,:) = frcv(jpr_e3t1st )%z3(:,:,1)
	1360	CALL iom_put( 'e3t_m', e3t_m(:,:) )
	1361	ENDIF
	1362	! ! ================================ !
	1363	! ! fraction of solar net radiation !
	1364	! ! ================================ !
	1365	IF( srcv(jpr_fraqsr)%laction ) THEN ! received by sas in case of opa <-> sas coupling
	1366	frq_m(:,:) = frcv(jpr_fraqsr)%z3(:,:,1)
	1367	CALL iom_put( 'frq_m', frq_m )
	1368	ENDIF
	1369
[1218]	1370	! ! ========================= !
[5407]	1371	IF( k_ice <= 1 .AND. MOD( kt-1, k_fsbc ) == 0 ) THEN ! heat & freshwater fluxes ! (Ocean only case)
[1218]	1372	! ! ========================= !
	1373	!
[3625]	1374	! ! total freshwater fluxes over the ocean (emp)
[5407]	1375	IF( srcv(jpr_oemp)%laction .OR. srcv(jpr_rain)%laction ) THEN
	1376	SELECT CASE( TRIM( sn_rcv_emp%cldes ) ) ! evaporation - precipitation
	1377	CASE( 'conservative' )
	1378	zemp(:,:) = frcv(jpr_tevp)%z3(:,:,1) - ( frcv(jpr_rain)%z3(:,:,1) + frcv(jpr_snow)%z3(:,:,1) )
	1379	CASE( 'oce only', 'oce and ice' )
	1380	zemp(:,:) = frcv(jpr_oemp)%z3(:,:,1)
	1381	CASE default
	1382	CALL ctl_stop( 'sbc_cpl_rcv: wrong definition of sn_rcv_emp%cldes' )
	1383	END SELECT
	1384	ELSE
	1385	zemp(:,:) = 0._wp
	1386	ENDIF
[1218]	1387	!
	1388	! ! runoffs and calving (added in emp)
[5407]	1389	IF( srcv(jpr_rnf)%laction ) rnf(:,:) = frcv(jpr_rnf)%z3(:,:,1)
	1390	IF( srcv(jpr_cal)%laction ) zemp(:,:) = zemp(:,:) - frcv(jpr_cal)%z3(:,:,1)
[7788]	1391
	1392	IF( srcv(jpr_icb)%laction ) THEN
	1393	fwficb(:,:) = frcv(jpr_icb)%z3(:,:,1)
	1394	rnf(:,:) = rnf(:,:) + fwficb(:,:) ! iceberg added to runfofs
	1395	ENDIF
[12377]	1396	!
	1397	! ice shelf fwf
	1398	IF( srcv(jpr_isf)%laction ) THEN
	1399	fwfisf_oasis(:,:) = - frcv(jpr_isf)%z3(:,:,1) ! fresh water flux from the isf (fwfisf <0 mean melting)
	1400	END IF
[7788]	1401
[5407]	1402	IF( ln_mixcpl ) THEN ; emp(:,:) = emp(:,:) * xcplmask(:,:,0) + zemp(:,:) * zmsk(:,:)
	1403	ELSE ; emp(:,:) = zemp(:,:)
	1404	ENDIF
[1218]	1405	!
[3625]	1406	! ! non solar heat flux over the ocean (qns)
[5407]	1407	IF( srcv(jpr_qnsoce)%laction ) THEN ; zqns(:,:) = frcv(jpr_qnsoce)%z3(:,:,1)
	1408	ELSE IF( srcv(jpr_qnsmix)%laction ) THEN ; zqns(:,:) = frcv(jpr_qnsmix)%z3(:,:,1)
	1409	ELSE ; zqns(:,:) = 0._wp
[12377]	1410	ENDIF
[4990]	1411	! update qns over the free ocean with:
[5407]	1412	IF( nn_components /= jp_iam_opa ) THEN
	1413	zqns(:,:) = zqns(:,:) - zemp(:,:) * sst_m(:,:) * rcp ! remove heat content due to mass flux (assumed to be at SST)
	1414	IF( srcv(jpr_snow )%laction ) THEN
[9935]	1415	zqns(:,:) = zqns(:,:) - frcv(jpr_snow)%z3(:,:,1) * rLfus ! energy for melting solid precipitation over the free ocean
[5407]	1416	ENDIF
[3625]	1417	ENDIF
[7788]	1418	!
[9935]	1419	IF( srcv(jpr_icb)%laction ) zqns(:,:) = zqns(:,:) - frcv(jpr_icb)%z3(:,:,1) * rLfus ! remove heat content associated to iceberg melting
[7788]	1420	!
[5407]	1421	IF( ln_mixcpl ) THEN ; qns(:,:) = qns(:,:) * xcplmask(:,:,0) + zqns(:,:) * zmsk(:,:)
	1422	ELSE ; qns(:,:) = zqns(:,:)
	1423	ENDIF
[3625]	1424
	1425	! ! solar flux over the ocean (qsr)
[5407]	1426	IF ( srcv(jpr_qsroce)%laction ) THEN ; zqsr(:,:) = frcv(jpr_qsroce)%z3(:,:,1)
	1427	ELSE IF( srcv(jpr_qsrmix)%laction ) then ; zqsr(:,:) = frcv(jpr_qsrmix)%z3(:,:,1)
	1428	ELSE ; zqsr(:,:) = 0._wp
	1429	ENDIF
	1430	IF( ln_dm2dc .AND. ln_cpl ) zqsr(:,:) = sbc_dcy( zqsr ) ! modify qsr to include the diurnal cycle
	1431	IF( ln_mixcpl ) THEN ; qsr(:,:) = qsr(:,:) * xcplmask(:,:,0) + zqsr(:,:) * zmsk(:,:)
	1432	ELSE ; qsr(:,:) = zqsr(:,:)
	1433	ENDIF
[3625]	1434	!
[5407]	1435	! salt flux over the ocean (received by opa in case of opa <-> sas coupling)
	1436	IF( srcv(jpr_sflx )%laction ) sfx(:,:) = frcv(jpr_sflx )%z3(:,:,1)
	1437	! Ice cover (received by opa in case of opa <-> sas coupling)
	1438	IF( srcv(jpr_fice )%laction ) fr_i(:,:) = frcv(jpr_fice )%z3(:,:,1)
	1439	!
[1218]	1440	ENDIF
	1441	!
	1442	END SUBROUTINE sbc_cpl_rcv
	1443
	1444
	1445	SUBROUTINE sbc_cpl_ice_tau( p_taui, p_tauj )
	1446	!!----------------------------------------------------------------------
	1447	!! * ROUTINE sbc_cpl_ice_tau *
	1448	!!
	1449	!! ** Purpose : provide the stress over sea-ice in coupled mode
	1450	!!
	1451	!! ** Method : transform the received stress from the atmosphere into
	1452	!! an atmosphere-ice stress in the (i,j) ocean referencial
[9767]	1453	!! and at the velocity point of the sea-ice model:
[1218]	1454	!! 'C'-grid : i- (j-) components given at U- (V-) point
	1455	!!
	1456	!! The received stress are :
	1457	!! - defined by 3 components (if cartesian coordinate)
	1458	!! or by 2 components (if spherical)
	1459	!! - oriented along geographical coordinate (if eastward-northward)
	1460	!! or along the local grid coordinate (if local grid)
	1461	!! - given at U- and V-point, resp. if received on 2 grids
	1462	!! or at a same point (T or I) if received on 1 grid
	1463	!! Therefore and if necessary, they are successively
	1464	!! processed in order to obtain them
	1465	!! first as 2 components on the sphere
	1466	!! second as 2 components oriented along the local grid
[9767]	1467	!! third as 2 components on the ice grid point
[1218]	1468	!!
[4148]	1469	!! Except in 'oce and ice' case, only one vector stress field
[1218]	1470	!! is received. It has already been processed in sbc_cpl_rcv
	1471	!! so that it is now defined as (i,j) components given at U-
[9767]	1472	!! and V-points, respectively.
[1218]	1473	!!
[9767]	1474	!! ** Action : return ptau_i, ptau_j, the stress over the ice
[1218]	1475	!!----------------------------------------------------------------------
[2715]	1476	REAL(wp), INTENT(out), DIMENSION(:,:) :: p_taui ! i- & j-components of atmos-ice stress [N/m2]
	1477	REAL(wp), INTENT(out), DIMENSION(:,:) :: p_tauj ! at I-point (B-grid) or U & V-point (C-grid)
	1478	!!
[6140]	1479	INTEGER :: ji, jj ! dummy loop indices
	1480	INTEGER :: itx ! index of taux over ice
[9019]	1481	REAL(wp), DIMENSION(jpi,jpj) :: ztx, zty
[1218]	1482	!!----------------------------------------------------------------------
[3294]	1483	!
[4990]	1484	IF( srcv(jpr_itx1)%laction ) THEN ; itx = jpr_itx1
[1218]	1485	ELSE ; itx = jpr_otx1
	1486	ENDIF
	1487
	1488	! do something only if we just received the stress from atmosphere
[1698]	1489	IF( nrcvinfo(itx) == OASIS_Rcv ) THEN
[4990]	1490	! ! ======================= !
	1491	IF( srcv(jpr_itx1)%laction ) THEN ! ice stress received !
	1492	! ! ======================= !
[1218]	1493	!
[3294]	1494	IF( TRIM( sn_rcv_tau%clvref ) == 'cartesian' ) THEN ! 2 components on the sphere
[1218]	1495	! ! (cartesian to spherical -> 3 to 2 components)
[3294]	1496	CALL geo2oce( frcv(jpr_itx1)%z3(:,:,1), frcv(jpr_ity1)%z3(:,:,1), frcv(jpr_itz1)%z3(:,:,1), &
[1218]	1497	& srcv(jpr_itx1)%clgrid, ztx, zty )
[3294]	1498	frcv(jpr_itx1)%z3(:,:,1) = ztx(:,:) ! overwrite 1st comp. on the 1st grid
	1499	frcv(jpr_ity1)%z3(:,:,1) = zty(:,:) ! overwrite 2nd comp. on the 1st grid
[1218]	1500	!
	1501	IF( srcv(jpr_itx2)%laction ) THEN
[3294]	1502	CALL geo2oce( frcv(jpr_itx2)%z3(:,:,1), frcv(jpr_ity2)%z3(:,:,1), frcv(jpr_itz2)%z3(:,:,1), &
[1218]	1503	& srcv(jpr_itx2)%clgrid, ztx, zty )
[3294]	1504	frcv(jpr_itx2)%z3(:,:,1) = ztx(:,:) ! overwrite 1st comp. on the 2nd grid
	1505	frcv(jpr_ity2)%z3(:,:,1) = zty(:,:) ! overwrite 2nd comp. on the 2nd grid
[1218]	1506	ENDIF
	1507	!
[888]	1508	ENDIF
[1218]	1509	!
[3294]	1510	IF( TRIM( sn_rcv_tau%clvor ) == 'eastward-northward' ) THEN ! 2 components oriented along the local grid
[1218]	1511	! ! (geographical to local grid -> rotate the components)
[3294]	1512	CALL rot_rep( frcv(jpr_itx1)%z3(:,:,1), frcv(jpr_ity1)%z3(:,:,1), srcv(jpr_itx1)%clgrid, 'en->i', ztx )
[1218]	1513	IF( srcv(jpr_itx2)%laction ) THEN
[3294]	1514	CALL rot_rep( frcv(jpr_itx2)%z3(:,:,1), frcv(jpr_ity2)%z3(:,:,1), srcv(jpr_itx2)%clgrid, 'en->j', zty )
[1218]	1515	ELSE
[3294]	1516	CALL rot_rep( frcv(jpr_itx1)%z3(:,:,1), frcv(jpr_ity1)%z3(:,:,1), srcv(jpr_itx1)%clgrid, 'en->j', zty )
[1218]	1517	ENDIF
[3632]	1518	frcv(jpr_itx1)%z3(:,:,1) = ztx(:,:) ! overwrite 1st component on the 1st grid
[3294]	1519	frcv(jpr_ity1)%z3(:,:,1) = zty(:,:) ! overwrite 2nd component on the 1st grid
[1218]	1520	ENDIF
	1521	! ! ======================= !
	1522	ELSE ! use ocean stress !
	1523	! ! ======================= !
[3294]	1524	frcv(jpr_itx1)%z3(:,:,1) = frcv(jpr_otx1)%z3(:,:,1)
	1525	frcv(jpr_ity1)%z3(:,:,1) = frcv(jpr_oty1)%z3(:,:,1)
[1218]	1526	!
	1527	ENDIF
	1528	! ! ======================= !
	1529	! ! put on ice grid !
	1530	! ! ======================= !
	1531	!
	1532	! j+1 j -----V---F
[9767]	1533	! ice stress on ice velocity point ! \|
	1534	! (C-grid ==>(U,V)) j \| T U
[1218]	1535	! \| \|
	1536	! j j-1 -I-------\|
	1537	! (for I) \| \|
	1538	! i-1 i i
	1539	! i i+1 (for I)
[9767]	1540	SELECT CASE ( srcv(jpr_itx1)%clgrid )
	1541	CASE( 'U' )
	1542	p_taui(:,:) = frcv(jpr_itx1)%z3(:,:,1) ! (U,V) ==> (U,V)
	1543	p_tauj(:,:) = frcv(jpr_ity1)%z3(:,:,1)
	1544	CASE( 'F' )
[12377]	1545	DO_2D_00_00
	1546	p_taui(ji,jj) = 0.5 * ( frcv(jpr_itx1)%z3(ji,jj,1) + frcv(jpr_itx1)%z3(ji ,jj-1,1) )
	1547	p_tauj(ji,jj) = 0.5 * ( frcv(jpr_ity1)%z3(ji,jj,1) + frcv(jpr_ity1)%z3(ji-1,jj ,1) )
	1548	END_2D
[9767]	1549	CASE( 'T' )
[12377]	1550	DO_2D_00_00
	1551	p_taui(ji,jj) = 0.5 * ( frcv(jpr_itx1)%z3(ji+1,jj ,1) + frcv(jpr_itx1)%z3(ji,jj,1) )
	1552	p_tauj(ji,jj) = 0.5 * ( frcv(jpr_ity1)%z3(ji ,jj+1,1) + frcv(jpr_ity1)%z3(ji,jj,1) )
	1553	END_2D
[9767]	1554	CASE( 'I' )
[12377]	1555	DO_2D_00_00
	1556	p_taui(ji,jj) = 0.5 * ( frcv(jpr_itx1)%z3(ji+1,jj+1,1) + frcv(jpr_itx1)%z3(ji+1,jj ,1) )
	1557	p_tauj(ji,jj) = 0.5 * ( frcv(jpr_ity1)%z3(ji+1,jj+1,1) + frcv(jpr_ity1)%z3(ji ,jj+1,1) )
	1558	END_2D
[1218]	1559	END SELECT
[9767]	1560	IF( srcv(jpr_itx1)%clgrid /= 'U' ) THEN
[10425]	1561	CALL lbc_lnk_multi( 'sbccpl', p_taui, 'U', -1., p_tauj, 'V', -1. )
[9767]	1562	ENDIF
	1563
[1218]	1564	ENDIF
[3294]	1565	!
[1218]	1566	END SUBROUTINE sbc_cpl_ice_tau
	1567
	1568
[9019]	1569	SUBROUTINE sbc_cpl_ice_flx( picefr, palbi, psst, pist, phs, phi )
[1218]	1570	!!----------------------------------------------------------------------
[3294]	1571	!! * ROUTINE sbc_cpl_ice_flx *
[1218]	1572	!!
[6722]	1573	!! ** Purpose : provide the heat and freshwater fluxes of the ocean-ice system
[1218]	1574	!!
	1575	!! ** Method : transform the fields received from the atmosphere into
	1576	!! surface heat and fresh water boundary condition for the
	1577	!! ice-ocean system. The following fields are provided:
[6722]	1578	!! * total non solar, solar and freshwater fluxes (qns_tot,
[1218]	1579	!! qsr_tot and emp_tot) (total means weighted ice-ocean flux)
	1580	!! NB: emp_tot include runoffs and calving.
[6722]	1581	!! * fluxes over ice (qns_ice, qsr_ice, emp_ice) where
[1218]	1582	!! emp_ice = sublimation - solid precipitation as liquid
	1583	!! precipitation are re-routed directly to the ocean and
[6722]	1584	!! calving directly enter the ocean (runoffs are read but included in trasbc.F90)
	1585	!! * solid precipitation (sprecip), used to add to qns_tot
[1218]	1586	!! the heat lost associated to melting solid precipitation
	1587	!! over the ocean fraction.
[6722]	1588	!! * heat content of rain, snow and evap can also be provided,
	1589	!! otherwise heat flux associated with these mass flux are
	1590	!! guessed (qemp_oce, qemp_ice)
[1218]	1591	!!
[6722]	1592	!! - the fluxes have been separated from the stress as
	1593	!! (a) they are updated at each ice time step compare to
	1594	!! an update at each coupled time step for the stress, and
	1595	!! (b) the conservative computation of the fluxes over the
	1596	!! sea-ice area requires the knowledge of the ice fraction
	1597	!! after the ice advection and before the ice thermodynamics,
	1598	!! so that the stress is updated before the ice dynamics
	1599	!! while the fluxes are updated after it.
[1218]	1600	!!
[6722]	1601	!! ** Details
[9019]	1602	!! qns_tot = (1-a) * qns_oce + a * qns_ice => provided
[6722]	1603	!! + qemp_oce + qemp_ice => recalculated and added up to qns
	1604	!!
[9019]	1605	!! qsr_tot = (1-a) * qsr_oce + a * qsr_ice => provided
[6722]	1606	!!
[7968]	1607	!! emp_tot = emp_oce + emp_ice => calving is provided and added to emp_tot (and emp_oce).
	1608	!! runoff (which includes rivers+icebergs) and iceshelf
	1609	!! are provided but not included in emp here. Only runoff will
	1610	!! be included in emp in other parts of NEMO code
[1218]	1611	!! ** Action : update at each nf_ice time step:
[3294]	1612	!! qns_tot, qsr_tot non-solar and solar total heat fluxes
	1613	!! qns_ice, qsr_ice non-solar and solar heat fluxes over the ice
[6722]	1614	!! emp_tot total evaporation - precipitation(liquid and solid) (-calving)
	1615	!! emp_ice ice sublimation - solid precipitation over the ice
	1616	!! dqns_ice d(non-solar heat flux)/d(Temperature) over the ice
	1617	!! sprecip solid precipitation over the ocean
[1218]	1618	!!----------------------------------------------------------------------
[12283]	1619	REAL(wp), INTENT(in) , DIMENSION(:,:) :: picefr ! ice fraction [0 to 1]
	1620	! !! ! optional arguments, used only in 'mixed oce-ice' case or for Met-Office coupling
	1621	REAL(wp), INTENT(in) , DIMENSION(:,:,:), OPTIONAL :: palbi ! all skies ice albedo
	1622	REAL(wp), INTENT(in) , DIMENSION(:,: ), OPTIONAL :: psst ! sea surface temperature [Celsius]
	1623	REAL(wp), INTENT(inout), DIMENSION(:,:,:), OPTIONAL :: pist ! ice surface temperature [Kelvin] => inout for Met-Office
	1624	REAL(wp), INTENT(in) , DIMENSION(:,:,:), OPTIONAL :: phs ! snow depth [m]
	1625	REAL(wp), INTENT(in) , DIMENSION(:,:,:), OPTIONAL :: phi ! ice thickness [m]
[3294]	1626	!
[9019]	1627	INTEGER :: ji, jj, jl ! dummy loop index
	1628	REAL(wp) :: ztri ! local scalar
	1629	REAL(wp), DIMENSION(jpi,jpj) :: zcptn, zcptrain, zcptsnw, ziceld, zmsk, zsnw
	1630	REAL(wp), DIMENSION(jpi,jpj) :: zemp_tot, zemp_ice, zemp_oce, ztprecip, zsprecip , zevap_oce, zdevap_ice
	1631	REAL(wp), DIMENSION(jpi,jpj) :: zqns_tot, zqns_oce, zqsr_tot, zqsr_oce, zqprec_ice, zqemp_oce, zqemp_ice
[12283]	1632	REAL(wp), DIMENSION(jpi,jpj,jpl) :: zqns_ice, zqsr_ice, zdqns_ice, zqevap_ice, zevap_ice, zqtr_ice_top, ztsu
[1218]	1633	!!----------------------------------------------------------------------
[3294]	1634	!
[5407]	1635	IF( ln_mixcpl ) zmsk(:,:) = 1. - xcplmask(:,:,0)
[9019]	1636	ziceld(:,:) = 1._wp - picefr(:,:)
	1637	zcptn (:,:) = rcp * sst_m(:,:)
[888]	1638	!
[1218]	1639	! ! ========================= !
[6722]	1640	! ! freshwater budget ! (emp_tot)
[1218]	1641	! ! ========================= !
[888]	1642	!
[6722]	1643	! ! solid Precipitation (sprecip)
	1644	! ! liquid + solid Precipitation (tprecip)
	1645	! ! total Evaporation - total Precipitation (emp_tot)
	1646	! ! sublimation - solid precipitation (cell average) (emp_ice)
[3294]	1647	SELECT CASE( TRIM( sn_rcv_emp%cldes ) )
[6722]	1648	CASE( 'conservative' ) ! received fields: jpr_rain, jpr_snow, jpr_ievp, jpr_tevp
	1649	zsprecip(:,:) = frcv(jpr_snow)%z3(:,:,1) ! May need to ensure positive here
	1650	ztprecip(:,:) = frcv(jpr_rain)%z3(:,:,1) + zsprecip(:,:) ! May need to ensure positive here
	1651	zemp_tot(:,:) = frcv(jpr_tevp)%z3(:,:,1) - ztprecip(:,:)
[9019]	1652	zemp_ice(:,:) = ( frcv(jpr_ievp)%z3(:,:,1) - frcv(jpr_snow)%z3(:,:,1) ) * picefr(:,:)
[7761]	1653	CASE( 'oce and ice' ) ! received fields: jpr_sbpr, jpr_semp, jpr_oemp, jpr_ievp
[9019]	1654	zemp_tot(:,:) = ziceld(:,:) * frcv(jpr_oemp)%z3(:,:,1) + picefr(:,:) * frcv(jpr_sbpr)%z3(:,:,1)
	1655	zemp_ice(:,:) = frcv(jpr_semp)%z3(:,:,1) * picefr(:,:)
[5407]	1656	zsprecip(:,:) = frcv(jpr_ievp)%z3(:,:,1) - frcv(jpr_semp)%z3(:,:,1)
	1657	ztprecip(:,:) = frcv(jpr_semp)%z3(:,:,1) - frcv(jpr_sbpr)%z3(:,:,1) + zsprecip(:,:)
[10404]	1658	CASE( 'none' ) ! Not available as for now: needs additional coding below when computing zevap_oce
	1659	! ! since fields received are not defined with none option
	1660	CALL ctl_stop( 'STOP', 'sbccpl/sbc_cpl_ice_flx: some fields are not defined. Change sn_rcv_emp value in namelist namsbc_cpl' )
[1218]	1661	END SELECT
[6722]	1662
[9570]	1663	#if defined key_si3
[9019]	1664	! zsnw = snow fraction over ice after wind blowing (=picefr if no blowing)
	1665	zsnw(:,:) = 0._wp ; CALL ice_thd_snwblow( ziceld, zsnw )
[6416]	1666
[6722]	1667	! --- evaporation minus precipitation corrected (because of wind blowing on snow) --- !
[9019]	1668	zemp_ice(:,:) = zemp_ice(:,:) + zsprecip(:,:) * ( picefr(:,:) - zsnw(:,:) ) ! emp_ice = A * sublimation - zsnw * sprecip
[6722]	1669	zemp_oce(:,:) = zemp_tot(:,:) - zemp_ice(:,:) ! emp_oce = emp_tot - emp_ice
[6711]	1670
[6722]	1671	! --- evaporation over ocean (used later for qemp) --- !
[9019]	1672	zevap_oce(:,:) = frcv(jpr_tevp)%z3(:,:,1) - frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:)
[6722]	1673
[6711]	1674	! --- evaporation over ice (kg/m2/s) --- !
[9019]	1675	DO jl=1,jpl
[12377]	1676	IF(sn_rcv_emp%clcat == 'yes') THEN ; zevap_ice(:,:,jl) = frcv(jpr_ievp)%z3(:,:,jl)
[9019]	1677	ELSE ; zevap_ice(:,:,jl) = frcv(jpr_ievp)%z3(:,:,1 ) ; ENDIF
	1678	ENDDO
	1679
[6416]	1680	! since the sensitivity of evap to temperature (devap/dT) is not prescribed by the atmosphere, we set it to 0
[7968]	1681	! therefore, sublimation is not redistributed over the ice categories when no subgrid scale fluxes are provided by atm.
[6416]	1682	zdevap_ice(:,:) = 0._wp
	1683
[7968]	1684	! --- Continental fluxes --- !
	1685	IF( srcv(jpr_rnf)%laction ) THEN ! runoffs (included in emp later on)
	1686	rnf(:,:) = frcv(jpr_rnf)%z3(:,:,1)
	1687	ENDIF
	1688	IF( srcv(jpr_cal)%laction ) THEN ! calving (put in emp_tot and emp_oce)
[5407]	1689	zemp_tot(:,:) = zemp_tot(:,:) - frcv(jpr_cal)%z3(:,:,1)
[6711]	1690	zemp_oce(:,:) = zemp_oce(:,:) - frcv(jpr_cal)%z3(:,:,1)
[1756]	1691	ENDIF
[7968]	1692	IF( srcv(jpr_icb)%laction ) THEN ! iceberg added to runoffs
[7788]	1693	fwficb(:,:) = frcv(jpr_icb)%z3(:,:,1)
[7968]	1694	rnf(:,:) = rnf(:,:) + fwficb(:,:)
[7788]	1695	ENDIF
[7968]	1696	IF( srcv(jpr_isf)%laction ) THEN ! iceshelf (fwfisf <0 mean melting)
[12377]	1697	fwfisf_oasis(:,:) = - frcv(jpr_isf)%z3(:,:,1)
[7788]	1698	ENDIF
	1699
[5407]	1700	IF( ln_mixcpl ) THEN
	1701	emp_tot(:,:) = emp_tot(:,:) * xcplmask(:,:,0) + zemp_tot(:,:) * zmsk(:,:)
	1702	emp_ice(:,:) = emp_ice(:,:) * xcplmask(:,:,0) + zemp_ice(:,:) * zmsk(:,:)
[6416]	1703	emp_oce(:,:) = emp_oce(:,:) * xcplmask(:,:,0) + zemp_oce(:,:) * zmsk(:,:)
[5407]	1704	sprecip(:,:) = sprecip(:,:) * xcplmask(:,:,0) + zsprecip(:,:) * zmsk(:,:)
	1705	tprecip(:,:) = tprecip(:,:) * xcplmask(:,:,0) + ztprecip(:,:) * zmsk(:,:)
[9019]	1706	DO jl = 1, jpl
	1707	evap_ice (:,:,jl) = evap_ice (:,:,jl) * xcplmask(:,:,0) + zevap_ice (:,:,jl) * zmsk(:,:)
	1708	devap_ice(:,:,jl) = devap_ice(:,:,jl) * xcplmask(:,:,0) + zdevap_ice(:,:) * zmsk(:,:)
	1709	END DO
[5407]	1710	ELSE
[9019]	1711	emp_tot (:,:) = zemp_tot (:,:)
	1712	emp_ice (:,:) = zemp_ice (:,:)
	1713	emp_oce (:,:) = zemp_oce (:,:)
	1714	sprecip (:,:) = zsprecip (:,:)
	1715	tprecip (:,:) = ztprecip (:,:)
	1716	evap_ice(:,:,:) = zevap_ice(:,:,:)
	1717	DO jl = 1, jpl
[6416]	1718	devap_ice(:,:,jl) = zdevap_ice(:,:)
[9019]	1719	END DO
[6416]	1720	ENDIF
[6722]	1721
[6416]	1722	#else
[9019]	1723	zsnw(:,:) = picefr(:,:)
[7968]	1724	! --- Continental fluxes --- !
	1725	IF( srcv(jpr_rnf)%laction ) THEN ! runoffs (included in emp later on)
	1726	rnf(:,:) = frcv(jpr_rnf)%z3(:,:,1)
	1727	ENDIF
	1728	IF( srcv(jpr_cal)%laction ) THEN ! calving (put in emp_tot)
[6416]	1729	zemp_tot(:,:) = zemp_tot(:,:) - frcv(jpr_cal)%z3(:,:,1)
	1730	ENDIF
[7968]	1731	IF( srcv(jpr_icb)%laction ) THEN ! iceberg added to runoffs
[7788]	1732	fwficb(:,:) = frcv(jpr_icb)%z3(:,:,1)
[7968]	1733	rnf(:,:) = rnf(:,:) + fwficb(:,:)
[7788]	1734	ENDIF
[7968]	1735	IF( srcv(jpr_isf)%laction ) THEN ! iceshelf (fwfisf <0 mean melting)
[12377]	1736	fwfisf_oasis(:,:) = - frcv(jpr_isf)%z3(:,:,1)
[7788]	1737	ENDIF
[9019]	1738	!
[6416]	1739	IF( ln_mixcpl ) THEN
	1740	emp_tot(:,:) = emp_tot(:,:) * xcplmask(:,:,0) + zemp_tot(:,:) * zmsk(:,:)
	1741	emp_ice(:,:) = emp_ice(:,:) * xcplmask(:,:,0) + zemp_ice(:,:) * zmsk(:,:)
	1742	sprecip(:,:) = sprecip(:,:) * xcplmask(:,:,0) + zsprecip(:,:) * zmsk(:,:)
	1743	tprecip(:,:) = tprecip(:,:) * xcplmask(:,:,0) + ztprecip(:,:) * zmsk(:,:)
	1744	ELSE
[5407]	1745	emp_tot(:,:) = zemp_tot(:,:)
	1746	emp_ice(:,:) = zemp_ice(:,:)
	1747	sprecip(:,:) = zsprecip(:,:)
	1748	tprecip(:,:) = ztprecip(:,:)
	1749	ENDIF
[9019]	1750	!
	1751	#endif
[5407]	1752
[7968]	1753	! outputs
	1754	!! IF( srcv(jpr_rnf)%laction ) CALL iom_put( 'runoffs' , rnf(:,:) * tmask(:,:,1) ) ! runoff
	1755	!! IF( srcv(jpr_isf)%laction ) CALL iom_put( 'iceshelf_cea', -fwfisf(:,:) * tmask(:,:,1) ) ! iceshelf
	1756	IF( srcv(jpr_cal)%laction ) CALL iom_put( 'calving_cea' , frcv(jpr_cal)%z3(:,:,1) * tmask(:,:,1) ) ! calving
	1757	IF( srcv(jpr_icb)%laction ) CALL iom_put( 'iceberg_cea' , frcv(jpr_icb)%z3(:,:,1) * tmask(:,:,1) ) ! icebergs
[12377]	1758	IF( iom_use('snowpre') ) CALL iom_put( 'snowpre' , sprecip(:,:) ) ! Snow
	1759	IF( iom_use('precip') ) CALL iom_put( 'precip' , tprecip(:,:) ) ! total precipitation
	1760	IF( iom_use('rain') ) CALL iom_put( 'rain' , tprecip(:,:) - sprecip(:,:) ) ! liquid precipitation
	1761	IF( iom_use('snow_ao_cea') ) CALL iom_put( 'snow_ao_cea' , sprecip(:,:) * ( 1._wp - zsnw(:,:) ) ) ! Snow over ice-free ocean (cell average)
	1762	IF( iom_use('snow_ai_cea') ) CALL iom_put( 'snow_ai_cea' , sprecip(:,:) * zsnw(:,:) ) ! Snow over sea-ice (cell average)
	1763	IF( iom_use('rain_ao_cea') ) CALL iom_put( 'rain_ao_cea' , ( tprecip(:,:) - sprecip(:,:) ) * picefr(:,:) ) ! liquid precipitation over ocean (cell average)
	1764	IF( iom_use('subl_ai_cea') ) CALL iom_put( 'subl_ai_cea' , frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:) * tmask(:,:,1) ) ! Sublimation over sea-ice (cell average)
	1765	IF( iom_use('evap_ao_cea') ) CALL iom_put( 'evap_ao_cea' , ( frcv(jpr_tevp)%z3(:,:,1) &
[9019]	1766	& - frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:) ) * tmask(:,:,1) ) ! ice-free oce evap (cell average)
[7968]	1767	! note: runoff output is done in sbcrnf (which includes icebergs too) and iceshelf output is done in sbcisf
	1768	!
[1218]	1769	! ! ========================= !
[3294]	1770	SELECT CASE( TRIM( sn_rcv_qns%cldes ) ) ! non solar heat fluxes ! (qns)
[1218]	1771	! ! ========================= !
[6722]	1772	CASE( 'oce only' ) ! the required field is directly provided
	1773	zqns_tot(:,:) = frcv(jpr_qnsoce)%z3(:,:,1)
	1774	CASE( 'conservative' ) ! the required fields are directly provided
	1775	zqns_tot(:,:) = frcv(jpr_qnsmix)%z3(:,:,1)
[12377]	1776	IF( TRIM(sn_rcv_qns%clcat) == 'yes' ) THEN
[5407]	1777	zqns_ice(:,:,1:jpl) = frcv(jpr_qnsice)%z3(:,:,1:jpl)
[3294]	1778	ELSE
[9019]	1779	DO jl = 1, jpl
[6722]	1780	zqns_ice(:,:,jl) = frcv(jpr_qnsice)%z3(:,:,1) ! Set all category values equal
[9019]	1781	END DO
[3294]	1782	ENDIF
[6722]	1783	CASE( 'oce and ice' ) ! the total flux is computed from ocean and ice fluxes
[9019]	1784	zqns_tot(:,:) = ziceld(:,:) * frcv(jpr_qnsoce)%z3(:,:,1)
[12377]	1785	IF( TRIM(sn_rcv_qns%clcat) == 'yes' ) THEN
[3294]	1786	DO jl=1,jpl
[5407]	1787	zqns_tot(:,: ) = zqns_tot(:,:) + a_i(:,:,jl) * frcv(jpr_qnsice)%z3(:,:,jl)
	1788	zqns_ice(:,:,jl) = frcv(jpr_qnsice)%z3(:,:,jl)
[3294]	1789	ENDDO
	1790	ELSE
[9019]	1791	qns_tot(:,:) = qns_tot(:,:) + picefr(:,:) * frcv(jpr_qnsice)%z3(:,:,1)
	1792	DO jl = 1, jpl
	1793	zqns_tot(:,: ) = zqns_tot(:,:) + picefr(:,:) * frcv(jpr_qnsice)%z3(:,:,1)
[5407]	1794	zqns_ice(:,:,jl) = frcv(jpr_qnsice)%z3(:,:,1)
[9019]	1795	END DO
[3294]	1796	ENDIF
[6722]	1797	CASE( 'mixed oce-ice' ) ! the ice flux is cumputed from the total flux, the SST and ice informations
[3294]	1798	! NEED TO SORT OUT HOW THIS SHOULD WORK IN THE MULTI-CATEGORY CASE - CURRENTLY NOT ALLOWED WHEN INTERFACE INITIALISED
[5407]	1799	zqns_tot(:,: ) = frcv(jpr_qnsmix)%z3(:,:,1)
[12283]	1800	IF ( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
	1801	DO jl = 1, jpl
	1802	zqns_ice(:,:,jl) = frcv(jpr_qnsmix)%z3(:,:,jl) &
	1803	& + frcv(jpr_dqnsdt)%z3(:,:,jl) * ( pist(:,:,jl) - ( ( rt0 + psst(:,:) ) * ziceld(:,:) &
	1804	& + pist(:,:,jl) * picefr(:,:) ) )
	1805	END DO
	1806	ELSE
	1807	DO jl = 1, jpl
	1808	zqns_ice(:,:,jl) = frcv(jpr_qnsmix)%z3(:,:, 1) &
	1809	& + frcv(jpr_dqnsdt)%z3(:,:, 1) * ( pist(:,:,jl) - ( ( rt0 + psst(:,:) ) * ziceld(:,:) &
	1810	& + pist(:,:,jl) * picefr(:,:) ) )
	1811	END DO
	1812	ENDIF
[1218]	1813	END SELECT
[1860]	1814	!
[7968]	1815	! --- calving (removed from qns_tot) --- !
[9935]	1816	IF( srcv(jpr_cal)%laction ) zqns_tot(:,:) = zqns_tot(:,:) - frcv(jpr_cal)%z3(:,:,1) * rLfus ! remove latent heat of calving
	1817	! we suppose it melts at 0deg, though it should be temp. of surrounding ocean
[7968]	1818	! --- iceberg (removed from qns_tot) --- !
[9935]	1819	IF( srcv(jpr_icb)%laction ) zqns_tot(:,:) = zqns_tot(:,:) - frcv(jpr_icb)%z3(:,:,1) * rLfus ! remove latent heat of iceberg melting
[1218]	1820
[9570]	1821	#if defined key_si3
[5407]	1822	! --- non solar flux over ocean --- !
[9019]	1823	! note: ziceld cannot be = 0 since we limit the ice concentration to amax
[5407]	1824	zqns_oce = 0._wp
[9019]	1825	WHERE( ziceld /= 0._wp ) zqns_oce(:,:) = ( zqns_tot(:,:) - SUM( a_i * zqns_ice, dim=3 ) ) / ziceld(:,:)
[5407]	1826
[7813]	1827	! Heat content per unit mass of snow (J/kg)
[9935]	1828	WHERE( SUM( a_i, dim=3 ) > 1.e-10 ) ; zcptsnw(:,:) = rcpi * SUM( (tn_ice - rt0) * a_i, dim=3 ) / SUM( a_i, dim=3 )
[7813]	1829	ELSEWHERE ; zcptsnw(:,:) = zcptn(:,:)
	1830	ENDWHERE
	1831	! Heat content per unit mass of rain (J/kg)
[9019]	1832	zcptrain(:,:) = rcp * ( SUM( (tn_ice(:,:,:) - rt0) * a_i(:,:,:), dim=3 ) + sst_m(:,:) * ziceld(:,:) )
[7813]	1833
[6722]	1834	! --- enthalpy of snow precip over ice in J/m3 (to be used in 1D-thermo) --- !
[9935]	1835	zqprec_ice(:,:) = rhos * ( zcptsnw(:,:) - rLfus )
[5407]	1836
[6416]	1837	! --- heat content of evap over ice in W/m2 (to be used in 1D-thermo) --- !
	1838	DO jl = 1, jpl
[9935]	1839	zqevap_ice(:,:,jl) = 0._wp ! should be -evap * ( ( Tice - rt0 ) * rcpi ) but atm. does not take it into account
[6416]	1840	END DO
[5407]	1841
[7813]	1842	! --- heat flux associated with emp (W/m2) --- !
	1843	zqemp_oce(:,:) = - zevap_oce(:,:) * zcptn (:,:) & ! evap
	1844	& + ( ztprecip(:,:) - zsprecip(:,:) ) * zcptrain(:,:) & ! liquid precip
[9935]	1845	& + zsprecip(:,:) * ( 1._wp - zsnw ) * ( zcptsnw (:,:) - rLfus ) ! solid precip over ocean + snow melting
	1846	zqemp_ice(:,:) = zsprecip(:,:) * zsnw * ( zcptsnw (:,:) - rLfus ) ! solid precip over ice (qevap_ice=0 since atm. does not take it into account)
[9019]	1847	!! zqemp_ice(:,:) = - frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:) * zcptsnw (:,:) & ! ice evap
[9935]	1848	!! & + zsprecip(:,:) * zsnw * zqprec_ice(:,:) * r1_rhos ! solid precip over ice
[7813]	1849
[6416]	1850	! --- total non solar flux (including evap/precip) --- !
	1851	zqns_tot(:,:) = zqns_tot(:,:) + zqemp_ice(:,:) + zqemp_oce(:,:)
	1852
[5407]	1853	! --- in case both coupled/forced are active, we must mix values --- !
	1854	IF( ln_mixcpl ) THEN
	1855	qns_tot(:,:) = qns_tot(:,:) * xcplmask(:,:,0) + zqns_tot(:,:)* zmsk(:,:)
	1856	qns_oce(:,:) = qns_oce(:,:) * xcplmask(:,:,0) + zqns_oce(:,:)* zmsk(:,:)
	1857	DO jl=1,jpl
[6416]	1858	qns_ice (:,:,jl) = qns_ice (:,:,jl) * xcplmask(:,:,0) + zqns_ice (:,:,jl)* zmsk(:,:)
	1859	qevap_ice(:,:,jl) = qevap_ice(:,:,jl) * xcplmask(:,:,0) + zqevap_ice(:,:,jl)* zmsk(:,:)
[5407]	1860	ENDDO
	1861	qprec_ice(:,:) = qprec_ice(:,:) * xcplmask(:,:,0) + zqprec_ice(:,:)* zmsk(:,:)
	1862	qemp_oce (:,:) = qemp_oce(:,:) * xcplmask(:,:,0) + zqemp_oce(:,:)* zmsk(:,:)
[6416]	1863	qemp_ice (:,:) = qemp_ice(:,:) * xcplmask(:,:,0) + zqemp_ice(:,:)* zmsk(:,:)
[5407]	1864	ELSE
	1865	qns_tot (:,: ) = zqns_tot (:,: )
	1866	qns_oce (:,: ) = zqns_oce (:,: )
	1867	qns_ice (:,:,:) = zqns_ice (:,:,:)
[6416]	1868	qevap_ice(:,:,:) = zqevap_ice(:,:,:)
	1869	qprec_ice(:,: ) = zqprec_ice(:,: )
	1870	qemp_oce (:,: ) = zqemp_oce (:,: )
	1871	qemp_ice (:,: ) = zqemp_ice (:,: )
[5407]	1872	ENDIF
[6722]	1873
[5407]	1874	#else
[7968]	1875	zcptsnw (:,:) = zcptn(:,:)
	1876	zcptrain(:,:) = zcptn(:,:)
	1877
[6722]	1878	! clem: this formulation is certainly wrong... but better than it was...
[9935]	1879	zqns_tot(:,:) = zqns_tot(:,:) & ! zqns_tot update over free ocean with:
	1880	& - ( ziceld(:,:) * zsprecip(:,:) * rLfus ) & ! remove the latent heat flux of solid precip. melting
	1881	& - ( zemp_tot(:,:) & ! remove the heat content of mass flux (assumed to be at SST)
[6722]	1882	& - zemp_ice(:,:) ) * zcptn(:,:)
[5407]	1883
	1884	IF( ln_mixcpl ) THEN
[9019]	1885	qns_tot(:,:) = qns(:,:) * ziceld(:,:) + SUM( qns_ice(:,:,:) * a_i(:,:,:), dim=3 ) ! total flux from blk
[5407]	1886	qns_tot(:,:) = qns_tot(:,:) * xcplmask(:,:,0) + zqns_tot(:,:)* zmsk(:,:)
	1887	DO jl=1,jpl
	1888	qns_ice(:,:,jl) = qns_ice(:,:,jl) * xcplmask(:,:,0) + zqns_ice(:,:,jl)* zmsk(:,:)
	1889	ENDDO
	1890	ELSE
	1891	qns_tot(:,: ) = zqns_tot(:,: )
	1892	qns_ice(:,:,:) = zqns_ice(:,:,:)
	1893	ENDIF
[7968]	1894
[5407]	1895	#endif
[7968]	1896	! outputs
[12377]	1897	IF( srcv(jpr_cal)%laction ) CALL iom_put('hflx_cal_cea' , - frcv(jpr_cal)%z3(:,:,1) * rLfus ) ! latent heat from calving
	1898	IF( srcv(jpr_icb)%laction ) CALL iom_put('hflx_icb_cea' , - frcv(jpr_icb)%z3(:,:,1) * rLfus ) ! latent heat from icebergs melting
	1899	IF( iom_use('hflx_rain_cea') ) CALL iom_put('hflx_rain_cea' , ( tprecip(:,:) - sprecip(:,:) ) * zcptrain(:,:) ) ! heat flux from rain (cell average)
	1900	IF( iom_use('hflx_evap_cea') ) CALL iom_put('hflx_evap_cea' , ( frcv(jpr_tevp)%z3(:,:,1) - frcv(jpr_ievp)%z3(:,:,1) &
	1901	& * picefr(:,:) ) * zcptn(:,:) * tmask(:,:,1) ) ! heat flux from evap (cell average)
	1902	IF( iom_use('hflx_prec_cea') ) CALL iom_put('hflx_prec_cea' , sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) + & ! heat flux from all precip (cell avg)
	1903	& ( tprecip(:,:) - sprecip(:,:) ) * zcptrain(:,:) )
	1904	IF( iom_use('hflx_snow_cea') ) CALL iom_put('hflx_snow_cea' , sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) ) ! heat flux from snow (cell average)
	1905	IF( iom_use('hflx_snow_ao_cea') ) CALL iom_put('hflx_snow_ao_cea', sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) &
	1906	& * ( 1._wp - zsnw(:,:) ) ) ! heat flux from snow (over ocean)
	1907	IF( iom_use('hflx_snow_ai_cea') ) CALL iom_put('hflx_snow_ai_cea', sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) &
	1908	& * zsnw(:,:) ) ! heat flux from snow (over ice)
[7968]	1909	! note: hflx for runoff and iceshelf are done in sbcrnf and sbcisf resp.
	1910	!
[1218]	1911	! ! ========================= !
[3294]	1912	SELECT CASE( TRIM( sn_rcv_qsr%cldes ) ) ! solar heat fluxes ! (qsr)
[1218]	1913	! ! ========================= !
[3294]	1914	CASE( 'oce only' )
[5407]	1915	zqsr_tot(:,: ) = MAX( 0._wp , frcv(jpr_qsroce)%z3(:,:,1) )
[1218]	1916	CASE( 'conservative' )
[5407]	1917	zqsr_tot(:,: ) = frcv(jpr_qsrmix)%z3(:,:,1)
[12377]	1918	IF( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
[5407]	1919	zqsr_ice(:,:,1:jpl) = frcv(jpr_qsrice)%z3(:,:,1:jpl)
[3294]	1920	ELSE
	1921	! Set all category values equal for the moment
[9019]	1922	DO jl = 1, jpl
[5407]	1923	zqsr_ice(:,:,jl) = frcv(jpr_qsrice)%z3(:,:,1)
[9019]	1924	END DO
[3294]	1925	ENDIF
[1218]	1926	CASE( 'oce and ice' )
[9019]	1927	zqsr_tot(:,: ) = ziceld(:,:) * frcv(jpr_qsroce)%z3(:,:,1)
[12377]	1928	IF( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
[9019]	1929	DO jl = 1, jpl
[5407]	1930	zqsr_tot(:,: ) = zqsr_tot(:,:) + a_i(:,:,jl) * frcv(jpr_qsrice)%z3(:,:,jl)
	1931	zqsr_ice(:,:,jl) = frcv(jpr_qsrice)%z3(:,:,jl)
[9019]	1932	END DO
[3294]	1933	ELSE
[9019]	1934	qsr_tot(:,: ) = qsr_tot(:,:) + picefr(:,:) * frcv(jpr_qsrice)%z3(:,:,1)
	1935	DO jl = 1, jpl
	1936	zqsr_tot(:,: ) = zqsr_tot(:,:) + picefr(:,:) * frcv(jpr_qsrice)%z3(:,:,1)
[5407]	1937	zqsr_ice(:,:,jl) = frcv(jpr_qsrice)%z3(:,:,1)
[9019]	1938	END DO
[3294]	1939	ENDIF
[1218]	1940	CASE( 'mixed oce-ice' )
[5407]	1941	zqsr_tot(:,: ) = frcv(jpr_qsrmix)%z3(:,:,1)
[3294]	1942	! NEED TO SORT OUT HOW THIS SHOULD WORK IN THE MULTI-CATEGORY CASE - CURRENTLY NOT ALLOWED WHEN INTERFACE INITIALISED
[1232]	1943	! Create solar heat flux over ice using incoming solar heat flux and albedos
	1944	! ( see OASIS3 user guide, 5th edition, p39 )
[12283]	1945	IF ( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
	1946	DO jl = 1, jpl
	1947	zqsr_ice(:,:,jl) = frcv(jpr_qsrmix)%z3(:,:,jl) * ( 1.- palbi(:,:,jl) ) &
	1948	& / ( 1.- ( alb_oce_mix(:,: ) * ziceld(:,:) &
	1949	& + palbi (:,:,jl) * picefr(:,:) ) )
	1950	END DO
	1951	ELSE
	1952	DO jl = 1, jpl
	1953	zqsr_ice(:,:,jl) = frcv(jpr_qsrmix)%z3(:,:, 1) * ( 1.- palbi(:,:,jl) ) &
	1954	& / ( 1.- ( alb_oce_mix(:,: ) * ziceld(:,:) &
	1955	& + palbi (:,:,jl) * picefr(:,:) ) )
	1956	END DO
	1957	ENDIF
[10404]	1958	CASE( 'none' ) ! Not available as for now: needs additional coding
	1959	! ! since fields received, here zqsr_tot, are not defined with none option
	1960	CALL ctl_stop( 'STOP', 'sbccpl/sbc_cpl_ice_flx: some fields are not defined. Change sn_rcv_qsr value in namelist namsbc_cpl' )
[1218]	1961	END SELECT
[5407]	1962	IF( ln_dm2dc .AND. ln_cpl ) THEN ! modify qsr to include the diurnal cycle
	1963	zqsr_tot(:,: ) = sbc_dcy( zqsr_tot(:,: ) )
[9019]	1964	DO jl = 1, jpl
[5407]	1965	zqsr_ice(:,:,jl) = sbc_dcy( zqsr_ice(:,:,jl) )
[9019]	1966	END DO
[2528]	1967	ENDIF
[1218]	1968
[9570]	1969	#if defined key_si3
[5486]	1970	! --- solar flux over ocean --- !
[9019]	1971	! note: ziceld cannot be = 0 since we limit the ice concentration to amax
[5486]	1972	zqsr_oce = 0._wp
[9019]	1973	WHERE( ziceld /= 0._wp ) zqsr_oce(:,:) = ( zqsr_tot(:,:) - SUM( a_i * zqsr_ice, dim=3 ) ) / ziceld(:,:)
[5486]	1974
	1975	IF( ln_mixcpl ) THEN ; qsr_oce(:,:) = qsr_oce(:,:) * xcplmask(:,:,0) + zqsr_oce(:,:)* zmsk(:,:)
	1976	ELSE ; qsr_oce(:,:) = zqsr_oce(:,:) ; ENDIF
	1977	#endif
	1978
[5407]	1979	IF( ln_mixcpl ) THEN
[9019]	1980	qsr_tot(:,:) = qsr(:,:) * ziceld(:,:) + SUM( qsr_ice(:,:,:) * a_i(:,:,:), dim=3 ) ! total flux from blk
[5407]	1981	qsr_tot(:,:) = qsr_tot(:,:) * xcplmask(:,:,0) + zqsr_tot(:,:)* zmsk(:,:)
[9019]	1982	DO jl = 1, jpl
[5407]	1983	qsr_ice(:,:,jl) = qsr_ice(:,:,jl) * xcplmask(:,:,0) + zqsr_ice(:,:,jl)* zmsk(:,:)
[9019]	1984	END DO
[5407]	1985	ELSE
	1986	qsr_tot(:,: ) = zqsr_tot(:,: )
	1987	qsr_ice(:,:,:) = zqsr_ice(:,:,:)
	1988	ENDIF
	1989
[4990]	1990	! ! ========================= !
	1991	SELECT CASE( TRIM( sn_rcv_dqnsdt%cldes ) ) ! d(qns)/dt !
	1992	! ! ========================= !
[1226]	1993	CASE ('coupled')
[12377]	1994	IF( TRIM(sn_rcv_dqnsdt%clcat) == 'yes' ) THEN
[5407]	1995	zdqns_ice(:,:,1:jpl) = frcv(jpr_dqnsdt)%z3(:,:,1:jpl)
[3294]	1996	ELSE
	1997	! Set all category values equal for the moment
	1998	DO jl=1,jpl
[5407]	1999	zdqns_ice(:,:,jl) = frcv(jpr_dqnsdt)%z3(:,:,1)
[3294]	2000	ENDDO
	2001	ENDIF
[1226]	2002	END SELECT
[5407]	2003
	2004	IF( ln_mixcpl ) THEN
	2005	DO jl=1,jpl
	2006	dqns_ice(:,:,jl) = dqns_ice(:,:,jl) * xcplmask(:,:,0) + zdqns_ice(:,:,jl) * zmsk(:,:)
	2007	ENDDO
	2008	ELSE
	2009	dqns_ice(:,:,:) = zdqns_ice(:,:,:)
	2010	ENDIF
[9019]	2011
[9570]	2012	#if defined key_si3
[4990]	2013	! ! ========================= !
[9019]	2014	SELECT CASE( TRIM( sn_rcv_iceflx%cldes ) ) ! ice topmelt and botmelt !
[4990]	2015	! ! ========================= !
[3294]	2016	CASE ('coupled')
[12283]	2017	IF( ln_mixcpl ) THEN
	2018	DO jl=1,jpl
	2019	qml_ice(:,:,jl) = qml_ice(:,:,jl) * xcplmask(:,:,0) + frcv(jpr_topm)%z3(:,:,jl) * zmsk(:,:)
	2020	qcn_ice(:,:,jl) = qcn_ice(:,:,jl) * xcplmask(:,:,0) + frcv(jpr_botm)%z3(:,:,jl) * zmsk(:,:)
	2021	ENDDO
	2022	ELSE
	2023	qml_ice(:,:,:) = frcv(jpr_topm)%z3(:,:,:)
	2024	qcn_ice(:,:,:) = frcv(jpr_botm)%z3(:,:,:)
	2025	ENDIF
[3294]	2026	END SELECT
[9019]	2027	! ! ========================= !
	2028	! ! Transmitted Qsr ! [W/m2]
	2029	! ! ========================= !
[10534]	2030	IF( .NOT.ln_cndflx ) THEN !== No conduction flux as surface forcing ==!
[9019]	2031	!
	2032	! ! ===> used prescribed cloud fraction representative for polar oceans in summer (0.81)
[12283]	2033	ztri = 0.18 * ( 1.0 - cldf_ice ) + 0.35 * cldf_ice ! surface transmission when hi>10cm (Grenfell Maykut 77)
[9019]	2034	!
[12283]	2035	WHERE ( phs(:,:,:) <= 0._wp .AND. phi(:,:,:) < 0.1_wp ) ! linear decrease from hi=0 to 10cm
	2036	zqtr_ice_top(:,:,:) = qsr_ice(:,:,:) * ( ztri + ( 1._wp - ztri ) * ( 1._wp - phi(:,:,:) * 10._wp ) )
	2037	ELSEWHERE( phs(:,:,:) <= 0._wp .AND. phi(:,:,:) >= 0.1_wp ) ! constant (ztri) when hi>10cm
	2038	zqtr_ice_top(:,:,:) = qsr_ice(:,:,:) * ztri
	2039	ELSEWHERE ! zero when hs>0
	2040	zqtr_ice_top(:,:,:) = 0._wp
	2041	END WHERE
[9019]	2042	!
[10534]	2043	ELSEIF( ln_cndflx .AND. .NOT.ln_cndemulate ) THEN !== conduction flux as surface forcing ==!
[9019]	2044	!
[9910]	2045	! ! ===> here we must receive the qtr_ice_top array from the coupler
[9019]	2046	! for now just assume zero (fully opaque ice)
[12283]	2047	zqtr_ice_top(:,:,:) = 0._wp
[9019]	2048	!
[10534]	2049	ENDIF
[9019]	2050	!
[12283]	2051	IF( ln_mixcpl ) THEN
	2052	DO jl=1,jpl
	2053	qtr_ice_top(:,:,jl) = qtr_ice_top(:,:,jl) * xcplmask(:,:,0) + zqtr_ice_top(:,:,jl) * zmsk(:,:)
	2054	ENDDO
	2055	ELSE
	2056	qtr_ice_top(:,:,:) = zqtr_ice_top(:,:,:)
	2057	ENDIF
	2058	! ! ================== !
	2059	! ! ice skin temp. !
	2060	! ! ================== !
	2061	! needed by Met Office
	2062	IF( srcv(jpr_ts_ice)%laction ) THEN
	2063	WHERE ( frcv(jpr_ts_ice)%z3(:,:,:) > 0.0 ) ; ztsu(:,:,:) = 0. + rt0
	2064	ELSEWHERE( frcv(jpr_ts_ice)%z3(:,:,:) < -60. ) ; ztsu(:,:,:) = -60. + rt0
	2065	ELSEWHERE ; ztsu(:,:,:) = frcv(jpr_ts_ice)%z3(:,:,:) + rt0
	2066	END WHERE
	2067	!
	2068	IF( ln_mixcpl ) THEN
	2069	DO jl=1,jpl
	2070	pist(:,:,jl) = pist(:,:,jl) * xcplmask(:,:,0) + ztsu(:,:,jl) * zmsk(:,:)
	2071	ENDDO
	2072	ELSE
	2073	pist(:,:,:) = ztsu(:,:,:)
	2074	ENDIF
	2075	!
	2076	ENDIF
	2077	!
[9019]	2078	#endif
[3294]	2079	!
[1226]	2080	END SUBROUTINE sbc_cpl_ice_flx
[1218]	2081
	2082
[12377]	2083	SUBROUTINE sbc_cpl_snd( kt, Kbb, Kmm )
[1218]	2084	!!----------------------------------------------------------------------
	2085	!! * ROUTINE sbc_cpl_snd *
	2086	!!
	2087	!! ** Purpose : provide the ocean-ice informations to the atmosphere
	2088	!!
[4990]	2089	!! ** Method : send to the atmosphere through a call to cpl_snd
[1218]	2090	!! all the needed fields (as defined in sbc_cpl_init)
	2091	!!----------------------------------------------------------------------
	2092	INTEGER, INTENT(in) :: kt
[12377]	2093	INTEGER, INTENT(in) :: Kbb, Kmm ! ocean model time level index
[2715]	2094	!
[3294]	2095	INTEGER :: ji, jj, jl ! dummy loop indices
[2715]	2096	INTEGER :: isec, info ! local integer
[5407]	2097	REAL(wp) :: zumax, zvmax
[9019]	2098	REAL(wp), DIMENSION(jpi,jpj) :: zfr_l, ztmp1, ztmp2, zotx1, zoty1, zotz1, zitx1, zity1, zitz1
	2099	REAL(wp), DIMENSION(jpi,jpj,jpl) :: ztmp3, ztmp4
[1218]	2100	!!----------------------------------------------------------------------
[3294]	2101	!
[12489]	2102	isec = ( kt - nit000 ) * NINT( rn_Dt ) ! date of exchanges
[888]	2103
[1218]	2104	zfr_l(:,:) = 1.- fr_i(:,:)
	2105	! ! ------------------------- !
	2106	! ! Surface temperature ! in Kelvin
	2107	! ! ------------------------- !
[3680]	2108	IF( ssnd(jps_toce)%laction .OR. ssnd(jps_tice)%laction .OR. ssnd(jps_tmix)%laction ) THEN
[5407]	2109
[12377]	2110	IF( nn_components == jp_iam_opa ) THEN
	2111	ztmp1(:,:) = ts(:,:,1,jp_tem,Kmm) ! send temperature as it is (potential or conservative) -> use of l_useCT on the received part
[5407]	2112	ELSE
	2113	! we must send the surface potential temperature
[12377]	2114	IF( l_useCT ) THEN ; ztmp1(:,:) = eos_pt_from_ct( ts(:,:,1,jp_tem,Kmm), ts(:,:,1,jp_sal,Kmm) )
	2115	ELSE ; ztmp1(:,:) = ts(:,:,1,jp_tem,Kmm)
[5407]	2116	ENDIF
	2117	!
	2118	SELECT CASE( sn_snd_temp%cldes)
	2119	CASE( 'oce only' ) ; ztmp1(:,:) = ztmp1(:,:) + rt0
[5410]	2120	CASE( 'oce and ice' ) ; ztmp1(:,:) = ztmp1(:,:) + rt0
	2121	SELECT CASE( sn_snd_temp%clcat )
	2122	CASE( 'yes' )
	2123	ztmp3(:,:,1:jpl) = tn_ice(:,:,1:jpl)
	2124	CASE( 'no' )
	2125	WHERE( SUM( a_i, dim=3 ) /= 0. )
	2126	ztmp3(:,:,1) = SUM( tn_ice * a_i, dim=3 ) / SUM( a_i, dim=3 )
	2127	ELSEWHERE
[6121]	2128	ztmp3(:,:,1) = rt0
[5410]	2129	END WHERE
	2130	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%clcat' )
	2131	END SELECT
[5407]	2132	CASE( 'weighted oce and ice' ) ; ztmp1(:,:) = ( ztmp1(:,:) + rt0 ) * zfr_l(:,:)
	2133	SELECT CASE( sn_snd_temp%clcat )
	2134	CASE( 'yes' )
	2135	ztmp3(:,:,1:jpl) = tn_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2136	CASE( 'no' )
	2137	ztmp3(:,:,:) = 0.0
	2138	DO jl=1,jpl
	2139	ztmp3(:,:,1) = ztmp3(:,:,1) + tn_ice(:,:,jl) * a_i(:,:,jl)
	2140	ENDDO
	2141	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%clcat' )
	2142	END SELECT
[12377]	2143	CASE( 'oce and weighted ice') ; ztmp1(:,:) = ts(:,:,1,jp_tem,Kmm) + rt0
[9019]	2144	SELECT CASE( sn_snd_temp%clcat )
	2145	CASE( 'yes' )
	2146	ztmp3(:,:,1:jpl) = tn_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2147	CASE( 'no' )
	2148	ztmp3(:,:,:) = 0.0
	2149	DO jl=1,jpl
	2150	ztmp3(:,:,1) = ztmp3(:,:,1) + tn_ice(:,:,jl) * a_i(:,:,jl)
	2151	ENDDO
	2152	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%clcat' )
	2153	END SELECT
[5407]	2154	CASE( 'mixed oce-ice' )
	2155	ztmp1(:,:) = ( ztmp1(:,:) + rt0 ) * zfr_l(:,:)
[3680]	2156	DO jl=1,jpl
[5407]	2157	ztmp1(:,:) = ztmp1(:,:) + tn_ice(:,:,jl) * a_i(:,:,jl)
[3680]	2158	ENDDO
[5407]	2159	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%cldes' )
[3680]	2160	END SELECT
[5407]	2161	ENDIF
[4990]	2162	IF( ssnd(jps_toce)%laction ) CALL cpl_snd( jps_toce, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
	2163	IF( ssnd(jps_tice)%laction ) CALL cpl_snd( jps_tice, isec, ztmp3, info )
	2164	IF( ssnd(jps_tmix)%laction ) CALL cpl_snd( jps_tmix, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
[3680]	2165	ENDIF
[9019]	2166	!
[1218]	2167	! ! ------------------------- !
[9019]	2168	! ! 1st layer ice/snow temp. !
	2169	! ! ------------------------- !
[9570]	2170	#if defined key_si3
[9019]	2171	! needed by Met Office
	2172	IF( ssnd(jps_ttilyr)%laction) THEN
	2173	SELECT CASE( sn_snd_ttilyr%cldes)
	2174	CASE ('weighted ice')
	2175	ztmp3(:,:,1:jpl) = t1_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2176	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_ttilyr%cldes' )
	2177	END SELECT
	2178	IF( ssnd(jps_ttilyr)%laction ) CALL cpl_snd( jps_ttilyr, isec, ztmp3, info )
	2179	ENDIF
	2180	#endif
	2181	! ! ------------------------- !
[1218]	2182	! ! Albedo !
	2183	! ! ------------------------- !
	2184	IF( ssnd(jps_albice)%laction ) THEN ! ice
[6121]	2185	SELECT CASE( sn_snd_alb%cldes )
	2186	CASE( 'ice' )
	2187	SELECT CASE( sn_snd_alb%clcat )
	2188	CASE( 'yes' )
	2189	ztmp3(:,:,1:jpl) = alb_ice(:,:,1:jpl)
	2190	CASE( 'no' )
	2191	WHERE( SUM( a_i, dim=3 ) /= 0. )
	2192	ztmp1(:,:) = SUM( alb_ice (:,:,1:jpl) * a_i(:,:,1:jpl), dim=3 ) / SUM( a_i(:,:,1:jpl), dim=3 )
	2193	ELSEWHERE
[9019]	2194	ztmp1(:,:) = alb_oce_mix(:,:)
[6121]	2195	END WHERE
	2196	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_alb%clcat' )
	2197	END SELECT
	2198	CASE( 'weighted ice' ) ;
	2199	SELECT CASE( sn_snd_alb%clcat )
	2200	CASE( 'yes' )
	2201	ztmp3(:,:,1:jpl) = alb_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2202	CASE( 'no' )
	2203	WHERE( fr_i (:,:) > 0. )
	2204	ztmp1(:,:) = SUM ( alb_ice(:,:,1:jpl) * a_i(:,:,1:jpl), dim=3 )
	2205	ELSEWHERE
	2206	ztmp1(:,:) = 0.
	2207	END WHERE
	2208	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_ice%clcat' )
	2209	END SELECT
	2210	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_alb%cldes' )
[5410]	2211	END SELECT
[6121]	2212
	2213	SELECT CASE( sn_snd_alb%clcat )
	2214	CASE( 'yes' )
	2215	CALL cpl_snd( jps_albice, isec, ztmp3, info ) !-> MV this has never been checked in coupled mode
	2216	CASE( 'no' )
	2217	CALL cpl_snd( jps_albice, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
	2218	END SELECT
[888]	2219	ENDIF
[6121]	2220
[1218]	2221	IF( ssnd(jps_albmix)%laction ) THEN ! mixed ice-ocean
[9019]	2222	ztmp1(:,:) = alb_oce_mix(:,:) * zfr_l(:,:)
	2223	DO jl = 1, jpl
[3294]	2224	ztmp1(:,:) = ztmp1(:,:) + alb_ice(:,:,jl) * a_i(:,:,jl)
[9019]	2225	END DO
[4990]	2226	CALL cpl_snd( jps_albmix, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
[1218]	2227	ENDIF
	2228	! ! ------------------------- !
	2229	! ! Ice fraction & Thickness !
	2230	! ! ------------------------- !
[5407]	2231	! Send ice fraction field to atmosphere
[3680]	2232	IF( ssnd(jps_fice)%laction ) THEN
	2233	SELECT CASE( sn_snd_thick%clcat )
	2234	CASE( 'yes' ) ; ztmp3(:,:,1:jpl) = a_i(:,:,1:jpl)
	2235	CASE( 'no' ) ; ztmp3(:,:,1 ) = fr_i(:,: )
	2236	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%clcat' )
	2237	END SELECT
[12283]	2238	CALL cpl_snd( jps_fice, isec, ztmp3, info )
[3680]	2239	ENDIF
[9019]	2240
	2241	IF( ssnd(jps_fice1)%laction ) THEN
	2242	SELECT CASE( sn_snd_thick1%clcat )
	2243	CASE( 'yes' ) ; ztmp3(:,:,1:jpl) = a_i(:,:,1:jpl)
	2244	CASE( 'no' ) ; ztmp3(:,:,1 ) = fr_i(:,: )
	2245	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick1%clcat' )
	2246	END SELECT
	2247	CALL cpl_snd( jps_fice1, isec, ztmp3, info )
	2248	ENDIF
[5407]	2249
	2250	! Send ice fraction field to OPA (sent by SAS in SAS-OPA coupling)
	2251	IF( ssnd(jps_fice2)%laction ) THEN
	2252	ztmp3(:,:,1) = fr_i(:,:)
	2253	IF( ssnd(jps_fice2)%laction ) CALL cpl_snd( jps_fice2, isec, ztmp3, info )
	2254	ENDIF
[3294]	2255
	2256	! Send ice and snow thickness field
[3680]	2257	IF( ssnd(jps_hice)%laction .OR. ssnd(jps_hsnw)%laction ) THEN
	2258	SELECT CASE( sn_snd_thick%cldes)
	2259	CASE( 'none' ) ! nothing to do
	2260	CASE( 'weighted ice and snow' )
	2261	SELECT CASE( sn_snd_thick%clcat )
	2262	CASE( 'yes' )
[9019]	2263	ztmp3(:,:,1:jpl) = h_i(:,:,1:jpl) * a_i(:,:,1:jpl)
	2264	ztmp4(:,:,1:jpl) = h_s(:,:,1:jpl) * a_i(:,:,1:jpl)
[3680]	2265	CASE( 'no' )
	2266	ztmp3(:,:,:) = 0.0 ; ztmp4(:,:,:) = 0.0
	2267	DO jl=1,jpl
[9019]	2268	ztmp3(:,:,1) = ztmp3(:,:,1) + h_i(:,:,jl) * a_i(:,:,jl)
	2269	ztmp4(:,:,1) = ztmp4(:,:,1) + h_s(:,:,jl) * a_i(:,:,jl)
[3680]	2270	ENDDO
	2271	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%clcat' )
	2272	END SELECT
	2273	CASE( 'ice and snow' )
[5410]	2274	SELECT CASE( sn_snd_thick%clcat )
	2275	CASE( 'yes' )
[9019]	2276	ztmp3(:,:,1:jpl) = h_i(:,:,1:jpl)
	2277	ztmp4(:,:,1:jpl) = h_s(:,:,1:jpl)
[5410]	2278	CASE( 'no' )
	2279	WHERE( SUM( a_i, dim=3 ) /= 0. )
[9019]	2280	ztmp3(:,:,1) = SUM( h_i * a_i, dim=3 ) / SUM( a_i, dim=3 )
	2281	ztmp4(:,:,1) = SUM( h_s * a_i, dim=3 ) / SUM( a_i, dim=3 )
[5410]	2282	ELSEWHERE
	2283	ztmp3(:,:,1) = 0.
	2284	ztmp4(:,:,1) = 0.
	2285	END WHERE
	2286	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%clcat' )
	2287	END SELECT
[3680]	2288	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%cldes' )
[3294]	2289	END SELECT
[4990]	2290	IF( ssnd(jps_hice)%laction ) CALL cpl_snd( jps_hice, isec, ztmp3, info )
	2291	IF( ssnd(jps_hsnw)%laction ) CALL cpl_snd( jps_hsnw, isec, ztmp4, info )
[3680]	2292	ENDIF
[9019]	2293
[9570]	2294	#if defined key_si3
[1218]	2295	! ! ------------------------- !
[9019]	2296	! ! Ice melt ponds !
	2297	! ! ------------------------- !
[12283]	2298	! needed by Met Office: 1) fraction of ponded ice 2) local/actual pond depth
[9019]	2299	IF( ssnd(jps_a_p)%laction .OR. ssnd(jps_ht_p)%laction ) THEN
	2300	SELECT CASE( sn_snd_mpnd%cldes)
	2301	CASE( 'ice only' )
	2302	SELECT CASE( sn_snd_mpnd%clcat )
	2303	CASE( 'yes' )
[12283]	2304	ztmp3(:,:,1:jpl) = a_ip_frac(:,:,1:jpl)
	2305	ztmp4(:,:,1:jpl) = h_ip(:,:,1:jpl)
[9019]	2306	CASE( 'no' )
	2307	ztmp3(:,:,:) = 0.0
	2308	ztmp4(:,:,:) = 0.0
	2309	DO jl=1,jpl
[12283]	2310	ztmp3(:,:,1) = ztmp3(:,:,1) + a_ip_frac(:,:,jpl)
	2311	ztmp4(:,:,1) = ztmp4(:,:,1) + h_ip(:,:,jpl)
[9019]	2312	ENDDO
	2313	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_mpnd%clcat' )
	2314	END SELECT
	2315	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_mpnd%cldes' )
	2316	END SELECT
	2317	IF( ssnd(jps_a_p)%laction ) CALL cpl_snd( jps_a_p , isec, ztmp3, info )
	2318	IF( ssnd(jps_ht_p)%laction ) CALL cpl_snd( jps_ht_p, isec, ztmp4, info )
	2319	ENDIF
	2320	!
	2321	! ! ------------------------- !
	2322	! ! Ice conductivity !
	2323	! ! ------------------------- !
	2324	! needed by Met Office
	2325	IF( ssnd(jps_kice)%laction ) THEN
	2326	SELECT CASE( sn_snd_cond%cldes)
	2327	CASE( 'weighted ice' )
	2328	SELECT CASE( sn_snd_cond%clcat )
	2329	CASE( 'yes' )
	2330	ztmp3(:,:,1:jpl) = cnd_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
	2331	CASE( 'no' )
	2332	ztmp3(:,:,:) = 0.0
	2333	DO jl=1,jpl
	2334	ztmp3(:,:,1) = ztmp3(:,:,1) + cnd_ice(:,:,jl) * a_i(:,:,jl)
	2335	ENDDO
	2336	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_cond%clcat' )
	2337	END SELECT
	2338	CASE( 'ice only' )
	2339	ztmp3(:,:,1:jpl) = cnd_ice(:,:,1:jpl)
	2340	CASE default ; CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_cond%cldes' )
	2341	END SELECT
	2342	IF( ssnd(jps_kice)%laction ) CALL cpl_snd( jps_kice, isec, ztmp3, info )
	2343	ENDIF
	2344	#endif
	2345
	2346	! ! ------------------------- !
[1534]	2347	! ! CO2 flux from PISCES !
	2348	! ! ------------------------- !
[12377]	2349	IF( ssnd(jps_co2)%laction .AND. l_co2cpl ) THEN
	2350	ztmp1(:,:) = oce_co2(:,:) * 1000. ! conversion in molC/m2/s
	2351	CALL cpl_snd( jps_co2, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ) , info )
	2352	ENDIF
[1534]	2353	!
[3294]	2354	! ! ------------------------- !
[1218]	2355	IF( ssnd(jps_ocx1)%laction ) THEN ! Surface current !
	2356	! ! ------------------------- !
[1467]	2357	!
	2358	! j+1 j -----V---F
[1694]	2359	! surface velocity always sent from T point ! \|
[1467]	2360	! j \| T U
	2361	! \| \|
	2362	! j j-1 -I-------\|
	2363	! (for I) \| \|
	2364	! i-1 i i
	2365	! i i+1 (for I)
[5407]	2366	IF( nn_components == jp_iam_opa ) THEN
[12377]	2367	zotx1(:,:) = uu(:,:,1,Kmm)
	2368	zoty1(:,:) = vv(:,:,1,Kmm)
[5407]	2369	ELSE
	2370	SELECT CASE( TRIM( sn_snd_crt%cldes ) )
	2371	CASE( 'oce only' ) ! C-grid ==> T
[12377]	2372	DO_2D_00_00
	2373	zotx1(ji,jj) = 0.5 * ( uu(ji,jj,1,Kmm) + uu(ji-1,jj ,1,Kmm) )
	2374	zoty1(ji,jj) = 0.5 * ( vv(ji,jj,1,Kmm) + vv(ji ,jj-1,1,Kmm) )
	2375	END_2D
[9767]	2376	CASE( 'weighted oce and ice' ) ! Ocean and Ice on C-grid ==> T
[12377]	2377	DO_2D_00_00
	2378	zotx1(ji,jj) = 0.5 * ( uu (ji,jj,1,Kmm) + uu (ji-1,jj ,1,Kmm) ) * zfr_l(ji,jj)
	2379	zoty1(ji,jj) = 0.5 * ( vv (ji,jj,1,Kmm) + vv (ji ,jj-1,1,Kmm) ) * zfr_l(ji,jj)
	2380	zitx1(ji,jj) = 0.5 * ( u_ice(ji,jj ) + u_ice(ji-1,jj ) ) * fr_i(ji,jj)
	2381	zity1(ji,jj) = 0.5 * ( v_ice(ji,jj ) + v_ice(ji ,jj-1 ) ) * fr_i(ji,jj)
	2382	END_2D
[10425]	2383	CALL lbc_lnk_multi( 'sbccpl', zitx1, 'T', -1., zity1, 'T', -1. )
[9767]	2384	CASE( 'mixed oce-ice' ) ! Ocean and Ice on C-grid ==> T
[12377]	2385	DO_2D_00_00
	2386	zotx1(ji,jj) = 0.5 * ( uu (ji,jj,1,Kmm) + uu (ji-1,jj ,1,Kmm) ) * zfr_l(ji,jj) &
	2387	& + 0.5 * ( u_ice(ji,jj ) + u_ice(ji-1,jj ) ) * fr_i(ji,jj)
	2388	zoty1(ji,jj) = 0.5 * ( vv (ji,jj,1,Kmm) + vv (ji ,jj-1,1,Kmm) ) * zfr_l(ji,jj) &
	2389	& + 0.5 * ( v_ice(ji,jj ) + v_ice(ji ,jj-1 ) ) * fr_i(ji,jj)
	2390	END_2D
[1467]	2391	END SELECT
[10425]	2392	CALL lbc_lnk_multi( 'sbccpl', zotx1, ssnd(jps_ocx1)%clgrid, -1., zoty1, ssnd(jps_ocy1)%clgrid, -1. )
[5407]	2393	!
	2394	ENDIF
[888]	2395	!
[1218]	2396	!
[3294]	2397	IF( TRIM( sn_snd_crt%clvor ) == 'eastward-northward' ) THEN ! Rotation of the components
[1218]	2398	! ! Ocean component
	2399	CALL rot_rep( zotx1, zoty1, ssnd(jps_ocx1)%clgrid, 'ij->e', ztmp1 ) ! 1st component
	2400	CALL rot_rep( zotx1, zoty1, ssnd(jps_ocx1)%clgrid, 'ij->n', ztmp2 ) ! 2nd component
	2401	zotx1(:,:) = ztmp1(:,:) ! overwrite the components
	2402	zoty1(:,:) = ztmp2(:,:)
	2403	IF( ssnd(jps_ivx1)%laction ) THEN ! Ice component
	2404	CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->e', ztmp1 ) ! 1st component
	2405	CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->n', ztmp2 ) ! 2nd component
	2406	zitx1(:,:) = ztmp1(:,:) ! overwrite the components
	2407	zity1(:,:) = ztmp2(:,:)
	2408	ENDIF
	2409	ENDIF
	2410	!
	2411	! spherical coordinates to cartesian -> 2 components to 3 components
[3294]	2412	IF( TRIM( sn_snd_crt%clvref ) == 'cartesian' ) THEN
[1218]	2413	ztmp1(:,:) = zotx1(:,:) ! ocean currents
	2414	ztmp2(:,:) = zoty1(:,:)
[1226]	2415	CALL oce2geo ( ztmp1, ztmp2, 'T', zotx1, zoty1, zotz1 )
[1218]	2416	!
	2417	IF( ssnd(jps_ivx1)%laction ) THEN ! ice velocities
	2418	ztmp1(:,:) = zitx1(:,:)
	2419	ztmp1(:,:) = zity1(:,:)
[1226]	2420	CALL oce2geo ( ztmp1, ztmp2, 'T', zitx1, zity1, zitz1 )
[1218]	2421	ENDIF
	2422	ENDIF
	2423	!
[4990]	2424	IF( ssnd(jps_ocx1)%laction ) CALL cpl_snd( jps_ocx1, isec, RESHAPE ( zotx1, (/jpi,jpj,1/) ), info ) ! ocean x current 1st grid
	2425	IF( ssnd(jps_ocy1)%laction ) CALL cpl_snd( jps_ocy1, isec, RESHAPE ( zoty1, (/jpi,jpj,1/) ), info ) ! ocean y current 1st grid
	2426	IF( ssnd(jps_ocz1)%laction ) CALL cpl_snd( jps_ocz1, isec, RESHAPE ( zotz1, (/jpi,jpj,1/) ), info ) ! ocean z current 1st grid
[1218]	2427	!
[4990]	2428	IF( ssnd(jps_ivx1)%laction ) CALL cpl_snd( jps_ivx1, isec, RESHAPE ( zitx1, (/jpi,jpj,1/) ), info ) ! ice x current 1st grid
	2429	IF( ssnd(jps_ivy1)%laction ) CALL cpl_snd( jps_ivy1, isec, RESHAPE ( zity1, (/jpi,jpj,1/) ), info ) ! ice y current 1st grid
	2430	IF( ssnd(jps_ivz1)%laction ) CALL cpl_snd( jps_ivz1, isec, RESHAPE ( zitz1, (/jpi,jpj,1/) ), info ) ! ice z current 1st grid
[1534]	2431	!
[888]	2432	ENDIF
[2715]	2433	!
[7646]	2434	! ! ------------------------- !
	2435	! ! Surface current to waves !
	2436	! ! ------------------------- !
	2437	IF( ssnd(jps_ocxw)%laction .OR. ssnd(jps_ocyw)%laction ) THEN
	2438	!
	2439	! j+1 j -----V---F
	2440	! surface velocity always sent from T point ! \|
	2441	! j \| T U
	2442	! \| \|
	2443	! j j-1 -I-------\|
	2444	! (for I) \| \|
	2445	! i-1 i i
	2446	! i i+1 (for I)
	2447	SELECT CASE( TRIM( sn_snd_crtw%cldes ) )
	2448	CASE( 'oce only' ) ! C-grid ==> T
[12377]	2449	DO_2D_00_00
	2450	zotx1(ji,jj) = 0.5 * ( uu(ji,jj,1,Kmm) + uu(ji-1,jj ,1,Kmm) )
	2451	zoty1(ji,jj) = 0.5 * ( vv(ji,jj,1,Kmm) + vv(ji , jj-1,1,Kmm) )
	2452	END_2D
[9767]	2453	CASE( 'weighted oce and ice' ) ! Ocean and Ice on C-grid ==> T
[12377]	2454	DO_2D_00_00
	2455	zotx1(ji,jj) = 0.5 * ( uu (ji,jj,1,Kmm) + uu (ji-1,jj ,1,Kmm) ) * zfr_l(ji,jj)
	2456	zoty1(ji,jj) = 0.5 * ( vv (ji,jj,1,Kmm) + vv (ji ,jj-1,1,Kmm) ) * zfr_l(ji,jj)
	2457	zitx1(ji,jj) = 0.5 * ( u_ice(ji,jj ) + u_ice(ji-1,jj ) ) * fr_i(ji,jj)
	2458	zity1(ji,jj) = 0.5 * ( v_ice(ji,jj ) + v_ice(ji ,jj-1 ) ) * fr_i(ji,jj)
	2459	END_2D
[10425]	2460	CALL lbc_lnk_multi( 'sbccpl', zitx1, 'T', -1., zity1, 'T', -1. )
[9767]	2461	CASE( 'mixed oce-ice' ) ! Ocean and Ice on C-grid ==> T
[12377]	2462	DO_2D_00_00
	2463	zotx1(ji,jj) = 0.5 * ( uu (ji,jj,1,Kmm) + uu (ji-1,jj ,1,Kmm) ) * zfr_l(ji,jj) &
	2464	& + 0.5 * ( u_ice(ji,jj ) + u_ice(ji-1,jj ) ) * fr_i(ji,jj)
	2465	zoty1(ji,jj) = 0.5 * ( vv (ji,jj,1,Kmm) + vv (ji ,jj-1,1,Kmm) ) * zfr_l(ji,jj) &
	2466	& + 0.5 * ( v_ice(ji,jj ) + v_ice(ji ,jj-1 ) ) * fr_i(ji,jj)
	2467	END_2D
[9767]	2468	END SELECT
[10425]	2469	CALL lbc_lnk_multi( 'sbccpl', zotx1, ssnd(jps_ocxw)%clgrid, -1., zoty1, ssnd(jps_ocyw)%clgrid, -1. )
[7646]	2470	!
	2471	!
	2472	IF( TRIM( sn_snd_crtw%clvor ) == 'eastward-northward' ) THEN ! Rotation of the components
	2473	! ! Ocean component
	2474	CALL rot_rep( zotx1, zoty1, ssnd(jps_ocxw)%clgrid, 'ij->e', ztmp1 ) ! 1st component
	2475	CALL rot_rep( zotx1, zoty1, ssnd(jps_ocxw)%clgrid, 'ij->n', ztmp2 ) ! 2nd component
	2476	zotx1(:,:) = ztmp1(:,:) ! overwrite the components
	2477	zoty1(:,:) = ztmp2(:,:)
	2478	IF( ssnd(jps_ivx1)%laction ) THEN ! Ice component
	2479	CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->e', ztmp1 ) ! 1st component
	2480	CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->n', ztmp2 ) ! 2nd component
	2481	zitx1(:,:) = ztmp1(:,:) ! overwrite the components
	2482	zity1(:,:) = ztmp2(:,:)
	2483	ENDIF
	2484	ENDIF
	2485	!
	2486	! ! spherical coordinates to cartesian -> 2 components to 3 components
	2487	! IF( TRIM( sn_snd_crtw%clvref ) == 'cartesian' ) THEN
	2488	! ztmp1(:,:) = zotx1(:,:) ! ocean currents
	2489	! ztmp2(:,:) = zoty1(:,:)
	2490	! CALL oce2geo ( ztmp1, ztmp2, 'T', zotx1, zoty1, zotz1 )
	2491	! !
	2492	! IF( ssnd(jps_ivx1)%laction ) THEN ! ice velocities
	2493	! ztmp1(:,:) = zitx1(:,:)
	2494	! ztmp1(:,:) = zity1(:,:)
	2495	! CALL oce2geo ( ztmp1, ztmp2, 'T', zitx1, zity1, zitz1 )
	2496	! ENDIF
	2497	! ENDIF
	2498	!
	2499	IF( ssnd(jps_ocxw)%laction ) CALL cpl_snd( jps_ocxw, isec, RESHAPE ( zotx1, (/jpi,jpj,1/) ), info ) ! ocean x current 1st grid
	2500	IF( ssnd(jps_ocyw)%laction ) CALL cpl_snd( jps_ocyw, isec, RESHAPE ( zoty1, (/jpi,jpj,1/) ), info ) ! ocean y current 1st grid
	2501	!
	2502	ENDIF
	2503	!
	2504	IF( ssnd(jps_ficet)%laction ) THEN
	2505	CALL cpl_snd( jps_ficet, isec, RESHAPE ( fr_i, (/jpi,jpj,1/) ), info )
[12377]	2506	ENDIF
[7646]	2507	! ! ------------------------- !
	2508	! ! Water levels to waves !
	2509	! ! ------------------------- !
	2510	IF( ssnd(jps_wlev)%laction ) THEN
	2511	IF( ln_apr_dyn ) THEN
	2512	IF( kt /= nit000 ) THEN
[12377]	2513	ztmp1(:,:) = ssh(:,:,Kbb) - 0.5 * ( ssh_ib(:,:) + ssh_ibb(:,:) )
[7646]	2514	ELSE
[12377]	2515	ztmp1(:,:) = ssh(:,:,Kbb)
[7646]	2516	ENDIF
	2517	ELSE
[12377]	2518	ztmp1(:,:) = ssh(:,:,Kmm)
[7646]	2519	ENDIF
	2520	CALL cpl_snd( jps_wlev , isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
[12377]	2521	ENDIF
[5407]	2522	!
	2523	! Fields sent by OPA to SAS when doing OPA<->SAS coupling
	2524	! ! SSH
	2525	IF( ssnd(jps_ssh )%laction ) THEN
	2526	! ! removed inverse barometer ssh when Patm
	2527	! forcing is used (for sea-ice dynamics)
[12377]	2528	IF( ln_apr_dyn ) THEN ; ztmp1(:,:) = ssh(:,:,Kbb) - 0.5 * ( ssh_ib(:,:) + ssh_ibb(:,:) )
	2529	ELSE ; ztmp1(:,:) = ssh(:,:,Kmm)
[5407]	2530	ENDIF
	2531	CALL cpl_snd( jps_ssh , isec, RESHAPE ( ztmp1 , (/jpi,jpj,1/) ), info )
	2532
	2533	ENDIF
	2534	! ! SSS
	2535	IF( ssnd(jps_soce )%laction ) THEN
[12377]	2536	CALL cpl_snd( jps_soce , isec, RESHAPE ( ts(:,:,1,jp_sal,Kmm), (/jpi,jpj,1/) ), info )
[5407]	2537	ENDIF
	2538	! ! first T level thickness
	2539	IF( ssnd(jps_e3t1st )%laction ) THEN
[12377]	2540	CALL cpl_snd( jps_e3t1st, isec, RESHAPE ( e3t(:,:,1,Kmm) , (/jpi,jpj,1/) ), info )
[5407]	2541	ENDIF
	2542	! ! Qsr fraction
	2543	IF( ssnd(jps_fraqsr)%laction ) THEN
	2544	CALL cpl_snd( jps_fraqsr, isec, RESHAPE ( fraqsr_1lev(:,:) , (/jpi,jpj,1/) ), info )
	2545	ENDIF
	2546	!
	2547	! Fields sent by SAS to OPA when OASIS coupling
	2548	! ! Solar heat flux
	2549	IF( ssnd(jps_qsroce)%laction ) CALL cpl_snd( jps_qsroce, isec, RESHAPE ( qsr , (/jpi,jpj,1/) ), info )
	2550	IF( ssnd(jps_qnsoce)%laction ) CALL cpl_snd( jps_qnsoce, isec, RESHAPE ( qns , (/jpi,jpj,1/) ), info )
	2551	IF( ssnd(jps_oemp )%laction ) CALL cpl_snd( jps_oemp , isec, RESHAPE ( emp , (/jpi,jpj,1/) ), info )
	2552	IF( ssnd(jps_sflx )%laction ) CALL cpl_snd( jps_sflx , isec, RESHAPE ( sfx , (/jpi,jpj,1/) ), info )
	2553	IF( ssnd(jps_otx1 )%laction ) CALL cpl_snd( jps_otx1 , isec, RESHAPE ( utau, (/jpi,jpj,1/) ), info )
	2554	IF( ssnd(jps_oty1 )%laction ) CALL cpl_snd( jps_oty1 , isec, RESHAPE ( vtau, (/jpi,jpj,1/) ), info )
	2555	IF( ssnd(jps_rnf )%laction ) CALL cpl_snd( jps_rnf , isec, RESHAPE ( rnf , (/jpi,jpj,1/) ), info )
	2556	IF( ssnd(jps_taum )%laction ) CALL cpl_snd( jps_taum , isec, RESHAPE ( taum, (/jpi,jpj,1/) ), info )
	2557
[9570]	2558	#if defined key_si3
[9019]	2559	! ! ------------------------- !
	2560	! ! Sea surface freezing temp !
	2561	! ! ------------------------- !
	2562	! needed by Met Office
[12377]	2563	CALL eos_fzp(ts(:,:,1,jp_sal,Kmm), sstfrz)
[9019]	2564	ztmp1(:,:) = sstfrz(:,:) + rt0
	2565	IF( ssnd(jps_sstfrz)%laction ) CALL cpl_snd( jps_sstfrz, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info)
	2566	#endif
[2715]	2567	!
[1226]	2568	END SUBROUTINE sbc_cpl_snd
[1218]	2569
[888]	2570	!!======================================================================
	2571	END MODULE sbccpl

Note: See TracBrowser for help on using the repository browser.

Download in other formats: