1 | !!--------------------------------------------------------------------- |
---|
2 | !! *** par_ORCA_R025.h90 *** |
---|
3 | !! Ocean Domain : 0.25 degrees resolution global ocean |
---|
4 | !! (0RCA_R025 configuration) |
---|
5 | !!--------------------------------------------------------------------- |
---|
6 | !!---------------------------------------------------------------------- |
---|
7 | !! NEMO/OPA 3.3 , NEMO Consortium (2010) |
---|
8 | !! $Id$ |
---|
9 | !! Software governed by the CeCILL licence (NEMOGCM/NEMO_CeCILL.txt) |
---|
10 | !!---------------------------------------------------------------------- |
---|
11 | CHARACTER (len=16) & |
---|
12 | #if !defined key_agrif |
---|
13 | , PARAMETER & |
---|
14 | #endif |
---|
15 | :: & |
---|
16 | cp_cfg = "pomme" !: Name of the configuration |
---|
17 | INTEGER & |
---|
18 | #if !defined key_agrif |
---|
19 | , PARAMETER & |
---|
20 | #endif |
---|
21 | :: & |
---|
22 | jp_cfg = 025 , & !: Resolution of the configuration (degrees) |
---|
23 | |
---|
24 | ! ORCA025 global grid size |
---|
25 | jpiglo_ORCA025 = 1442, & |
---|
26 | jpjglo_ORCA025 = 1021, & ! not used currently |
---|
27 | ! POMME "global" domain localisation in the ORCA025 global grid |
---|
28 | jpi_iw = 1059 , & |
---|
29 | jpi_ie = 1088 , & |
---|
30 | jpj_js = 661 , & |
---|
31 | jpj_jn = 700 , & |
---|
32 | |
---|
33 | ! Data domain size !!! * Size of all input files * |
---|
34 | jpidta = ( jpi_ie - jpi_iw + 1 ), & !: =30 1st lateral dimension ( >= jpiglo ) |
---|
35 | jpjdta = ( jpj_jn - jpj_js + 1 ), & !: =40 2nd lateral dimension ( >= jpjglo ) |
---|
36 | jpkdta = 46 , & !: Number of levels ( >= jpk ) |
---|
37 | |
---|
38 | ! Global domain size !!! * Global domain * |
---|
39 | jpiglo = jpidta, & !: 1st dimension of global domain --> i |
---|
40 | jpjglo = jpjdta, & !: 2nd dimension of global domain --> j |
---|
41 | ! Starting position of the zoom |
---|
42 | jpizoom = 1 , & !: Left bottom (i,j) indices of the zoom |
---|
43 | jpjzoom = 1 , & !: in data domain indices |
---|
44 | ! Domain characteristics |
---|
45 | jperio = 0 !: Lateral cond. type (between 0 and 6) |
---|
46 | |
---|
47 | |
---|
48 | !! Values set to pp_not_used indicates that this parameter is not used in THIS config. |
---|
49 | !! Values set to pp_to_be_computed indicates that variables will be computed in domzgr |
---|
50 | |
---|
51 | REAL(wp), PARAMETER :: & |
---|
52 | pp_not_used = 999999._wp , & !: |
---|
53 | pp_to_be_computed = 0._wp !: |
---|
54 | |
---|
55 | |
---|
56 | !! Coefficients associated with the horizontal coordinate system |
---|
57 | |
---|
58 | INTEGER, PARAMETER :: & |
---|
59 | jphgr_msh = 0 !: type of horizontal mesh |
---|
60 | ! !: = 0 curvilinear coordinate on the sphere |
---|
61 | ! !: read in coordinate.nc file |
---|
62 | ! !: = 1 geographical mesh on the sphere |
---|
63 | ! !: with regular grid-spacing |
---|
64 | ! !: = 2 f-plane with regular grid-spacing |
---|
65 | ! !: = 3 beta-plane with regular grid-spacing |
---|
66 | ! !: = 4 Mercator grid with T/U point at the equator with |
---|
67 | ! !: isotropic resolution (e1_deg) |
---|
68 | |
---|
69 | ! ppglam0 , ppgphi0: coordinates of the lower leftmost T point of the grid. |
---|
70 | ! The mercator grid starts only approximately at gphi0 because |
---|
71 | ! of the constraint that the equator be a T point. |
---|
72 | |
---|
73 | REAL(wp), PARAMETER :: & |
---|
74 | ppglam0 = pp_not_used, & !: longitude of first raw and column T-point (jphgr_msh = 1) |
---|
75 | ppgphi0 = pp_not_used, & !: latitude of first raw and column T-point (jphgr_msh = 1) |
---|
76 | ! !: latitude for the Coriolis or Beta parameter (jphgr_msh = 2 or 3) |
---|
77 | ppe1_deg = pp_not_used, & !: zonal grid-spacing (degrees) |
---|
78 | ppe2_deg = pp_not_used, & !: meridional grid-spacing (degrees) |
---|
79 | ! |
---|
80 | ppe1_m = pp_not_used, & !: zonal grid-spacing (meters ) |
---|
81 | ppe2_m = pp_not_used !: meridional grid-spacing (meters ) |
---|
82 | |
---|
83 | |
---|
84 | !! Coefficients associated with the vertical coordinate system |
---|
85 | |
---|
86 | REAL(wp), PARAMETER :: & |
---|
87 | & ppsur = pp_to_be_computed , & !: Computed in domzgr, set ppdzmin and pphmax below |
---|
88 | & ppa0 = pp_to_be_computed , & !: " " |
---|
89 | & ppa1 = pp_to_be_computed , & !: " " |
---|
90 | & ppkth = 23.563_wp , & !: (non dimensional): gives the approximate |
---|
91 | ! !: layer number above which stretching will |
---|
92 | ! !: be maximum. Usually of order jpk/2. |
---|
93 | & ppacr = 9.00000000000_wp !: (non dimensional): stretching factor |
---|
94 | ! !: for the grid. The higher zacr, the smaller |
---|
95 | ! !: the stretching. |
---|
96 | |
---|
97 | ! If both ppa0 ppa1 and ppsur are specified to pp_to_be_computed, then |
---|
98 | ! they are computed from ppdzmin, pphmax , ppkth, ppacr in dom_zgr |
---|
99 | |
---|
100 | REAL(wp), PARAMETER :: & |
---|
101 | & ppdzmin = 6._wp , & !: (meters) vertical thickness of the top layer |
---|
102 | & pphmax = 5750._wp !: (meters) Maximum depth of the ocean gdepw(jpk) |
---|
103 | LOGICAL, PARAMETER :: & |
---|
104 | & ldbletanh = .FALSE. !: Use/do not use double tanf function for vertical coordinates |
---|
105 | REAL(wp), PARAMETER :: & |
---|
106 | & ppa2 = pp_not_used , & !: Double tanh function parameters |
---|
107 | & ppkth2 = pp_not_used , & !: |
---|
108 | & ppacr2 = pp_not_used !: |
---|
109 | !!--------------------------------------------------------------------- |
---|