Context Navigation

nemogcm.F90 @ 11039

Last change on this file since 11039 was 11039, checked in by rrenshaw, 5 years ago
code fix
File size: 41.1 KB

Rev	Line
[2496]	1	MODULE nemogcm
[2442]	2	!!======================================================================
[2496]	3	!! * MODULE nemogcm *
	4	!! Ocean system : NEMO GCM (ocean dynamics, on-line tracers, biochemistry and sea-ice)
[2442]	5	!!======================================================================
[1593]	6	!! History : OPA ! 1990-10 (C. Levy, G. Madec) Original code
	7	!! 7.0 ! 1991-11 (M. Imbard, C. Levy, G. Madec)
[3764]	8	!! 7.1 ! 1993-03 (M. Imbard, C. Levy, G. Madec, O. Marti, M. Guyon, A. Lazar,
	9	!! P. Delecluse, C. Perigaud, G. Caniaux, B. Colot, C. Maes) release 7.1
[1593]	10	!! - ! 1992-06 (L.Terray) coupling implementation
[3764]	11	!! - ! 1993-11 (M.A. Filiberti) IGLOO sea-ice
	12	!! 8.0 ! 1996-03 (M. Imbard, C. Levy, G. Madec, O. Marti, M. Guyon, A. Lazar,
[2104]	13	!! P. Delecluse, L.Terray, M.A. Filiberti, J. Vialar, A.M. Treguier, M. Levy) release 8.0
[1593]	14	!! 8.1 ! 1997-06 (M. Imbard, G. Madec)
[3764]	15	!! 8.2 ! 1999-11 (M. Imbard, H. Goosse) LIM sea-ice model
	16	!! ! 1999-12 (V. Thierry, A-M. Treguier, M. Imbard, M-A. Foujols) OPEN-MP
[1593]	17	!! ! 2000-07 (J-M Molines, M. Imbard) Open Boundary Conditions (CLIPPER)
	18	!! NEMO 1.0 ! 2002-08 (G. Madec) F90: Free form and modules
	19	!! - ! 2004-06 (R. Redler, NEC CCRLE, Germany) add OASIS[3/4] coupled interfaces
	20	!! - ! 2004-08 (C. Talandier) New trends organization
	21	!! - ! 2005-06 (C. Ethe) Add the 1D configuration possibility
	22	!! - ! 2005-11 (V. Garnier) Surface pressure gradient organization
	23	!! - ! 2006-03 (L. Debreu, C. Mazauric) Agrif implementation
	24	!! - ! 2006-04 (G. Madec, R. Benshila) Step reorganization
	25	!! - ! 2007-07 (J. Chanut, A. Sellar) Unstructured open boundaries (BDY)
	26	!! 3.2 ! 2009-08 (S. Masson) open/write in the listing file in mpp
[3764]	27	!! 3.3 ! 2010-05 (K. Mogensen, A. Weaver, M. Martin, D. Lea) Assimilation interface
[2236]	28	!! - ! 2010-10 (C. Ethe, G. Madec) reorganisation of initialisation phase
[3294]	29	!! 3.3.1! 2011-01 (A. R. Porter, STFC Daresbury) dynamical allocation
	30	!! 3.4 ! 2011-11 (C. Harris) decomposition changes for running with CICE
[4152]	31	!! ! 2012-05 (C. Calone, J. Simeon, G. Madec, C. Ethe) Add grid coarsening
[1593]	32	!!----------------------------------------------------------------------
[3]	33
	34	!!----------------------------------------------------------------------
[2496]	35	!! nemo_gcm : solve ocean dynamics, tracer, biogeochemistry and/or sea-ice
	36	!! nemo_init : initialization of the NEMO system
[3764]	37	!! nemo_ctl : initialisation of the contol print
[2496]	38	!! nemo_closefile : close remaining open files
[2715]	39	!! nemo_alloc : dynamical allocation
	40	!! nemo_partition : calculate MPP domain decomposition
	41	!! factorise : calculate the factors of the no. of MPI processes
[3]	42	!!----------------------------------------------------------------------
[2382]	43	USE step_oce ! module used in the ocean time stepping module
[2392]	44	USE cla ! cross land advection (tra_cla routine)
[3]	45	USE domcfg ! domain configuration (dom_cfg routine)
	46	USE mppini ! shared/distributed memory setting (mpp_init routine)
	47	USE domain ! domain initialization (dom_init routine)
[3625]	48	#if defined key_nemocice_decomp
	49	USE ice_domain_size, only: nx_global, ny_global
	50	#endif
[3651]	51	USE tideini ! tidal components initialization (tide_ini routine)
[4990]	52	USE bdyini ! open boundary cond. setting (bdy_init routine)
	53	USE bdydta ! open boundary cond. setting (bdy_dta_init routine)
	54	USE bdytides ! open boundary cond. setting (bdytide_init routine)
[3]	55	USE istate ! initial state setting (istate_init routine)
	56	USE ldfdyn ! lateral viscosity setting (ldfdyn_init routine)
	57	USE ldftra ! lateral diffusivity setting (ldftra_init routine)
[2392]	58	USE zdfini ! vertical physics setting (zdf_init routine)
[3]	59	USE phycst ! physical constant (par_cst routine)
[4990]	60	USE trdini ! dyn/tra trends initialization (trd_init routine)
[3768]	61	USE asminc ! assimilation increments
	62	USE asmbkg ! writing out state trajectory
[10728]	63	USE asmbgc ! biogeochemical assimilation increments
[2236]	64	USE diaptr ! poleward transports (dia_ptr_init routine)
[3294]	65	USE diadct ! sections transports (dia_dct_init routine)
[2236]	66	USE diaobs ! Observation diagnostics (dia_obs_init routine)
[11039]	67	USE diapea ! potential energy anomaly (dia_regmean_init routine)
	68	USE diaregmean ! regional means (dia_obs_init routine)
[3764]	69	USE lib_fortran ! Fortran utilities (allows no signed zero when 'key_nosignedzero' defined)
[2496]	70	USE step ! NEMO time-stepping (stp routine)
[3609]	71	USE icbini ! handle bergs, initialisation
	72	USE icbstp ! handle bergs, calving, themodynamics and transport
[1359]	73	USE cpl_oasis3 ! OASIS3 coupling
[900]	74	USE c1d ! 1D configuration
	75	USE step_c1d ! Time stepping loop for the 1D configuration
[4245]	76	USE dyndmp ! Momentum damping
[1594]	77	#if defined key_top
[1593]	78	USE trcini ! passive tracer initialisation
[1594]	79	#endif
[1593]	80	USE lib_mpp ! distributed memory computing
[1412]	81	#if defined key_iomput
[3701]	82	USE xios
[1359]	83	#endif
[3651]	84	USE sbctide, ONLY: lk_tide
[4152]	85	USE crsini ! initialise grid coarsening utility
[4671]	86	USE lbcnfd, ONLY: isendto, nsndto, nfsloop, nfeloop ! Setup of north fold exchanges
[5407]	87	USE sbc_oce, ONLY: lk_oasis
[5329]	88	USE stopar
	89	USE stopts
[8059]	90	USE diatmb ! Top,middle,bottom output
	91	USE dia25h ! 25h mean output
[8561]	92	USE diaopfoam ! FOAM operational output
	93	USE diurnal_bulk ! diurnal bulk SST
[268]	94
[2715]	95	IMPLICIT NONE
[3]	96	PRIVATE
	97
[2496]	98	PUBLIC nemo_gcm ! called by model.F90
	99	PUBLIC nemo_init ! needed by AGRIF
[3764]	100	PUBLIC nemo_alloc ! needed by TAM
[467]	101
[2498]	102	CHARACTER(lc) :: cform_aaa="( /, 'AAAAAAAA', / ) " ! flag for output listing
[1593]	103
[3]	104	!!----------------------------------------------------------------------
[2715]	105	!! NEMO/OPA 4.0 , NEMO Consortium (2011)
[2392]	106	!! $Id$
[2329]	107	!! Software governed by the CeCILL licence (NEMOGCM/NEMO_CeCILL.txt)
[3]	108	!!----------------------------------------------------------------------
	109	CONTAINS
	110
[2496]	111	SUBROUTINE nemo_gcm
[3]	112	!!----------------------------------------------------------------------
[2496]	113	!! * ROUTINE nemo_gcm *
[3]	114	!!
[3764]	115	!! ** Purpose : NEMO solves the primitive equations on an orthogonal
[1593]	116	!! curvilinear mesh on the sphere.
[3]	117	!!
	118	!! ** Method : - model general initialization
	119	!! - launch the time-stepping (stp routine)
[1593]	120	!! - finalize the run by closing files and communications
[3]	121	!!
[2715]	122	!! References : Madec, Delecluse, Imbard, and Levy, 1997: internal report, IPSL.
[1593]	123	!! Madec, 2008, internal report, IPSL.
[3]	124	!!----------------------------------------------------------------------
	125	INTEGER :: istp ! time step index
[389]	126	!!----------------------------------------------------------------------
[2382]	127	!
[392]	128	#if defined key_agrif
[1593]	129	CALL Agrif_Init_Grids() ! AGRIF: set the meshes
[389]	130	#endif
	131
[1593]	132	! !-----------------------!
[2496]	133	CALL nemo_init !== Initialisations ==!
[1593]	134	! !-----------------------!
[2715]	135	#if defined key_agrif
[3680]	136	CALL Agrif_Declare_Var_dom ! AGRIF: set the meshes for DOM
	137	CALL Agrif_Declare_Var ! " " " " " DYN/TRA
[2715]	138	# if defined key_top
[3680]	139	CALL Agrif_Declare_Var_top ! " " " " " TOP
[2715]	140	# endif
[3680]	141	# if defined key_lim2
	142	CALL Agrif_Declare_Var_lim2 ! " " " " " LIM
	143	# endif
[2715]	144	#endif
[682]	145	! check that all process are still there... If some process have an error,
	146	! they will never enter in step and other processes will wait until the end of the cpu time!
[900]	147	IF( lk_mpp ) CALL mpp_max( nstop )
[682]	148
[1593]	149	IF(lwp) WRITE(numout,cform_aaa) ! Flag AAAAAAA
	150
	151	! !-----------------------!
	152	! !== time stepping ==!
	153	! !-----------------------!
[900]	154	istp = nit000
[2236]	155	#if defined key_c1d
[389]	156	DO WHILE ( istp <= nitend .AND. nstop == 0 )
[900]	157	CALL stp_c1d( istp )
[389]	158	istp = istp + 1
	159	END DO
[2236]	160	#else
	161	IF( lk_asminc ) THEN
	162	IF( ln_bkgwri ) CALL asm_bkg_wri( nit000 - 1 ) ! Output background fields
	163	IF( ln_asmdin ) THEN ! Direct initialization
	164	IF( ln_trainc ) CALL tra_asm_inc( nit000 - 1 ) ! Tracers
[3764]	165	IF( ln_dyninc ) CALL dyn_asm_inc( nit000 - 1 ) ! Dynamics
[2236]	166	IF( ln_sshinc ) CALL ssh_asm_inc( nit000 - 1 ) ! SSH
[10728]	167	IF( lk_bgcinc ) CALL bgc_asm_inc( nit000 - 1 ) ! BGC
[2236]	168	ENDIF
	169	ENDIF
[3764]	170
[6204]	171	#if defined key_agrif
	172	CALL Agrif_Regrid()
	173	#endif
	174
[389]	175	DO WHILE ( istp <= nitend .AND. nstop == 0 )
[392]	176	#if defined key_agrif
[6204]	177	CALL stp ! AGRIF: time stepping
[389]	178	#else
[1593]	179	CALL stp( istp ) ! standard time stepping
[389]	180	#endif
	181	istp = istp + 1
[900]	182	IF( lk_mpp ) CALL mpp_max( nstop )
[389]	183	END DO
[2236]	184	#endif
	185
[3609]	186	IF( lk_diaobs ) CALL dia_obs_wri
	187	!
[10728]	188	IF( ( lk_asminc ).AND.( ln_balwri ) ) CALL asm_bgc_bal_wri( nitend ) ! Output balancing increments
	189	!
[3609]	190	IF( ln_icebergs ) CALL icb_end( nitend )
[3764]	191
[1593]	192	! !------------------------!
	193	! !== finalize the run ==!
	194	! !------------------------!
	195	IF(lwp) WRITE(numout,cform_aaa) ! Flag AAAAAAA
	196	!
	197	IF( nstop /= 0 .AND. lwp ) THEN ! error print
[682]	198	WRITE(numout,cform_err)
[3764]	199	WRITE(numout,*) nstop, ' error have been found'
[389]	200	ENDIF
[1593]	201	!
[3294]	202	#if defined key_agrif
[6204]	203	IF( .NOT. Agrif_Root() ) THEN
[5531]	204	CALL Agrif_ParentGrid_To_ChildGrid()
	205	IF( lk_diaobs ) CALL dia_obs_wri
	206	IF( nn_timing == 1 ) CALL timing_finalize
	207	CALL Agrif_ChildGrid_To_ParentGrid()
	208	ENDIF
[3294]	209	#endif
	210	IF( nn_timing == 1 ) CALL timing_finalize
	211	!
[2496]	212	CALL nemo_closefile
[4990]	213	!
[3769]	214	#if defined key_iomput
	215	CALL xios_finalize ! end mpp communications with xios
[5407]	216	IF( lk_oasis ) CALL cpl_finalize ! end coupling and mpp communications with OASIS
[532]	217	#else
[5407]	218	IF( lk_oasis ) THEN
[4990]	219	CALL cpl_finalize ! end coupling and mpp communications with OASIS
	220	ELSE
	221	IF( lk_mpp ) CALL mppstop ! end mpp communications
	222	ENDIF
[532]	223	#endif
[900]	224	!
[2496]	225	END SUBROUTINE nemo_gcm
[389]	226
	227
[2496]	228	SUBROUTINE nemo_init
[389]	229	!!----------------------------------------------------------------------
[2496]	230	!! * ROUTINE nemo_init *
[389]	231	!!
[2496]	232	!! ** Purpose : initialization of the NEMO GCM
[389]	233	!!----------------------------------------------------------------------
[2715]	234	INTEGER :: ji ! dummy loop indices
	235	INTEGER :: ilocal_comm ! local integer
[4147]	236	INTEGER :: ios
[2715]	237	CHARACTER(len=80), DIMENSION(16) :: cltxt
[4990]	238	!
	239	NAMELIST/namctl/ ln_ctl , nn_print, nn_ictls, nn_ictle, &
[3294]	240	& nn_isplt, nn_jsplt, nn_jctls, nn_jctle, &
	241	& nn_bench, nn_timing
[4147]	242	NAMELIST/namcfg/ cp_cfg, cp_cfz, jp_cfg, jpidta, jpjdta, jpkdta, jpiglo, jpjglo, &
[5118]	243	& jpizoom, jpjzoom, jperio, ln_use_jattr
[3]	244	!!----------------------------------------------------------------------
[1593]	245	!
[2496]	246	cltxt = ''
[5407]	247	cxios_context = 'nemo'
[2496]	248	!
[4147]	249	! ! Open reference namelist and configuration namelist files
	250	CALL ctl_opn( numnam_ref, 'namelist_ref', 'OLD', 'FORMATTED', 'SEQUENTIAL', -1, 6, .FALSE. )
	251	CALL ctl_opn( numnam_cfg, 'namelist_cfg', 'OLD', 'FORMATTED', 'SEQUENTIAL', -1, 6, .FALSE. )
[1593]	252	!
[4147]	253	REWIND( numnam_ref ) ! Namelist namctl in reference namelist : Control prints & Benchmark
	254	READ ( numnam_ref, namctl, IOSTAT = ios, ERR = 901 )
[4289]	255	901 IF( ios /= 0 ) CALL ctl_nam ( ios , 'namctl in reference namelist', .TRUE. )
[4147]	256
	257	REWIND( numnam_cfg ) ! Namelist namctl in confguration namelist : Control prints & Benchmark
	258	READ ( numnam_cfg, namctl, IOSTAT = ios, ERR = 902 )
[4289]	259	902 IF( ios /= 0 ) CALL ctl_nam ( ios , 'namctl in configuration namelist', .TRUE. )
[4147]	260
[1593]	261	!
[4147]	262	REWIND( numnam_ref ) ! Namelist namcfg in reference namelist : Control prints & Benchmark
	263	READ ( numnam_ref, namcfg, IOSTAT = ios, ERR = 903 )
[4289]	264	903 IF( ios /= 0 ) CALL ctl_nam ( ios , 'namcfg in reference namelist', .TRUE. )
[4147]	265
	266	REWIND( numnam_cfg ) ! Namelist namcfg in confguration namelist : Control prints & Benchmark
	267	READ ( numnam_cfg, namcfg, IOSTAT = ios, ERR = 904 )
[4289]	268	904 IF( ios /= 0 ) CALL ctl_nam ( ios , 'namcfg in configuration namelist', .TRUE. )
[4309]	269
[4147]	270	! Force values for AGRIF zoom (cf. agrif_user.F90)
	271	#if defined key_agrif
	272	IF( .NOT. Agrif_Root() ) THEN
	273	jpiglo = nbcellsx + 2 + 2*nbghostcells
	274	jpjglo = nbcellsy + 2 + 2*nbghostcells
	275	jpi = ( jpiglo-2jpreci + (jpni-1+0) ) / jpni + 2jpreci
	276	jpj = ( jpjglo-2jprecj + (jpnj-1+0) ) / jpnj + 2jprecj
	277	jpidta = jpiglo
	278	jpjdta = jpjglo
	279	jpizoom = 1
	280	jpjzoom = 1
	281	nperio = 0
	282	jperio = 0
[5118]	283	ln_use_jattr = .false.
[4147]	284	ENDIF
	285	#endif
	286	!
[1593]	287	! !--------------------------------------------!
	288	! ! set communicator & select the local node !
[4624]	289	! ! NB: mynode also opens output.namelist.dyn !
	290	! ! on unit number numond on first proc !
[1593]	291	! !--------------------------------------------!
[1412]	292	#if defined key_iomput
[2200]	293	IF( Agrif_Root() ) THEN
[5407]	294	IF( lk_oasis ) THEN
	295	CALL cpl_init( "oceanx", ilocal_comm ) ! nemo local communicator given by oasis
	296	CALL xios_initialize( "not used",local_comm=ilocal_comm ) ! send nemo communicator to xios
[4990]	297	ELSE
[5407]	298	CALL xios_initialize( "for_xios_mpi_id",return_comm=ilocal_comm ) ! nemo local communicator given by xios
[4990]	299	ENDIF
[2200]	300	ENDIF
[5407]	301	! Nodes selection (control print return in cltxt)
	302	narea = mynode( cltxt, 'output.namelist.dyn', numnam_ref, numnam_cfg, numond , nstop, ilocal_comm )
[532]	303	#else
[5407]	304	IF( lk_oasis ) THEN
[4990]	305	IF( Agrif_Root() ) THEN
[5407]	306	CALL cpl_init( "oceanx", ilocal_comm ) ! nemo local communicator given by oasis
[4990]	307	ENDIF
[5407]	308	! Nodes selection (control print return in cltxt)
	309	narea = mynode( cltxt, 'output.namelist.dyn', numnam_ref, numnam_cfg, numond , nstop, ilocal_comm )
[4990]	310	ELSE
	311	ilocal_comm = 0
[5407]	312	! Nodes selection (control print return in cltxt)
	313	narea = mynode( cltxt, 'output.namelist.dyn', numnam_ref, numnam_cfg, numond , nstop )
[2236]	314	ENDIF
[532]	315	#endif
[2715]	316	narea = narea + 1 ! mynode return the rank of proc (0 --> jpnij -1 )
[3]	317
[4624]	318	lwm = (narea == 1) ! control of output namelists
[2715]	319	lwp = (narea == 1) .OR. ln_ctl ! control of all listing output print
[1579]	320
[4624]	321	IF(lwm) THEN
	322	! write merged namelists from earlier to output namelist now that the
	323	! file has been opened in call to mynode. nammpp has already been
	324	! written in mynode (if lk_mpp_mpi)
	325	WRITE( numond, namctl )
	326	WRITE( numond, namcfg )
	327	ENDIF
	328
[3764]	329	! If dimensions of processor grid weren't specified in the namelist file
[2715]	330	! then we calculate them here now that we have our communicator size
	331	IF( (jpni < 1) .OR. (jpnj < 1) )THEN
	332	#if defined key_mpp_mpi
	333	IF( Agrif_Root() ) CALL nemo_partition(mppsize)
	334	#else
	335	jpni = 1
	336	jpnj = 1
	337	jpnij = jpni*jpnj
	338	#endif
	339	END IF
	340
	341	! Calculate domain dimensions given calculated jpni and jpnj
	342	! This used to be done in par_oce.F90 when they were parameters rather
	343	! than variables
	344	IF( Agrif_Root() ) THEN
[3294]	345	#if defined key_nemocice_decomp
[3625]	346	jpi = ( nx_global+2-2jpreci + (jpni-1) ) / jpni + 2jpreci ! first dim.
	347	jpj = ( ny_global+2-2jprecj + (jpnj-1) ) / jpnj + 2jprecj ! second dim.
[3294]	348	#else
[3625]	349	jpi = ( jpiglo-2jpreci + (jpni-1) ) / jpni + 2jpreci ! first dim.
[2715]	350	jpj = ( jpjglo-2jprecj + (jpnj-1) ) / jpnj + 2jprecj ! second dim.
[3294]	351	#endif
[6204]	352	ENDIF
[2715]	353	jpk = jpkdta ! third dim
[6204]	354	#if defined key_agrif
	355	! simple trick to use same vertical grid as parent
	356	! but different number of levels:
	357	! Save maximum number of levels in jpkdta, then define all vertical grids
	358	! with this number.
	359	! Suppress once vertical online interpolation is ok
	360	IF(.NOT.Agrif_Root()) jpkdta = Agrif_Parent(jpkdta)
	361	#endif
[2715]	362	jpim1 = jpi-1 ! inner domain indices
	363	jpjm1 = jpj-1 ! " "
	364	jpkm1 = jpk-1 ! " "
	365	jpij = jpi*jpj ! jpi x j
	366
[1593]	367	IF(lwp) THEN ! open listing units
	368	!
[1581]	369	CALL ctl_opn( numout, 'ocean.output', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, 6, .FALSE., narea )
[1593]	370	!
[1579]	371	WRITE(numout,*)
[3294]	372	WRITE(numout,*) ' CNRS - NERC - Met OFFICE - MERCATOR-ocean - INGV - CMCC'
[1593]	373	WRITE(numout,*) ' NEMO team'
[1579]	374	WRITE(numout,*) ' Ocean General Circulation Model'
[5120]	375	WRITE(numout,*) ' version 3.6 (2015) '
[1579]	376	WRITE(numout,*)
	377	WRITE(numout,*)
[3764]	378	DO ji = 1, SIZE(cltxt)
[1593]	379	IF( TRIM(cltxt(ji)) /= '' ) WRITE(numout,*) cltxt(ji) ! control print of mynode
[1579]	380	END DO
[1593]	381	WRITE(numout,cform_aaa) ! Flag AAAAAAA
	382	!
[473]	383	ENDIF
[2715]	384
[3764]	385	! Now we know the dimensions of the grid and numout has been set we can
[2715]	386	! allocate arrays
	387	CALL nemo_alloc()
	388
[2496]	389	! !-------------------------------!
	390	! ! NEMO general initialization !
	391	! !-------------------------------!
[473]	392
[2496]	393	CALL nemo_ctl ! Control prints & Benchmark
[531]	394
[2082]	395	! ! Domain decomposition
[1593]	396	IF( jpni*jpnj == jpnij ) THEN ; CALL mpp_init ! standard cutting out
	397	ELSE ; CALL mpp_init2 ! eliminate land processors
[3]	398	ENDIF
[2382]	399	!
[3294]	400	IF( nn_timing == 1 ) CALL timing_init
	401	!
[2082]	402	! ! General initialization
[2027]	403	CALL phy_cst ! Physical constants
	404	CALL eos_init ! Equation of state
[4245]	405	IF( lk_c1d ) CALL c1d_init ! 1D column configuration
[2027]	406	CALL dom_cfg ! Domain configuration
	407	CALL dom_init ! Domain
[413]	408
[3294]	409	IF( ln_nnogather ) CALL nemo_northcomms ! Initialise the northfold neighbour lists (must be done after the masks are defined)
	410
[2027]	411	IF( ln_ctl ) CALL prt_ctl_init ! Print control
	412
[3651]	413	CALL istate_init ! ocean initial state (Dynamics and tracers)
	414
[8561]	415	CALL diurnal_sst_bulk_init ! diurnal sst
	416	IF ( ln_diurnal ) CALL diurnal_sst_coolskin_init ! cool skin
	417
[4292]	418	IF( lk_tide ) CALL tide_init( nit000 ) ! Initialisation of the tidal harmonics
[3651]	419
[5123]	420	CALL sbc_init ! Forcings : surface module (clem: moved here for bdy purpose)
	421
[4990]	422	IF( lk_bdy ) CALL bdy_init ! Open boundaries initialisation
	423	IF( lk_bdy ) CALL bdy_dta_init ! Open boundaries initialisation of external data arrays
[4292]	424	IF( lk_bdy .AND. lk_tide ) &
[4990]	425	& CALL bdytide_init ! Open boundaries initialisation of tidal harmonic forcing
[2027]	426
[3294]	427	CALL dyn_nept_init ! simplified form of Neptune effect
[4152]	428	!
	429	IF( ln_crs ) CALL crs_init ! Domain initialization of coarsened grid
	430	!
	431	! Ocean physics
[2082]	432	! ! Vertical physics
	433	CALL zdf_init ! namelist read
	434	CALL zdf_bfr_init ! bottom friction
	435	IF( lk_zdfric ) CALL zdf_ric_init ! Richardson number dependent Kz
[2329]	436	IF( lk_zdftke ) CALL zdf_tke_init ! TKE closure scheme
	437	IF( lk_zdfgls ) CALL zdf_gls_init ! GLS closure scheme
	438	IF( lk_zdfkpp ) CALL zdf_kpp_init ! KPP closure scheme
[2082]	439	IF( lk_zdftmx ) CALL zdf_tmx_init ! tidal vertical mixing
[3764]	440	IF( lk_zdfddm .AND. .NOT. lk_zdfkpp ) &
[2082]	441	& CALL zdf_ddm_init ! double diffusive mixing
	442	! ! Lateral physics
	443	CALL ldf_tra_init ! Lateral ocean tracer physics
	444	CALL ldf_dyn_init ! Lateral ocean momentum physics
[2392]	445	IF( lk_ldfslp ) CALL ldf_slp_init ! slope of lateral mixing
[2082]	446
[2027]	447	! ! Active tracers
	448	CALL tra_qsr_init ! penetrative solar radiation qsr
[2325]	449	CALL tra_bbc_init ! bottom heat flux
[2027]	450	IF( lk_trabbl ) CALL tra_bbl_init ! advective (and/or diffusive) bottom boundary layer scheme
[4245]	451	CALL tra_dmp_init ! internal damping trends- tracers
[2027]	452	CALL tra_adv_init ! horizontal & vertical advection
	453	CALL tra_ldf_init ! lateral mixing
	454	CALL tra_zdf_init ! vertical mixing and after tracer fields
	455
	456	! ! Dynamics
[4245]	457	IF( lk_c1d ) CALL dyn_dmp_init ! internal damping trends- momentum
[2027]	458	CALL dyn_adv_init ! advection (vector or flux form)
[2104]	459	CALL dyn_vor_init ! vorticity term including Coriolis
[2027]	460	CALL dyn_ldf_init ! lateral mixing
[2104]	461	CALL dyn_hpg_init ! horizontal gradient of Hydrostatic pressure
[2027]	462	CALL dyn_zdf_init ! vertical diffusion
	463	CALL dyn_spg_init ! surface pressure gradient
[3764]	464
[2392]	465	! ! Misc. options
[4147]	466	IF( nn_cla == 1 .AND. cp_cfg == 'orca' .AND. jp_cfg == 2 ) CALL cla_init ! Cross Land Advection
[3609]	467	CALL icb_init( rdt, nit000) ! initialise icebergs instance
[5329]	468	CALL sto_par_init ! Stochastic parametrization
	469	IF( ln_sto_eos ) CALL sto_pts_init ! RRandom T/S fluctuations
[4147]	470
[1594]	471	#if defined key_top
[2027]	472	! ! Passive tracers
[2082]	473	CALL trc_init
[1594]	474	#endif
[4990]	475	! ! Diagnostics
[3294]	476	IF( lk_floats ) CALL flo_init ! drifting Floats
[2392]	477	IF( lk_diaar5 ) CALL dia_ar5_init ! ar5 diag
[2027]	478	CALL dia_ptr_init ! Poleward TRansports initialization
[3294]	479	IF( lk_diadct ) CALL dia_dct_init ! Sections tranports
[2148]	480	CALL dia_hsb_init ! heat content, salt content and volume budgets
[4990]	481	CALL trd_init ! Mixed-layer/Vorticity/Integral constraints trends
[2392]	482	IF( lk_diaobs ) THEN ! Observation & model comparison
[2382]	483	CALL dia_obs_init ! Initialize observational data
	484	CALL dia_obs( nit000 - 1 ) ! Observation operator for restart
[3764]	485	ENDIF
[4990]	486
[2382]	487	! ! Assimilation increments
[9181]	488	IF( lk_asminc ) THEN
	489	#if defined key_shelf
	490	CALL zdf_mxl_tref() ! Initialization of hmld_tref
	491	#endif
	492	CALL asm_inc_init ! Initialize assimilation increments
	493	ENDIF
	494
[2382]	495	IF(lwp) WRITE(numout,*) 'Euler time step switch is ', neuler
[8059]	496	CALL dia_tmb_init ! TMB outputs
[11038]	497	CALL dia_regmean_init ! TMB outputs
	498	CALL dia_pea_init ! TMB outputs
[8059]	499	CALL dia_25h_init ! 25h mean outputs
[8561]	500	CALL dia_diaopfoam_init ! FOAM operational output
[1593]	501	!
[2496]	502	END SUBROUTINE nemo_init
[467]	503
	504
[2496]	505	SUBROUTINE nemo_ctl
[467]	506	!!----------------------------------------------------------------------
[2496]	507	!! * ROUTINE nemo_ctl *
[467]	508	!!
[3764]	509	!! ** Purpose : control print setting
[467]	510	!!
[2442]	511	!! ** Method : - print namctl information and check some consistencies
[467]	512	!!----------------------------------------------------------------------
[2442]	513	!
[2496]	514	IF(lwp) THEN ! control print
[531]	515	WRITE(numout,*)
[2496]	516	WRITE(numout,*) 'nemo_ctl: Control prints & Benchmark'
[531]	517	WRITE(numout,*) '~~~~~~~ '
[1593]	518	WRITE(numout,*) ' Namelist namctl'
[1601]	519	WRITE(numout,*) ' run control (for debugging) ln_ctl = ', ln_ctl
	520	WRITE(numout,*) ' level of print nn_print = ', nn_print
	521	WRITE(numout,*) ' Start i indice for SUM control nn_ictls = ', nn_ictls
	522	WRITE(numout,*) ' End i indice for SUM control nn_ictle = ', nn_ictle
	523	WRITE(numout,*) ' Start j indice for SUM control nn_jctls = ', nn_jctls
	524	WRITE(numout,*) ' End j indice for SUM control nn_jctle = ', nn_jctle
	525	WRITE(numout,*) ' number of proc. following i nn_isplt = ', nn_isplt
	526	WRITE(numout,*) ' number of proc. following j nn_jsplt = ', nn_jsplt
	527	WRITE(numout,*) ' benchmark parameter (0/1) nn_bench = ', nn_bench
[3610]	528	WRITE(numout,*) ' timing activated (0/1) nn_timing = ', nn_timing
[531]	529	ENDIF
[2442]	530	!
[1601]	531	nprint = nn_print ! convert DOCTOR namelist names into OLD names
	532	nictls = nn_ictls
	533	nictle = nn_ictle
	534	njctls = nn_jctls
	535	njctle = nn_jctle
	536	isplt = nn_isplt
	537	jsplt = nn_jsplt
	538	nbench = nn_bench
[4147]	539
	540	IF(lwp) THEN ! control print
	541	WRITE(numout,*)
	542	WRITE(numout,*) 'namcfg : configuration initialization through namelist read'
	543	WRITE(numout,*) '~~~~~~~ '
	544	WRITE(numout,*) ' Namelist namcfg'
	545	WRITE(numout,*) ' configuration name cp_cfg = ', TRIM(cp_cfg)
	546	WRITE(numout,*) ' configuration zoom name cp_cfz = ', TRIM(cp_cfz)
	547	WRITE(numout,*) ' configuration resolution jp_cfg = ', jp_cfg
	548	WRITE(numout,*) ' 1st lateral dimension ( >= jpi ) jpidta = ', jpidta
	549	WRITE(numout,*) ' 2nd " " ( >= jpj ) jpjdta = ', jpjdta
	550	WRITE(numout,*) ' 3nd " " jpkdta = ', jpkdta
	551	WRITE(numout,*) ' 1st dimension of global domain in i jpiglo = ', jpiglo
	552	WRITE(numout,*) ' 2nd - - in j jpjglo = ', jpjglo
	553	WRITE(numout,*) ' left bottom i index of the zoom (in data domain) jpizoom = ', jpizoom
	554	WRITE(numout,*) ' left bottom j index of the zoom (in data domain) jpizoom = ', jpjzoom
	555	WRITE(numout,*) ' lateral cond. type (between 0 and 6) jperio = ', jperio
[5118]	556	WRITE(numout,*) ' use file attribute if exists as i/p j-start ln_use_jattr = ', ln_use_jattr
[4147]	557	ENDIF
[2442]	558	! ! Parameter control
[1593]	559	!
	560	IF( ln_ctl ) THEN ! sub-domain area indices for the control prints
[3294]	561	IF( lk_mpp .AND. jpnij > 1 ) THEN
[2496]	562	isplt = jpni ; jsplt = jpnj ; ijsplt = jpni*jpnj ! the domain is forced to the real split domain
[531]	563	ELSE
	564	IF( isplt == 1 .AND. jsplt == 1 ) THEN
[1593]	565	CALL ctl_warn( ' - isplt & jsplt are equal to 1', &
	566	& ' - the print control will be done over the whole domain' )
[531]	567	ENDIF
[1593]	568	ijsplt = isplt * jsplt ! total number of processors ijsplt
[531]	569	ENDIF
	570	IF(lwp) WRITE(numout,*)' - The total number of processors over which the'
	571	IF(lwp) WRITE(numout,*)' print control will be done is ijsplt : ', ijsplt
[1593]	572	!
	573	! ! indices used for the SUM control
	574	IF( nictls+nictle+njctls+njctle == 0 ) THEN ! print control done over the default area
[3764]	575	lsp_area = .FALSE.
[1593]	576	ELSE ! print control done over a specific area
[531]	577	lsp_area = .TRUE.
	578	IF( nictls < 1 .OR. nictls > jpiglo ) THEN
	579	CALL ctl_warn( ' - nictls must be 1<=nictls>=jpiglo, it is forced to 1' )
	580	nictls = 1
	581	ENDIF
	582	IF( nictle < 1 .OR. nictle > jpiglo ) THEN
	583	CALL ctl_warn( ' - nictle must be 1<=nictle>=jpiglo, it is forced to jpiglo' )
	584	nictle = jpiglo
	585	ENDIF
	586	IF( njctls < 1 .OR. njctls > jpjglo ) THEN
	587	CALL ctl_warn( ' - njctls must be 1<=njctls>=jpjglo, it is forced to 1' )
	588	njctls = 1
	589	ENDIF
	590	IF( njctle < 1 .OR. njctle > jpjglo ) THEN
	591	CALL ctl_warn( ' - njctle must be 1<=njctle>=jpjglo, it is forced to jpjglo' )
	592	njctle = jpjglo
	593	ENDIF
[1593]	594	ENDIF
	595	ENDIF
[2442]	596	!
[3764]	597	IF( nbench == 1 ) THEN ! Benchmark
[531]	598	SELECT CASE ( cp_cfg )
[1593]	599	CASE ( 'gyre' ) ; CALL ctl_warn( ' The Benchmark is activated ' )
	600	CASE DEFAULT ; CALL ctl_stop( ' The Benchmark is based on the GYRE configuration:', &
[4147]	601	& ' cp_cfg = "gyre" in namelist &namcfg or set nbench = 0' )
[531]	602	END SELECT
	603	ENDIF
[1593]	604	!
[3764]	605	IF( 1_wp /= SIGN(1._wp,-0._wp) ) CALL ctl_stop( 'nemo_ctl: The intrinsec SIGN function follows ', &
	606	& 'f2003 standard. ' , &
	607	& 'Compile with key_nosignedzero enabled' )
	608	!
[2496]	609	END SUBROUTINE nemo_ctl
[467]	610
	611
[2496]	612	SUBROUTINE nemo_closefile
[467]	613	!!----------------------------------------------------------------------
[2496]	614	!! * ROUTINE nemo_closefile *
[467]	615	!!
	616	!! ** Purpose : Close the files
	617	!!----------------------------------------------------------------------
[1593]	618	!
	619	IF( lk_mpp ) CALL mppsync
	620	!
[1685]	621	CALL iom_close ! close all input/output files managed by iom_*
[1593]	622	!
[4147]	623	IF( numstp /= -1 ) CLOSE( numstp ) ! time-step file
	624	IF( numsol /= -1 ) CLOSE( numsol ) ! solver file
	625	IF( numnam_ref /= -1 ) CLOSE( numnam_ref ) ! oce reference namelist
	626	IF( numnam_cfg /= -1 ) CLOSE( numnam_cfg ) ! oce configuration namelist
[4624]	627	IF( lwm.AND.numond /= -1 ) CLOSE( numond ) ! oce output namelist
[4147]	628	IF( numnam_ice_ref /= -1 ) CLOSE( numnam_ice_ref ) ! ice reference namelist
	629	IF( numnam_ice_cfg /= -1 ) CLOSE( numnam_ice_cfg ) ! ice configuration namelist
[4624]	630	IF( lwm.AND.numoni /= -1 ) CLOSE( numoni ) ! ice output namelist
[4147]	631	IF( numevo_ice /= -1 ) CLOSE( numevo_ice ) ! ice variables (temp. evolution)
	632	IF( numout /= 6 ) CLOSE( numout ) ! standard model output file
	633	IF( numdct_vol /= -1 ) CLOSE( numdct_vol ) ! volume transports
	634	IF( numdct_heat /= -1 ) CLOSE( numdct_heat ) ! heat transports
	635	IF( numdct_salt /= -1 ) CLOSE( numdct_salt ) ! salt transports
[11038]	636	IF( numdct_NOOS /= -1 ) CLOSE( numdct_NOOS ) ! NOOS transports
[3294]	637
[1593]	638	!
[2442]	639	numout = 6 ! redefine numout in case it is used after this point...
	640	!
[2496]	641	END SUBROUTINE nemo_closefile
[467]	642
[2715]	643
	644	SUBROUTINE nemo_alloc
	645	!!----------------------------------------------------------------------
	646	!! * ROUTINE nemo_alloc *
	647	!!
	648	!! ** Purpose : Allocate all the dynamic arrays of the OPA modules
	649	!!
	650	!! ** Method :
	651	!!----------------------------------------------------------------------
	652	USE diawri , ONLY: dia_wri_alloc
	653	USE dom_oce , ONLY: dom_oce_alloc
	654	USE ldfdyn_oce, ONLY: ldfdyn_oce_alloc
	655	USE ldftra_oce, ONLY: ldftra_oce_alloc
	656	USE trc_oce , ONLY: trc_oce_alloc
[8059]	657	USE diainsitutem, ONLY: insitu_tem_alloc
[3680]	658	#if defined key_diadct
	659	USE diadct , ONLY: diadct_alloc
	660	#endif
[4354]	661	#if defined key_bdy
	662	USE bdy_oce , ONLY: bdy_oce_alloc
	663	#endif
[2715]	664	!
	665	INTEGER :: ierr
	666	!!----------------------------------------------------------------------
	667	!
[3764]	668	ierr = oce_alloc () ! ocean
[2715]	669	ierr = ierr + dia_wri_alloc ()
	670	ierr = ierr + dom_oce_alloc () ! ocean domain
	671	ierr = ierr + ldfdyn_oce_alloc() ! ocean lateral physics : dynamics
	672	ierr = ierr + ldftra_oce_alloc() ! ocean lateral physics : tracers
	673	ierr = ierr + zdf_oce_alloc () ! ocean vertical physics
[8059]	674	ierr = ierr + insitu_tem_alloc()
[2715]	675	!
	676	ierr = ierr + trc_oce_alloc () ! shared TRC / TRA arrays
	677	!
[3680]	678	#if defined key_diadct
	679	ierr = ierr + diadct_alloc () !
	680	#endif
[4354]	681	#if defined key_bdy
	682	ierr = ierr + bdy_oce_alloc () ! bdy masks (incl. initialization)
	683	#endif
[3680]	684	!
[2715]	685	IF( lk_mpp ) CALL mpp_sum( ierr )
	686	IF( ierr /= 0 ) CALL ctl_stop( 'STOP', 'nemo_alloc : unable to allocate standard ocean arrays' )
	687	!
	688	END SUBROUTINE nemo_alloc
	689
	690
	691	SUBROUTINE nemo_partition( num_pes )
	692	!!----------------------------------------------------------------------
	693	!! * ROUTINE nemo_partition *
	694	!!
[3764]	695	!! ** Purpose :
[2715]	696	!!
	697	!! ** Method :
	698	!!----------------------------------------------------------------------
[4990]	699	INTEGER, INTENT(in) :: num_pes ! The number of MPI processes we have
[2715]	700	!
	701	INTEGER, PARAMETER :: nfactmax = 20
	702	INTEGER :: nfact ! The no. of factors returned
	703	INTEGER :: ierr ! Error flag
	704	INTEGER :: ji
	705	INTEGER :: idiff, mindiff, imin ! For choosing pair of factors that are closest in value
	706	INTEGER, DIMENSION(nfactmax) :: ifact ! Array of factors
	707	!!----------------------------------------------------------------------
[4990]	708	!
[2715]	709	ierr = 0
[4990]	710	!
[2715]	711	CALL factorise( ifact, nfactmax, nfact, num_pes, ierr )
[4990]	712	!
[2715]	713	IF( nfact <= 1 ) THEN
	714	WRITE (numout, *) 'WARNING: factorisation of number of PEs failed'
	715	WRITE (numout, *) ' : using grid of ',num_pes,' x 1'
	716	jpnj = 1
	717	jpni = num_pes
	718	ELSE
	719	! Search through factors for the pair that are closest in value
	720	mindiff = 1000000
	721	imin = 1
	722	DO ji = 1, nfact-1, 2
	723	idiff = ABS( ifact(ji) - ifact(ji+1) )
	724	IF( idiff < mindiff ) THEN
	725	mindiff = idiff
	726	imin = ji
	727	ENDIF
	728	END DO
	729	jpnj = ifact(imin)
	730	jpni = ifact(imin + 1)
	731	ENDIF
	732	!
	733	jpnij = jpni*jpnj
	734	!
	735	END SUBROUTINE nemo_partition
	736
	737
	738	SUBROUTINE factorise( kfax, kmaxfax, knfax, kn, kerr )
	739	!!----------------------------------------------------------------------
	740	!! * ROUTINE factorise *
	741	!!
	742	!! ** Purpose : return the prime factors of n.
[3764]	743	!! knfax factors are returned in array kfax which is of
[2715]	744	!! maximum dimension kmaxfax.
	745	!! ** Method :
	746	!!----------------------------------------------------------------------
	747	INTEGER , INTENT(in ) :: kn, kmaxfax
	748	INTEGER , INTENT( out) :: kerr, knfax
	749	INTEGER, DIMENSION(kmaxfax), INTENT( out) :: kfax
	750	!
	751	INTEGER :: ifac, jl, inu
	752	INTEGER, PARAMETER :: ntest = 14
[6204]	753	INTEGER, DIMENSION(ntest) :: ilfax
[4990]	754	!
[6204]	755	! ilfax contains the set of allowed factors.
	756	ilfax(:) = (/(2**jl,jl=ntest,1,-1)/)
[2715]	757	!!----------------------------------------------------------------------
[6204]	758	! ilfax contains the set of allowed factors.
	759	ilfax(:) = (/(2**jl,jl=ntest,1,-1)/)
[2715]	760
	761	! Clear the error flag and initialise output vars
	762	kerr = 0
	763	kfax = 1
	764	knfax = 0
	765
	766	! Find the factors of n.
	767	IF( kn == 1 ) GOTO 20
	768
	769	! nu holds the unfactorised part of the number.
	770	! knfax holds the number of factors found.
	771	! l points to the allowed factor list.
	772	! ifac holds the current factor.
	773
	774	inu = kn
	775	knfax = 0
	776
	777	DO jl = ntest, 1, -1
	778	!
	779	ifac = ilfax(jl)
	780	IF( ifac > inu ) CYCLE
	781
	782	! Test whether the factor will divide.
	783
	784	IF( MOD(inu,ifac) == 0 ) THEN
	785	!
	786	knfax = knfax + 1 ! Add the factor to the list
	787	IF( knfax > kmaxfax ) THEN
	788	kerr = 6
	789	write (,) 'FACTOR: insufficient space in factor array ', knfax
	790	return
	791	ENDIF
	792	kfax(knfax) = ifac
	793	! Store the other factor that goes with this one
	794	knfax = knfax + 1
	795	kfax(knfax) = inu / ifac
	796	!WRITE (,) 'ARPDBG, factors ',knfax-1,' & ',knfax,' are ', kfax(knfax-1),' and ',kfax(knfax)
	797	ENDIF
	798	!
	799	END DO
	800
	801	20 CONTINUE ! Label 20 is the exit point from the factor search loop.
	802	!
	803	END SUBROUTINE factorise
	804
[3294]	805	#if defined key_mpp_mpi
[4990]	806
[3294]	807	SUBROUTINE nemo_northcomms
	808	!!======================================================================
	809	!! * ROUTINE nemo_northcomms *
[4230]	810	!! nemo_northcomms : Setup for north fold exchanges with explicit
	811	!! point-to-point messaging
[3294]	812	!!=====================================================================
	813	!!----------------------------------------------------------------------
[3764]	814	!!
[3294]	815	!! ** Purpose : Initialization of the northern neighbours lists.
	816	!!----------------------------------------------------------------------
[3764]	817	!! 1.0 ! 2011-10 (A. C. Coward, NOCS & J. Donners, PRACE)
[4230]	818	!! 2.0 ! 2013-06 Setup avoiding MPI communication (I. Epicoco, S. Mocavero, CMCC)
[3294]	819	!!----------------------------------------------------------------------
	820
[4230]	821	INTEGER :: sxM, dxM, sxT, dxT, jn
	822	INTEGER :: njmppmax
[3294]	823
[4230]	824	njmppmax = MAXVAL( njmppt )
	825
	826	!initializes the north-fold communication variables
	827	isendto(:) = 0
[3294]	828	nsndto = 0
	829
[4230]	830	!if I am a process in the north
	831	IF ( njmpp == njmppmax ) THEN
	832	!sxM is the first point (in the global domain) needed to compute the
	833	!north-fold for the current process
	834	sxM = jpiglo - nimppt(narea) - nlcit(narea) + 1
	835	!dxM is the last point (in the global domain) needed to compute the
	836	!north-fold for the current process
	837	dxM = jpiglo - nimppt(narea) + 2
[3294]	838
[4230]	839	!loop over the other north-fold processes to find the processes
	840	!managing the points belonging to the sxT-dxT range
[4671]	841
	842	DO jn = 1, jpni
[4230]	843	!sxT is the first point (in the global domain) of the jn
	844	!process
[4671]	845	sxT = nfiimpp(jn, jpnj)
[4230]	846	!dxT is the last point (in the global domain) of the jn
	847	!process
[4671]	848	dxT = nfiimpp(jn, jpnj) + nfilcit(jn, jpnj) - 1
[4230]	849	IF ((sxM .gt. sxT) .AND. (sxM .lt. dxT)) THEN
	850	nsndto = nsndto + 1
[4671]	851	isendto(nsndto) = jn
[4645]	852	ELSEIF ((sxM .le. sxT) .AND. (dxM .ge. dxT)) THEN
[4230]	853	nsndto = nsndto + 1
[4671]	854	isendto(nsndto) = jn
[4230]	855	ELSEIF ((dxM .lt. dxT) .AND. (sxT .lt. dxM)) THEN
	856	nsndto = nsndto + 1
[4671]	857	isendto(nsndto) = jn
[4230]	858	END IF
	859	END DO
[4671]	860	nfsloop = 1
	861	nfeloop = nlci
	862	DO jn = 2,jpni-1
	863	IF(nfipproc(jn,jpnj) .eq. (narea - 1)) THEN
	864	IF (nfipproc(jn - 1 ,jpnj) .eq. -1) THEN
	865	nfsloop = nldi
	866	ENDIF
	867	IF (nfipproc(jn + 1,jpnj) .eq. -1) THEN
	868	nfeloop = nlei
	869	ENDIF
	870	ENDIF
	871	END DO
	872
[3294]	873	ENDIF
[4230]	874	l_north_nogather = .TRUE.
[3294]	875	END SUBROUTINE nemo_northcomms
	876	#else
	877	SUBROUTINE nemo_northcomms ! Dummy routine
	878	WRITE(,) 'nemo_northcomms: You should not have seen this print! error?'
	879	END SUBROUTINE nemo_northcomms
	880	#endif
[4990]	881
[3]	882	!!======================================================================
[2496]	883	END MODULE nemogcm
[4354]	884
	885

Note: See TracBrowser for help on using the repository browser.

New URL for NEMO forge! http://forge.nemo-ocean.eu

Context Navigation

source: branches/UKMO/AMM15_v3_6_STABLE_package_reanalysis2/NEMOGCM/NEMO/OPA_SRC/nemogcm.F90 @ 11039

Download in other formats: