Changeset 4268 for branches/2013/dev_LOCEAN_CMCC_INGV_MERC_UKMO_2013
- Timestamp:
- 2013-11-20T09:35:13+01:00 (10 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
branches/2013/dev_LOCEAN_CMCC_INGV_MERC_UKMO_2013/NEMOGCM/CONFIG/AMM12/EXP00/namelist_cfg
r4265 r4268 44 44 ln_sigcrit = .true. ! use sigma coordinates below critical depth (T) or Z coordinates (F) for Siddorn & Furner stretch 45 45 ! stretching coefficients for all functions 46 rn_sbot_min = 10.0 ! minimum depth of s-bottom surface (>0) (m)47 rn_sbot_max = 7000.0 ! maximum depth of s-bottom surface (= ocean depth) (>0) (m)48 46 rn_hc = 50.0 ! critical depth for transition to stretched coordinates 49 !!!!!!! Envelop bathymetry50 rn_rmax = 0.3 ! maximum cut-off r-value allowed (0<r_max<1)51 !!!!!!! SH94 stretching coefficients (ln_s_sh94 = .true.)52 rn_theta = 6.0 ! surface control parameter (0<=theta<=20)53 rn_bb = 0.8 ! stretching with SH94 s-sigma54 !!!!!!! SF12 stretching coefficient (ln_s_sf12 = .true.)55 rn_alpha = 4.4 ! stretching with SF12 s-sigma56 rn_efold = 0.0 ! efold length scale for transition to stretched coord57 rn_zs = 1.0 ! depth of surface grid box58 ! bottom cell depth (Zb) is a linear function of water depth Zb = H*a + b59 rn_zb_a = 0.024 ! bathymetry scaling factor for calculating Zb60 rn_zb_b = -0.2 ! offset for calculating Zb61 !!!!!!!! Other stretching (not SH94 or SF12) [also uses rn_theta above]62 rn_thetb = 1.0 ! bottom control parameter (0<=thetb<= 1)63 47 / 64 48 !----------------------------------------------------------------------- … … 67 51 rn_rdt = 300. ! time step for the dynamics (and tracer if nn_acc=0) 68 52 nn_baro = 30 ! number of barotropic time step ("key_dynspg_ts") 69 rn_hmin = -3. ! min depth of the ocean (>0) or min number of ocean level (<0)70 rn_e3zps_min= 20. ! partial step thickness is set larger than the minimum of71 rn_e3zps_rat= 0.1 ! rn_e3zps_min and rn_e3zps_rat*e3t, with 0<rn_e3zps_rat<172 53 rn_rdtmin = 300. ! minimum time step on tracers (used if nn_acc=1) 73 54 rn_rdtmax = 300. ! maximum time step on tracers (used if nn_acc=1) 74 55 rn_rdth = 300. ! depth variation of tracer time step (used if nn_acc=1) 75 jphgr_msh = 0 ! type of horizontal mesh76 56 ppglam0 = 999999.0 ! longitude of first raw and column T-point (jphgr_msh = 1) 77 57 ppgphi0 = 999999.0 ! latitude of first raw and column T-point (jphgr_msh = 1) … … 80 60 ppe1_m = 999999.0 ! zonal grid-spacing (degrees) 81 61 ppe2_m = 999999.0 ! meridional grid-spacing (degrees) 82 ppsur = -1743.9226455005262! ORCA r4, r2 and r05 coefficients83 ppa0 = 104.72622118274212! (default coefficients)84 ppa1 = 100.04692422373907!62 ppsur = 999999.0 ! ORCA r4, r2 and r05 coefficients 63 ppa0 = 999999.0 ! (default coefficients) 64 ppa1 = 999999.0 ! 85 65 ppkth = 23.563 ! 86 66 ppacr = 9.0 !
Note: See TracChangeset
for help on using the changeset viewer.