New URL for NEMO forge! http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.

nemogcm.F90 in branches/2011/dev_NEMO_MERGE_2011/NEMOGCM/NEMO/OPA_SRC – NEMO

Context Navigation

source: branches/2011/dev_NEMO_MERGE_2011/NEMOGCM/NEMO/OPA_SRC/nemogcm.F90 @ 3181

Last change on this file since 3181 was 3161, checked in by cetlod, 13 years ago
New dynamical allocation & timing in OPA_SRC/DYN routines
Property svn:keywords set to `Id`
File size: 35.8 KB

Line
1	MODULE nemogcm
2	!!======================================================================
3	!! * MODULE nemogcm *
4	!! Ocean system : NEMO GCM (ocean dynamics, on-line tracers, biochemistry and sea-ice)
5	!!======================================================================
6	!! History : OPA ! 1990-10 (C. Levy, G. Madec) Original code
7	!! 7.0 ! 1991-11 (M. Imbard, C. Levy, G. Madec)
8	!! 7.1 ! 1993-03 (M. Imbard, C. Levy, G. Madec, O. Marti, M. Guyon, A. Lazar,
9	!! P. Delecluse, C. Perigaud, G. Caniaux, B. Colot, C. Maes) release 7.1
10	!! - ! 1992-06 (L.Terray) coupling implementation
11	!! - ! 1993-11 (M.A. Filiberti) IGLOO sea-ice
12	!! 8.0 ! 1996-03 (M. Imbard, C. Levy, G. Madec, O. Marti, M. Guyon, A. Lazar,
13	!! P. Delecluse, L.Terray, M.A. Filiberti, J. Vialar, A.M. Treguier, M. Levy) release 8.0
14	!! 8.1 ! 1997-06 (M. Imbard, G. Madec)
15	!! 8.2 ! 1999-11 (M. Imbard, H. Goosse) LIM sea-ice model
16	!! ! 1999-12 (V. Thierry, A-M. Treguier, M. Imbard, M-A. Foujols) OPEN-MP
17	!! ! 2000-07 (J-M Molines, M. Imbard) Open Boundary Conditions (CLIPPER)
18	!! NEMO 1.0 ! 2002-08 (G. Madec) F90: Free form and modules
19	!! - ! 2004-06 (R. Redler, NEC CCRLE, Germany) add OASIS[3/4] coupled interfaces
20	!! - ! 2004-08 (C. Talandier) New trends organization
21	!! - ! 2005-06 (C. Ethe) Add the 1D configuration possibility
22	!! - ! 2005-11 (V. Garnier) Surface pressure gradient organization
23	!! - ! 2006-03 (L. Debreu, C. Mazauric) Agrif implementation
24	!! - ! 2006-04 (G. Madec, R. Benshila) Step reorganization
25	!! - ! 2007-07 (J. Chanut, A. Sellar) Unstructured open boundaries (BDY)
26	!! 3.2 ! 2009-08 (S. Masson) open/write in the listing file in mpp
27	!! 3.3 ! 2010-05 (K. Mogensen, A. Weaver, M. Martin, D. Lea) Assimilation interface
28	!! - ! 2010-10 (C. Ethe, G. Madec) reorganisation of initialisation phase
29	!! 3.3.1! 2011-01 (A. R. Porter, STFC Daresbury) dynamical allocation
30	!! 3.4 ! 2011-11 (C. Harris) decomposition changes for running with CICE
31	!!----------------------------------------------------------------------
32
33	!!----------------------------------------------------------------------
34	!! nemo_gcm : solve ocean dynamics, tracer, biogeochemistry and/or sea-ice
35	!! nemo_init : initialization of the NEMO system
36	!! nemo_ctl : initialisation of the contol print
37	!! nemo_closefile : close remaining open files
38	!! nemo_alloc : dynamical allocation
39	!! nemo_partition : calculate MPP domain decomposition
40	!! factorise : calculate the factors of the no. of MPI processes
41	!!----------------------------------------------------------------------
42	USE step_oce ! module used in the ocean time stepping module
43	USE sbc_oce ! surface boundary condition: ocean
44	USE cla ! cross land advection (tra_cla routine)
45	USE domcfg ! domain configuration (dom_cfg routine)
46	USE mppini ! shared/distributed memory setting (mpp_init routine)
47	USE domain ! domain initialization (dom_init routine)
48	USE obcini ! open boundary cond. initialization (obc_ini routine)
49	USE bdyini ! open boundary cond. initialization (bdy_init routine)
50	USE bdydta ! open boundary cond. initialization (bdy_dta_init routine)
51	USE bdytides ! open boundary cond. initialization (tide_init routine)
52	USE istate ! initial state setting (istate_init routine)
53	USE ldfdyn ! lateral viscosity setting (ldfdyn_init routine)
54	USE ldftra ! lateral diffusivity setting (ldftra_init routine)
55	USE zdfini ! vertical physics setting (zdf_init routine)
56	USE phycst ! physical constant (par_cst routine)
57	USE trdmod ! momentum/tracers trends (trd_mod_init routine)
58	USE asmtrj ! writing out state trajectory
59	USE diaptr ! poleward transports (dia_ptr_init routine)
60	USE diadct ! sections transports (dia_dct_init routine)
61	USE diaobs ! Observation diagnostics (dia_obs_init routine)
62	USE step ! NEMO time-stepping (stp routine)
63	#if defined key_oasis3
64	USE cpl_oasis3 ! OASIS3 coupling
65	#elif defined key_oasis4
66	USE cpl_oasis4 ! OASIS4 coupling (not working)
67	#endif
68	USE c1d ! 1D configuration
69	USE step_c1d ! Time stepping loop for the 1D configuration
70	#if defined key_top
71	USE trcini ! passive tracer initialisation
72	#endif
73	USE lib_mpp ! distributed memory computing
74	#if defined key_iomput
75	USE mod_ioclient
76	#endif
77
78	IMPLICIT NONE
79	PRIVATE
80
81	PUBLIC nemo_gcm ! called by model.F90
82	PUBLIC nemo_init ! needed by AGRIF
83
84	CHARACTER(lc) :: cform_aaa="( /, 'AAAAAAAA', / ) " ! flag for output listing
85
86	!!----------------------------------------------------------------------
87	!! NEMO/OPA 4.0 , NEMO Consortium (2011)
88	!! $Id$
89	!! Software governed by the CeCILL licence (NEMOGCM/NEMO_CeCILL.txt)
90	!!----------------------------------------------------------------------
91	CONTAINS
92
93	SUBROUTINE nemo_gcm
94	!!----------------------------------------------------------------------
95	!! * ROUTINE nemo_gcm *
96	!!
97	!! ** Purpose : NEMO solves the primitive equations on an orthogonal
98	!! curvilinear mesh on the sphere.
99	!!
100	!! ** Method : - model general initialization
101	!! - launch the time-stepping (stp routine)
102	!! - finalize the run by closing files and communications
103	!!
104	!! References : Madec, Delecluse, Imbard, and Levy, 1997: internal report, IPSL.
105	!! Madec, 2008, internal report, IPSL.
106	!!----------------------------------------------------------------------
107	INTEGER :: istp ! time step index
108	!!----------------------------------------------------------------------
109	!
110	#if defined key_agrif
111	CALL Agrif_Init_Grids() ! AGRIF: set the meshes
112	#endif
113
114	! !-----------------------!
115	CALL nemo_init !== Initialisations ==!
116	! !-----------------------!
117	#if defined key_agrif
118	CALL Agrif_Declare_Var ! AGRIF: set the meshes
119	# if defined key_top
120	CALL Agrif_Declare_Var_Top ! AGRIF: set the meshes
121	# endif
122	#endif
123	! check that all process are still there... If some process have an error,
124	! they will never enter in step and other processes will wait until the end of the cpu time!
125	IF( lk_mpp ) CALL mpp_max( nstop )
126
127	IF(lwp) WRITE(numout,cform_aaa) ! Flag AAAAAAA
128
129	! !-----------------------!
130	! !== time stepping ==!
131	! !-----------------------!
132	istp = nit000
133	#if defined key_c1d
134	DO WHILE ( istp <= nitend .AND. nstop == 0 )
135	CALL stp_c1d( istp )
136	istp = istp + 1
137	END DO
138	#else
139	IF( lk_asminc ) THEN
140	IF( ln_bkgwri ) CALL asm_bkg_wri( nit000 - 1 ) ! Output background fields
141	IF( ln_trjwri ) CALL asm_trj_wri( nit000 - 1 ) ! Output trajectory fields
142	IF( ln_asmdin ) THEN ! Direct initialization
143	IF( ln_trainc ) CALL tra_asm_inc( nit000 - 1 ) ! Tracers
144	IF( ln_dyninc ) THEN
145	CALL dyn_asm_inc( nit000 - 1 ) ! Dynamics
146	IF ( ln_asmdin ) CALL ssh_wzv ( nit000 - 1 ) ! update vertical velocity
147	ENDIF
148	IF( ln_sshinc ) CALL ssh_asm_inc( nit000 - 1 ) ! SSH
149	ENDIF
150	ENDIF
151
152	DO WHILE ( istp <= nitend .AND. nstop == 0 )
153	#if defined key_agrif
154	CALL Agrif_Step( stp ) ! AGRIF: time stepping
155	#else
156	CALL stp( istp ) ! standard time stepping
157	#endif
158	istp = istp + 1
159	IF( lk_mpp ) CALL mpp_max( nstop )
160	END DO
161	#endif
162
163	IF( lk_diaobs ) CALL dia_obs_wri
164
165	! !------------------------!
166	! !== finalize the run ==!
167	! !------------------------!
168	IF(lwp) WRITE(numout,cform_aaa) ! Flag AAAAAAA
169	!
170	IF( nstop /= 0 .AND. lwp ) THEN ! error print
171	WRITE(numout,cform_err)
172	WRITE(numout,*) nstop, ' error have been found'
173	ENDIF
174	!
175	IF( nn_timing == 1 ) CALL timing_finalize
176	!
177	CALL nemo_closefile
178	#if defined key_oasis3 \|\| defined key_oasis4
179	CALL cpl_prism_finalize ! end coupling and mpp communications with OASIS
180	#else
181	IF( lk_mpp ) CALL mppstop ! end mpp communications
182	#endif
183	!
184	END SUBROUTINE nemo_gcm
185
186
187	SUBROUTINE nemo_init
188	!!----------------------------------------------------------------------
189	!! * ROUTINE nemo_init *
190	!!
191	!! ** Purpose : initialization of the NEMO GCM
192	!!----------------------------------------------------------------------
193	INTEGER :: ji ! dummy loop indices
194	INTEGER :: ilocal_comm ! local integer
195	CHARACTER(len=80), DIMENSION(16) :: cltxt
196	!!
197	NAMELIST/namctl/ ln_ctl , nn_print, nn_ictls, nn_ictle, &
198	& nn_isplt, nn_jsplt, nn_jctls, nn_jctle, &
199	& nn_bench, nn_timing
200	!!----------------------------------------------------------------------
201	!
202	cltxt = ''
203	!
204	! ! open Namelist file
205	CALL ctl_opn( numnam, 'namelist', 'OLD', 'FORMATTED', 'SEQUENTIAL', -1, 6, .FALSE. )
206	!
207	READ( numnam, namctl ) ! Namelist namctl : Control prints & Benchmark
208	!
209	! !--------------------------------------------!
210	! ! set communicator & select the local node !
211	! !--------------------------------------------!
212	#if defined key_iomput
213	IF( Agrif_Root() ) THEN
214	# if defined key_oasis3 \|\| defined key_oasis4
215	CALL cpl_prism_init( ilocal_comm ) ! nemo local communicator given by oasis
216	# endif
217	CALL init_ioclient( ilocal_comm ) ! exchange io_server nemo local communicator with the io_server
218	ENDIF
219	narea = mynode( cltxt, numnam, nstop, ilocal_comm ) ! Nodes selection
220	#else
221	# if defined key_oasis3 \|\| defined key_oasis4
222	IF( Agrif_Root() ) THEN
223	CALL cpl_prism_init( ilocal_comm ) ! nemo local communicator given by oasis
224	ENDIF
225	narea = mynode( cltxt, numnam, nstop, ilocal_comm ) ! Nodes selection (control print return in cltxt)
226	# else
227	ilocal_comm = 0
228	narea = mynode( cltxt, numnam, nstop ) ! Nodes selection (control print return in cltxt)
229	# endif
230	#endif
231	narea = narea + 1 ! mynode return the rank of proc (0 --> jpnij -1 )
232
233	lwp = (narea == 1) .OR. ln_ctl ! control of all listing output print
234
235	! If dimensions of processor grid weren't specified in the namelist file
236	! then we calculate them here now that we have our communicator size
237	IF( (jpni < 1) .OR. (jpnj < 1) )THEN
238	#if defined key_mpp_mpi
239	IF( Agrif_Root() ) CALL nemo_partition(mppsize)
240	#else
241	jpni = 1
242	jpnj = 1
243	jpnij = jpni*jpnj
244	#endif
245	END IF
246
247	! Calculate domain dimensions given calculated jpni and jpnj
248	! This used to be done in par_oce.F90 when they were parameters rather
249	! than variables
250	IF( Agrif_Root() ) THEN
251	jpi = ( jpiglo-2jpreci + (jpni-1) ) / jpni + 2jpreci ! first dim.
252	#if defined key_nemocice_decomp
253	jpj = ( jpjglo+1-2jprecj + (jpnj-1) ) / jpnj + 2jprecj ! second dim.
254	#else
255	jpj = ( jpjglo-2jprecj + (jpnj-1) ) / jpnj + 2jprecj ! second dim.
256	#endif
257	jpk = jpkdta ! third dim
258	jpim1 = jpi-1 ! inner domain indices
259	jpjm1 = jpj-1 ! " "
260	jpkm1 = jpk-1 ! " "
261	jpij = jpi*jpj ! jpi x j
262	ENDIF
263
264	IF(lwp) THEN ! open listing units
265	!
266	CALL ctl_opn( numout, 'ocean.output', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, 6, .FALSE., narea )
267	!
268	WRITE(numout,*)
269	WRITE(numout,*) ' CNRS - NERC - Met OFFICE - MERCATOR-ocean'
270	WRITE(numout,*) ' NEMO team'
271	WRITE(numout,*) ' Ocean General Circulation Model'
272	WRITE(numout,*) ' version 3.3 (2010) '
273	WRITE(numout,*)
274	WRITE(numout,*)
275	DO ji = 1, SIZE(cltxt)
276	IF( TRIM(cltxt(ji)) /= '' ) WRITE(numout,*) cltxt(ji) ! control print of mynode
277	END DO
278	WRITE(numout,cform_aaa) ! Flag AAAAAAA
279	!
280	ENDIF
281
282	! Now we know the dimensions of the grid and numout has been set we can
283	! allocate arrays
284	CALL nemo_alloc()
285
286	! !-------------------------------!
287	! ! NEMO general initialization !
288	! !-------------------------------!
289
290	CALL nemo_ctl ! Control prints & Benchmark
291
292	! ! Domain decomposition
293	IF( jpni*jpnj == jpnij ) THEN ; CALL mpp_init ! standard cutting out
294	ELSE ; CALL mpp_init2 ! eliminate land processors
295	ENDIF
296	!
297	IF( nn_timing == 1 ) CALL timing_init
298	!
299	! ! General initialization
300	CALL phy_cst ! Physical constants
301	CALL eos_init ! Equation of state
302	CALL dom_cfg ! Domain configuration
303	CALL dom_init ! Domain
304
305	IF( ln_nnogather ) CALL nemo_northcomms ! Initialise the northfold neighbour lists (must be done after the masks are defined)
306
307	IF( ln_ctl ) CALL prt_ctl_init ! Print control
308
309	IF( lk_obc ) CALL obc_init ! Open boundaries
310	IF( lk_bdy ) CALL bdy_init ! Open boundaries initialisation
311	IF( lk_bdy ) CALL bdy_dta_init ! Open boundaries initialisation of external data arrays
312	IF( lk_bdy ) CALL tide_init ! Open boundaries initialisation of tidal harmonic forcing
313
314	CALL flush(numout)
315	CALL dyn_nept_init ! simplified form of Neptune effect
316	CALL flush(numout)
317
318	CALL istate_init ! ocean initial state (Dynamics and tracers)
319
320	! ! Ocean physics
321	CALL sbc_init ! Forcings : surface module
322	! ! Vertical physics
323	CALL zdf_init ! namelist read
324	CALL zdf_bfr_init ! bottom friction
325	IF( lk_zdfric ) CALL zdf_ric_init ! Richardson number dependent Kz
326	IF( lk_zdftke ) CALL zdf_tke_init ! TKE closure scheme
327	IF( lk_zdfgls ) CALL zdf_gls_init ! GLS closure scheme
328	IF( lk_zdfkpp ) CALL zdf_kpp_init ! KPP closure scheme
329	IF( lk_zdftmx ) CALL zdf_tmx_init ! tidal vertical mixing
330	IF( lk_zdfddm .AND. .NOT. lk_zdfkpp ) &
331	& CALL zdf_ddm_init ! double diffusive mixing
332	! ! Lateral physics
333	CALL ldf_tra_init ! Lateral ocean tracer physics
334	CALL ldf_dyn_init ! Lateral ocean momentum physics
335	IF( lk_ldfslp ) CALL ldf_slp_init ! slope of lateral mixing
336
337	! ! Active tracers
338	CALL tra_qsr_init ! penetrative solar radiation qsr
339	CALL tra_bbc_init ! bottom heat flux
340	IF( lk_trabbl ) CALL tra_bbl_init ! advective (and/or diffusive) bottom boundary layer scheme
341	IF( ln_tradmp ) CALL tra_dmp_init ! internal damping trends
342	CALL tra_adv_init ! horizontal & vertical advection
343	CALL tra_ldf_init ! lateral mixing
344	CALL tra_zdf_init ! vertical mixing and after tracer fields
345
346	! ! Dynamics
347	CALL dyn_adv_init ! advection (vector or flux form)
348	CALL dyn_vor_init ! vorticity term including Coriolis
349	CALL dyn_ldf_init ! lateral mixing
350	CALL dyn_hpg_init ! horizontal gradient of Hydrostatic pressure
351	CALL dyn_zdf_init ! vertical diffusion
352	CALL dyn_spg_init ! surface pressure gradient
353
354	! ! Misc. options
355	IF( nn_cla == 1 ) CALL cla_init ! Cross Land Advection
356
357	#if defined key_top
358	! ! Passive tracers
359	CALL trc_init
360	#endif
361	! ! Diagnostics
362	IF( lk_floats ) CALL flo_init ! drifting Floats
363	CALL iom_init ! iom_put initialization
364	IF( lk_diaar5 ) CALL dia_ar5_init ! ar5 diag
365	CALL dia_ptr_init ! Poleward TRansports initialization
366	IF( lk_diadct ) CALL dia_dct_init ! Sections tranports
367	CALL dia_hsb_init ! heat content, salt content and volume budgets
368	CALL trd_mod_init ! Mixed-layer/Vorticity/Integral constraints trends
369	IF( lk_diaobs ) THEN ! Observation & model comparison
370	CALL dia_obs_init ! Initialize observational data
371	CALL dia_obs( nit000 - 1 ) ! Observation operator for restart
372	ENDIF
373	! ! Assimilation increments
374	IF( lk_asminc ) CALL asm_inc_init ! Initialize assimilation increments
375	IF(lwp) WRITE(numout,*) 'Euler time step switch is ', neuler
376	!
377	END SUBROUTINE nemo_init
378
379
380	SUBROUTINE nemo_ctl
381	!!----------------------------------------------------------------------
382	!! * ROUTINE nemo_ctl *
383	!!
384	!! ** Purpose : control print setting
385	!!
386	!! ** Method : - print namctl information and check some consistencies
387	!!----------------------------------------------------------------------
388	!
389	IF(lwp) THEN ! control print
390	WRITE(numout,*)
391	WRITE(numout,*) 'nemo_ctl: Control prints & Benchmark'
392	WRITE(numout,*) '~~~~~~~ '
393	WRITE(numout,*) ' Namelist namctl'
394	WRITE(numout,*) ' run control (for debugging) ln_ctl = ', ln_ctl
395	WRITE(numout,*) ' level of print nn_print = ', nn_print
396	WRITE(numout,*) ' Start i indice for SUM control nn_ictls = ', nn_ictls
397	WRITE(numout,*) ' End i indice for SUM control nn_ictle = ', nn_ictle
398	WRITE(numout,*) ' Start j indice for SUM control nn_jctls = ', nn_jctls
399	WRITE(numout,*) ' End j indice for SUM control nn_jctle = ', nn_jctle
400	WRITE(numout,*) ' number of proc. following i nn_isplt = ', nn_isplt
401	WRITE(numout,*) ' number of proc. following j nn_jsplt = ', nn_jsplt
402	WRITE(numout,*) ' benchmark parameter (0/1) nn_bench = ', nn_bench
403	ENDIF
404	!
405	nprint = nn_print ! convert DOCTOR namelist names into OLD names
406	nictls = nn_ictls
407	nictle = nn_ictle
408	njctls = nn_jctls
409	njctle = nn_jctle
410	isplt = nn_isplt
411	jsplt = nn_jsplt
412	nbench = nn_bench
413	! ! Parameter control
414	!
415	IF( ln_ctl ) THEN ! sub-domain area indices for the control prints
416	IF( lk_mpp ) THEN
417	isplt = jpni ; jsplt = jpnj ; ijsplt = jpni*jpnj ! the domain is forced to the real split domain
418	ELSE
419	IF( isplt == 1 .AND. jsplt == 1 ) THEN
420	CALL ctl_warn( ' - isplt & jsplt are equal to 1', &
421	& ' - the print control will be done over the whole domain' )
422	ENDIF
423	ijsplt = isplt * jsplt ! total number of processors ijsplt
424	ENDIF
425	IF(lwp) WRITE(numout,*)' - The total number of processors over which the'
426	IF(lwp) WRITE(numout,*)' print control will be done is ijsplt : ', ijsplt
427	!
428	! ! indices used for the SUM control
429	IF( nictls+nictle+njctls+njctle == 0 ) THEN ! print control done over the default area
430	lsp_area = .FALSE.
431	ELSE ! print control done over a specific area
432	lsp_area = .TRUE.
433	IF( nictls < 1 .OR. nictls > jpiglo ) THEN
434	CALL ctl_warn( ' - nictls must be 1<=nictls>=jpiglo, it is forced to 1' )
435	nictls = 1
436	ENDIF
437	IF( nictle < 1 .OR. nictle > jpiglo ) THEN
438	CALL ctl_warn( ' - nictle must be 1<=nictle>=jpiglo, it is forced to jpiglo' )
439	nictle = jpiglo
440	ENDIF
441	IF( njctls < 1 .OR. njctls > jpjglo ) THEN
442	CALL ctl_warn( ' - njctls must be 1<=njctls>=jpjglo, it is forced to 1' )
443	njctls = 1
444	ENDIF
445	IF( njctle < 1 .OR. njctle > jpjglo ) THEN
446	CALL ctl_warn( ' - njctle must be 1<=njctle>=jpjglo, it is forced to jpjglo' )
447	njctle = jpjglo
448	ENDIF
449	ENDIF
450	ENDIF
451	!
452	IF( nbench == 1 ) THEN ! Benchmark
453	SELECT CASE ( cp_cfg )
454	CASE ( 'gyre' ) ; CALL ctl_warn( ' The Benchmark is activated ' )
455	CASE DEFAULT ; CALL ctl_stop( ' The Benchmark is based on the GYRE configuration:', &
456	& ' key_gyre must be used or set nbench = 0' )
457	END SELECT
458	ENDIF
459	!
460	IF( lk_c1d .AND. .NOT.lk_iomput ) CALL ctl_stop( 'nemo_ctl: The 1D configuration must be used ', &
461	& 'with the IOM Input/Output manager. ' , &
462	& 'Compile with key_iomput enabled' )
463	!
464	END SUBROUTINE nemo_ctl
465
466
467	SUBROUTINE nemo_closefile
468	!!----------------------------------------------------------------------
469	!! * ROUTINE nemo_closefile *
470	!!
471	!! ** Purpose : Close the files
472	!!----------------------------------------------------------------------
473	!
474	IF( lk_mpp ) CALL mppsync
475	!
476	CALL iom_close ! close all input/output files managed by iom_*
477	!
478	IF( numstp /= -1 ) CLOSE( numstp ) ! time-step file
479	IF( numsol /= -1 ) CLOSE( numsol ) ! solver file
480	IF( numnam /= -1 ) CLOSE( numnam ) ! oce namelist
481	IF( numnam_ice /= -1 ) CLOSE( numnam_ice ) ! ice namelist
482	IF( numevo_ice /= -1 ) CLOSE( numevo_ice ) ! ice variables (temp. evolution)
483	IF( numout /= 6 ) CLOSE( numout ) ! standard model output file
484	IF( numdct_vol /= -1 ) CLOSE( numdct_vol ) ! volume transports
485	IF( numdct_heat /= -1 ) CLOSE( numdct_heat ) ! heat transports
486	IF( numdct_salt /= -1 ) CLOSE( numdct_salt ) ! salt transports
487
488	!
489	numout = 6 ! redefine numout in case it is used after this point...
490	!
491	END SUBROUTINE nemo_closefile
492
493
494	SUBROUTINE nemo_alloc
495	!!----------------------------------------------------------------------
496	!! * ROUTINE nemo_alloc *
497	!!
498	!! ** Purpose : Allocate all the dynamic arrays of the OPA modules
499	!!
500	!! ** Method :
501	!!----------------------------------------------------------------------
502	USE diawri , ONLY: dia_wri_alloc
503	USE dom_oce , ONLY: dom_oce_alloc
504	USE ldfdyn_oce, ONLY: ldfdyn_oce_alloc
505	USE ldftra_oce, ONLY: ldftra_oce_alloc
506	USE trc_oce , ONLY: trc_oce_alloc
507	USE wrk_nemo , ONLY: wrk_alloc
508	!
509	INTEGER :: ierr
510	!!----------------------------------------------------------------------
511	!
512	ierr = oce_alloc () ! ocean
513	ierr = ierr + dia_wri_alloc ()
514	ierr = ierr + dom_oce_alloc () ! ocean domain
515	ierr = ierr + ldfdyn_oce_alloc() ! ocean lateral physics : dynamics
516	ierr = ierr + ldftra_oce_alloc() ! ocean lateral physics : tracers
517	ierr = ierr + zdf_oce_alloc () ! ocean vertical physics
518	!
519	ierr = ierr + lib_mpp_alloc (numout) ! mpp exchanges
520	ierr = ierr + trc_oce_alloc () ! shared TRC / TRA arrays
521	!
522	ierr = ierr + wrk_alloc(numout, lwp) ! workspace
523	!
524	IF( lk_mpp ) CALL mpp_sum( ierr )
525	IF( ierr /= 0 ) CALL ctl_stop( 'STOP', 'nemo_alloc : unable to allocate standard ocean arrays' )
526	!
527	END SUBROUTINE nemo_alloc
528
529
530	SUBROUTINE nemo_partition( num_pes )
531	!!----------------------------------------------------------------------
532	!! * ROUTINE nemo_partition *
533	!!
534	!! ** Purpose :
535	!!
536	!! ** Method :
537	!!----------------------------------------------------------------------
538	INTEGER, INTENT(in) :: num_pes ! The number of MPI processes we have
539	!
540	INTEGER, PARAMETER :: nfactmax = 20
541	INTEGER :: nfact ! The no. of factors returned
542	INTEGER :: ierr ! Error flag
543	INTEGER :: ji
544	INTEGER :: idiff, mindiff, imin ! For choosing pair of factors that are closest in value
545	INTEGER, DIMENSION(nfactmax) :: ifact ! Array of factors
546	!!----------------------------------------------------------------------
547
548	ierr = 0
549
550	CALL factorise( ifact, nfactmax, nfact, num_pes, ierr )
551
552	IF( nfact <= 1 ) THEN
553	WRITE (numout, *) 'WARNING: factorisation of number of PEs failed'
554	WRITE (numout, *) ' : using grid of ',num_pes,' x 1'
555	jpnj = 1
556	jpni = num_pes
557	ELSE
558	! Search through factors for the pair that are closest in value
559	mindiff = 1000000
560	imin = 1
561	DO ji = 1, nfact-1, 2
562	idiff = ABS( ifact(ji) - ifact(ji+1) )
563	IF( idiff < mindiff ) THEN
564	mindiff = idiff
565	imin = ji
566	ENDIF
567	END DO
568	jpnj = ifact(imin)
569	jpni = ifact(imin + 1)
570	ENDIF
571	!
572	jpnij = jpni*jpnj
573	!
574	END SUBROUTINE nemo_partition
575
576
577	SUBROUTINE factorise( kfax, kmaxfax, knfax, kn, kerr )
578	!!----------------------------------------------------------------------
579	!! * ROUTINE factorise *
580	!!
581	!! ** Purpose : return the prime factors of n.
582	!! knfax factors are returned in array kfax which is of
583	!! maximum dimension kmaxfax.
584	!! ** Method :
585	!!----------------------------------------------------------------------
586	INTEGER , INTENT(in ) :: kn, kmaxfax
587	INTEGER , INTENT( out) :: kerr, knfax
588	INTEGER, DIMENSION(kmaxfax), INTENT( out) :: kfax
589	!
590	INTEGER :: ifac, jl, inu
591	INTEGER, PARAMETER :: ntest = 14
592	INTEGER :: ilfax(ntest)
593
594	! lfax contains the set of allowed factors.
595	data (ilfax(jl),jl=1,ntest) / 16384, 8192, 4096, 2048, 1024, 512, 256, &
596	& 128, 64, 32, 16, 8, 4, 2 /
597	!!----------------------------------------------------------------------
598
599	! Clear the error flag and initialise output vars
600	kerr = 0
601	kfax = 1
602	knfax = 0
603
604	! Find the factors of n.
605	IF( kn == 1 ) GOTO 20
606
607	! nu holds the unfactorised part of the number.
608	! knfax holds the number of factors found.
609	! l points to the allowed factor list.
610	! ifac holds the current factor.
611
612	inu = kn
613	knfax = 0
614
615	DO jl = ntest, 1, -1
616	!
617	ifac = ilfax(jl)
618	IF( ifac > inu ) CYCLE
619
620	! Test whether the factor will divide.
621
622	IF( MOD(inu,ifac) == 0 ) THEN
623	!
624	knfax = knfax + 1 ! Add the factor to the list
625	IF( knfax > kmaxfax ) THEN
626	kerr = 6
627	write (,) 'FACTOR: insufficient space in factor array ', knfax
628	return
629	ENDIF
630	kfax(knfax) = ifac
631	! Store the other factor that goes with this one
632	knfax = knfax + 1
633	kfax(knfax) = inu / ifac
634	!WRITE (,) 'ARPDBG, factors ',knfax-1,' & ',knfax,' are ', kfax(knfax-1),' and ',kfax(knfax)
635	ENDIF
636	!
637	END DO
638
639	20 CONTINUE ! Label 20 is the exit point from the factor search loop.
640	!
641	END SUBROUTINE factorise
642
643	#if defined key_mpp_mpi
644	SUBROUTINE nemo_northcomms
645	!!======================================================================
646	!! * ROUTINE nemo_northcomms *
647	!! nemo_northcomms : Setup for north fold exchanges with explicit peer to peer messaging
648	!!=====================================================================
649	!!----------------------------------------------------------------------
650	!!
651	!! ** Purpose : Initialization of the northern neighbours lists.
652	!!----------------------------------------------------------------------
653	!! 1.0 ! 2011-10 (A. C. Coward, NOCS & J. Donners, PRACE)
654	!!----------------------------------------------------------------------
655
656	INTEGER :: ji, jj, jk, ij, jtyp ! dummy loop indices
657	INTEGER :: ijpj ! number of rows involved in north-fold exchange
658	INTEGER :: northcomms_alloc ! allocate return status
659	REAL(wp), ALLOCATABLE, DIMENSION ( :,: ) :: znnbrs ! workspace
660	LOGICAL, ALLOCATABLE, DIMENSION ( : ) :: lrankset ! workspace
661
662	IF(lwp) WRITE(numout,*)
663	IF(lwp) WRITE(numout,*) 'nemo_northcomms : Initialization of the northern neighbours lists'
664	IF(lwp) WRITE(numout,*) '~~~~~~~~~~'
665
666	!!----------------------------------------------------------------------
667	ALLOCATE( znnbrs(jpi,jpj), stat = northcomms_alloc )
668	ALLOCATE( lrankset(jpnij), stat = northcomms_alloc )
669	IF( northcomms_alloc /= 0 ) THEN
670	WRITE(numout,cform_war)
671	WRITE(numout,*) 'northcomms_alloc : failed to allocate arrays'
672	CALL ctl_stop( 'STOP', 'nemo_northcomms : unable to allocate temporary arrays' )
673	ENDIF
674	nsndto = 0
675	isendto = -1
676	ijpj = 4
677	!
678	! This routine has been called because ln_nnogather has been set true ( nammpp )
679	! However, these first few exchanges have to use the mpi_allgather method to
680	! establish the neighbour lists to use in subsequent peer to peer exchanges.
681	! Consequently, set l_north_nogather to be false here and set it true only after
682	! the lists have been established.
683	!
684	l_north_nogather = .FALSE.
685	!
686	! Exchange and store ranks on northern rows
687
688	DO jtyp = 1,4
689
690	lrankset = .FALSE.
691	znnbrs = narea
692	SELECT CASE (jtyp)
693	CASE(1)
694	CALL lbc_lnk( znnbrs, 'T', 1. ) ! Type 1: T,W-points
695	CASE(2)
696	CALL lbc_lnk( znnbrs, 'U', 1. ) ! Type 2: U-point
697	CASE(3)
698	CALL lbc_lnk( znnbrs, 'V', 1. ) ! Type 3: V-point
699	CASE(4)
700	CALL lbc_lnk( znnbrs, 'F', 1. ) ! Type 4: F-point
701	END SELECT
702
703	IF ( njmppt(narea) .EQ. MAXVAL( njmppt ) ) THEN
704	DO jj = nlcj-ijpj+1, nlcj
705	ij = jj - nlcj + ijpj
706	DO ji = 1,jpi
707	IF ( INT(znnbrs(ji,jj)) .NE. 0 .AND. INT(znnbrs(ji,jj)) .NE. narea ) &
708	& lrankset(INT(znnbrs(ji,jj))) = .true.
709	END DO
710	END DO
711
712	DO jj = 1,jpnij
713	IF ( lrankset(jj) ) THEN
714	nsndto(jtyp) = nsndto(jtyp) + 1
715	IF ( nsndto(jtyp) .GT. jpmaxngh ) THEN
716	CALL ctl_stop( ' Too many neighbours in nemo_northcomms ', &
717	& ' jpmaxngh will need to be increased ')
718	ENDIF
719	isendto(nsndto(jtyp),jtyp) = jj-1 ! narea converted to MPI rank
720	ENDIF
721	END DO
722	ENDIF
723
724	END DO
725
726	!
727	! Type 5: I-point
728	!
729	! ICE point exchanges may involve some averaging. The neighbours list is
730	! built up using two exchanges to ensure that the whole stencil is covered.
731	! lrankset should not be reset between these 'J' and 'K' point exchanges
732
733	jtyp = 5
734	lrankset = .FALSE.
735	znnbrs = narea
736	CALL lbc_lnk( znnbrs, 'J', 1. ) ! first ice U-V point
737
738	IF ( njmppt(narea) .EQ. MAXVAL( njmppt ) ) THEN
739	DO jj = nlcj-ijpj+1, nlcj
740	ij = jj - nlcj + ijpj
741	DO ji = 1,jpi
742	IF ( INT(znnbrs(ji,jj)) .NE. 0 .AND. INT(znnbrs(ji,jj)) .NE. narea ) &
743	& lrankset(INT(znnbrs(ji,jj))) = .true.
744	END DO
745	END DO
746	ENDIF
747
748	znnbrs = narea
749	CALL lbc_lnk( znnbrs, 'K', 1. ) ! second ice U-V point
750
751	IF ( njmppt(narea) .EQ. MAXVAL( njmppt )) THEN
752	DO jj = nlcj-ijpj+1, nlcj
753	ij = jj - nlcj + ijpj
754	DO ji = 1,jpi
755	IF ( INT(znnbrs(ji,jj)) .NE. 0 .AND. INT(znnbrs(ji,jj)) .NE. narea ) &
756	& lrankset( INT(znnbrs(ji,jj))) = .true.
757	END DO
758	END DO
759
760	DO jj = 1,jpnij
761	IF ( lrankset(jj) ) THEN
762	nsndto(jtyp) = nsndto(jtyp) + 1
763	IF ( nsndto(jtyp) .GT. jpmaxngh ) THEN
764	CALL ctl_stop( ' Too many neighbours in nemo_northcomms ', &
765	& ' jpmaxngh will need to be increased ')
766	ENDIF
767	isendto(nsndto(jtyp),jtyp) = jj-1 ! narea converted to MPI rank
768	ENDIF
769	END DO
770	!
771	! For northern row areas, set l_north_nogather so that all subsequent exchanges
772	! can use peer to peer communications at the north fold
773	!
774	l_north_nogather = .TRUE.
775	!
776	ENDIF
777	DEALLOCATE( znnbrs )
778	DEALLOCATE( lrankset )
779
780	END SUBROUTINE nemo_northcomms
781	#else
782	SUBROUTINE nemo_northcomms ! Dummy routine
783	WRITE(,) 'nemo_northcomms: You should not have seen this print! error?'
784	END SUBROUTINE nemo_northcomms
785	#endif
786	!!======================================================================
787	END MODULE nemogcm

Note: See TracBrowser for help on using the repository browser.

Download in other formats: