1 | !!--------------------------------------------------------------------- |
---|
2 | !! *** par_ORCA_R025.h90 *** |
---|
3 | !! Ocean Domain : 0.25 degrees resolution global ocean |
---|
4 | !! (0RCA_R025 configuration) |
---|
5 | !!--------------------------------------------------------------------- |
---|
6 | !!---------------------------------------------------------------------- |
---|
7 | !! OPA 9.0 , LOCEAN-IPSL (2005) |
---|
8 | !! $Id$ |
---|
9 | !! This software is governed by the CeCILL licence see modipsl/doc/NEMO_CeCILL.txt |
---|
10 | !!---------------------------------------------------------------------- |
---|
11 | CHARACTER (len=16), PARAMETER :: & |
---|
12 | cp_cfg = "orca" !: name of the configuration |
---|
13 | INTEGER, PARAMETER :: & |
---|
14 | jp_cfg = 025 , & !: resolution of the configuration (degrees) |
---|
15 | ! Original data size |
---|
16 | jpidta = 1442, & !: first horizontal dimension > or = to jpi |
---|
17 | jpjdta = 1021, & !: second > or = to jpj |
---|
18 | jpkdta = 46 , & !: number of levels > or = to jpk |
---|
19 | ! total domain matrix size |
---|
20 | jpiglo = jpidta, & !: first dimension of global domain --> i |
---|
21 | jpjglo = jpjdta, & !: second dimension of global domain --> j |
---|
22 | jpk = jpkdta, & !: number of vertical levels |
---|
23 | ! starting position of the zoom |
---|
24 | jpizoom = 1 , & !: left bottom (i,j) indices of the zoom |
---|
25 | jpjzoom = 1 , & !: in data indices |
---|
26 | ! Domain characteristics |
---|
27 | jperio = 4 , & !: lateral cond. type (between 0 and 6) |
---|
28 | jpisl = 150 , & !: number of islands |
---|
29 | jpnisl = 3000 !: maximum number of points per island |
---|
30 | |
---|
31 | !! Values set to pp_not_used indicates that this parameter is not used in THIS config. |
---|
32 | !! Values set to pp_to_be_computed indicates that variables will be computed in domzgr |
---|
33 | REAL,PARAMETER :: pp_not_used = 999999_wp , & |
---|
34 | & pp_to_be_computed = 0._wp |
---|
35 | !! |
---|
36 | !! Coefficients associated with the horizontal coordinate system (jphgr_msh /= 0 ) |
---|
37 | !! |
---|
38 | INTEGER, PARAMETER :: & ! |
---|
39 | jphgr_msh = 0 !: type of horizontal mesh |
---|
40 | ! ! = 0 curvilinear coordinate on the sphere |
---|
41 | ! ! read in coordinate.nc file |
---|
42 | ! ! = 1 geographical mesh on the sphere |
---|
43 | ! ! with regular grid-spacing |
---|
44 | ! ! = 2 f-plane with regular grid-spacing |
---|
45 | ! ! = 3 beta-plane with regular grid-spacing |
---|
46 | ! ! = 4 Mercator grid with T/U point at the equator with |
---|
47 | ! ! isotropic resolution (e1_deg) |
---|
48 | |
---|
49 | ! ppglam0 , ppgphi0: coordinates of the lower leftmost T point of the grid. |
---|
50 | ! The mercator grid starts only approximately at gphi0 because |
---|
51 | ! of the constraint that the equator be a T point. |
---|
52 | REAL(wp), PARAMETER :: & ! |
---|
53 | ppglam0 = pp_not_used, & !: longitude of first raw and column T-point (jphgr_msh = 1) |
---|
54 | ppgphi0 = pp_not_used, & !: latitude of first raw and column T-point (jphgr_msh = 1) |
---|
55 | ! ! latitude for the Coriolis or Beta parameter (jphgr_msh = 2 or 3) |
---|
56 | ppe1_deg = pp_not_used, & !: zonal grid-spacing (degrees) |
---|
57 | ppe2_deg = pp_not_used, & !: meridional grid-spacing (degrees) |
---|
58 | ! |
---|
59 | ppe1_m = pp_not_used, & !: zonal grid-spacing (meters ) |
---|
60 | ppe2_m = pp_not_used !: meridional grid-spacing (meters ) |
---|
61 | |
---|
62 | !! Coefficients associated with the vertical coordinate system |
---|
63 | |
---|
64 | REAL(wp), PARAMETER :: & |
---|
65 | & ppsur = pp_to_be_computed , & !: Computed in domzgr, set ppdzmin and pphmax below |
---|
66 | & ppa0 = pp_to_be_computed , & !: " " |
---|
67 | & ppa1 = pp_to_be_computed , & !: " " |
---|
68 | ! |
---|
69 | & ppkth = 23.563_wp , & !: (non dimensional): gives the approximate |
---|
70 | ! !: layer number above which stretching will |
---|
71 | ! !: be maximum. Usually of order jpk/2. |
---|
72 | & ppacr = 9.00000000000_wp !: (non dimensional): stretching factor |
---|
73 | ! !: for the grid. The highest zacr, the smallest |
---|
74 | ! !: the stretching. |
---|
75 | |
---|
76 | !! |
---|
77 | !! If both ppa0 ppa1 and ppsur are specified to 0, then |
---|
78 | !! they are computed from ppdzmin, pphmax , ppkth, ppacr in dom_zgr |
---|
79 | !! |
---|
80 | REAL(wp), PARAMETER :: & |
---|
81 | & ppdzmin = 6._wp , & !: (meters) vertical thickness of the top layer |
---|
82 | & pphmax = 5750._wp !: (meters) Maximum depth of the ocean gdepw(jpk) |
---|
83 | !!--------------------------------------------------------------------- |
---|