Timeline
2019-12-06:
- 21:40 Changeset [12107] by
-
update to the head of the trunk
- 21:23 Changeset [12106] by
-
fix to compile in debug mode + rm debug WRITE
- 19:32 Changeset [12105] by
-
fix WED025 namelist
- 19:24 Changeset [12104] by
-
fix merging issue with duplicated files
- 18:56 Changeset [12103] by
-
Remove branch as changes merged back.
- 18:56 Changeset [12102] by
-
Fix syntax error and relax diagnostic check. See Met Office utils ticket 195.
- 18:45 Changeset [12101] by
-
merge ENHANCE-03_domcfg and ENHANCE-02_ISF_nemo
- 18:02 Changeset [12100] by
-
create UKMO tools merge branch
- 17:13 Changeset [12099] by
-
Tiny fix for AGRIF to compile…
- 17:12 Changeset [12098] by
-
Tiny fix for AGRIF to compile…
- 16:55 Changeset [12097] by
-
Addition of AGRIF directives to enable compilation with key_agrif (ticket #2175)
- 16:27 Changeset [12096] by
-
Synchronizing with /NEMO/trunk@12072 (ticket #2194)
- 15:34 Changeset [12095] by
-
First iteration on correcting u or v depth points when using enveloping bathy
This needs tobe done also for cases other than vec
Code is very ineffiecint as written all in dynspg_ts , this should be rewritten
to only calculate some variables at run start.
- 15:31 Changeset [12094] by
-
Allow ts_init to work properly for already interpolated scoords
Allow bdy to be spread over arbitary rim points
- 15:22 Changeset [12093] by
-
Deleting badly created dev_r11943_TOP-01_ENHANCE-11_CEthe
- 15:13 Changeset [12092] by
-
Create C. Ethe merged dev branches : dev_r11219_TOP-01_cethe_PISCES_LBC and dev_r11643_ENHANCE-11_CEthe_Shaconemo_diags & phasing with trunk rev 11943
- 15:05 Changeset [12091] by
-
Deleting badly created dev_r11943_TOP-01_ENHANCE-11_CEthe
- 14:37 Changeset [12090] by
-
dev_r11943_TOP-01_ENHANCE-11_CEthe
- 14:35 Changeset [12089] by
-
Create C. Ethe merged dev branches : dev_r11219_TOP-01_cethe_PISCES_LBC and dev_r11643_ENHANCE-11_CEthe_Shaconemo_diags & phasing with trunk rev 11943
- 14:13 Changeset [12088] by
-
Updating GO8 Package branch to bring in required BDY bug fixes frouse with CO8
The mirror branch is already updated to have this change, where we merge in the mirror to the package branch
- 12:33 Changeset [12087] by
-
C08 package branch AMM15+WAD Relative to MIRROR@12083
- 12:28 Changeset [12086] by
-
Changes required for enveloping bathy and WAD Relative to MIRROR@12083
- 12:26 Changeset [12085] by
-
Changes required for enveloping bathy and WAD
- 12:13 2020WP/ENHANCE-08_davestorkey_fix_2D_vorticity_trends created by
-
- 12:10 Ticket #2348 (2D vorticity trend diagnostics need to updated to use XIOS) created by
-
[…] ==== Context The 2D vorticity trends diagnostics (ln_trd_vor=T) …
- 12:06 Changeset [12084] by
-
Minor synchronization with "dev_r11085_ASINTER-05_Brodeau_Advanced_Bulk"
- 12:05 Changeset [12083] by
-
Update Mirror to bring in required bdy bug fixes for CO8
- 11:58 Changeset [12082] by
-
Minor synchronization with "dev_r11085_ASINTER-05_Brodeau_Advanced_Bulk"
- 11:52 Changeset [12081] by
-
Minor synchronization with "dev_r11085_ASINTER-05_Brodeau_Advanced_Bulk"
- 11:32 2019WP/ASINTER-05_Brodeau_Advanced_Bulk edited by
-
(diff)
- 10:30 Changeset [12080] by
-
update nemo trunk
2019-12-05:
- 21:58 2020WP/VALID-06_METO_cpl_interface created by
-
- 21:56 2020WP/ENHANCE-07_METO_precip_over_icesheet_cpl created by
-
- 21:47 2020WP/ENHANCE-06_JMMP_ICB created by
-
- 21:44 2020WP/VALID-05_mathiot_debug created by
-
- 21:28 2020WP/ENHANCE-05_mathiot_REBUILD created by
-
- 21:21 2020WP/ENHANCE-04_dford_OBSOP_BGC created by
-
- 21:17 2020WP/ENHANCE-03_djlea_OBSOP_climato_on_obs created by
-
- 21:12 2020WP/SI3-02_dcarneir_OBSOP_si_thickness created by
-
- 21:08 2020WP/HPC-01_daley_GPU created by
-
- 21:06 2020WP/ENHANCE-02_daley_Kara_mld created by
-
- 21:01 2020WP/VALID-04_storkey_ORCA_evaluation created by
-
- 20:59 2020WP/VALID-03_deazer_AMM15_evaluation created by
-
- 20:56 2020WP/VALID-02_mireck_SAS created by
-
- 20:53 2020WP/VALID-01_ayoung_SETTE created by
-
- 19:47 Changeset [12079] by
-
include ENHANCE-03_closea in UKMO merge branch
- 19:31 Changeset [12078] by
- 18:41 Changeset [12077] by
-
include ENHANCE-02_ISF_nemo in UKMO merge branch
- 18:28 Changeset [12076] by
- 18:07 Changeset [12075] by
-
Synchronizing with /NEMO/trunk@12072 (ticket #2175)
- 17:54 Changeset [12074] by
-
Fixed namelist hphi/hpgj issue + added sanity check for air humidity.
- 16:52 2019WP/HPC-11_Mirek_Andrejczuk_IO_with_XIOS edited by
-
(diff)
- 16:46 2019WP/HPC-11_Mirek_Andrejczuk_IO_with_XIOS edited by
-
(diff)
- 16:11 Changeset [12073] by
-
#2346, correct lbc call for depths
- 16:07 Changeset [12072] by
-
#2346, correct lbc call for depths
- 16:02 Ticket #2347 (Uninitialized values of hdivn for first time step.) created by
-
==== Context When computing the horizontal divergence in div_hor it is …
- 14:10 Changeset [12071] by
-
Changes required for enveloping bathy and WAD
- 14:08 Changeset [12070] by
-
Wrong revision point for comond rose suite extract
- 14:05 Changeset [12069] by
-
Changes required for enveloping bathy and WAD
- 13:18 Changeset [12068] by
-
2019/UKMO_MERGE_2019 : Merging in changes from ENHANCE-02_ISF_nemo.
- 13:12 Changeset [12067] by
-
Branch to merge 2019 UKMO developments.
- 12:56 2019WP/KERNEL-02_Storkey_Coward_IMMERSE_first_steps edited by
-
(diff)
- 12:19 Changeset [12066] by
-
Synchronizing with /utils/tools@11926 (ticket #2175)
- 12:06 Changeset [12065] by
-
Synchronizing with /NEMO/trunk@12055 (ticket #2194)
- 11:59 Changeset [12064] by
-
Added sanity/consistence check on air humidity.
- 11:46 Changeset [12063] by
- 11:44 Ticket #1858 (bug when reading external data in BDY?) closed by
-
invalid
- 10:57 Changeset [12062] by
-
changes required by N.J. review
- 10:28 2020WP/ENHANCE-01_davestorkey_fix_3D_momentum_trends edited by
-
(diff)
- 10:26 2020WP/ENHANCE-01_davestorkey_fix_3D_momentum_trends created by
-
- 09:44 Changeset [12061] by
-
Catch up with r12055 of trunk…
- 09:36 Changeset [12060] by
-
GMED 450 print only with lwp/lwm
- 09:34 Changeset [12059] by
- 08:48 Changeset [12058] by
-
Supressed 1 useless call to "lbc_lnk"…
2019-12-04:
- 19:22 Changeset [12057] by
- 18:55 Changeset [12056] by
-
Further modifications related to coding style and conventions, addition of citations of equations, and further reduction of the number of real-valued literals used in module tide_mod (ticket #2194)
This changeset affects results produced by the AMM12 and SPITZ12 reference model configurations.
- 17:37 Ticket #2346 (Sign change in lbc call for total depth in split explicit routine) created by
-
==== Context dynspg_ts module ==== Analysis line 688, add sign change in …
- 17:33 2019WP/KERNEL-02_Storkey_Coward_IMMERSE_first_steps/Report edited by
-
(diff)
- 17:33 2019WP/KERNEL-02_Storkey_Coward_IMMERSE_first_steps/Report edited by
-
(diff)
- 17:26 2019WP/KERNEL-02_Storkey_Coward_IMMERSE_first_steps/Report created by
-
- 17:21 Ticket #2327 (Out of bound vertical index in 4th order vertical advection) closed by
-
fixed
- 17:20 Changeset [12055] by
- 17:16 Changeset [12054] by
- 17:00 Ticket #2335 (Missing lbc calls in WAD scheme) closed by
-
fixed
- 16:59 Changeset [12053] by
-
#2335, add missing lbc call with wad
- 16:59 Changeset [12052] by
-
#2335, add missing lbc call with wad
- 16:52 Changeset [12051] by
-
Writing the doc for SBCBLK!
- 16:42 Ticket #2334 (Wrong initialization of T/S open boundary data if set from initial state) closed by
-
fixed
- 16:38 Changeset [12050] by
-
#2334, bdy init from initial T/S
- 16:36 Changeset [12049] by
-
#2334, bdy init from initial T/S
- 16:32 Changeset [12048] by
-
#2222, add small tolerance for bathymetry matching test; correct U-V parent bathymetry on child grid in the special case of s coord into s coord
- 15:27 2019WP/ENHANCE-11_CEthe_Shaconemo_diags edited by
-
(diff)
- 14:10 Ticket #2345 (Avoid a division by zero when applying the volume control along BDYs) created by
-
[…] ==== Context A division by zero may occur when using the BDYs …
- 12:52 Ticket #2344 (issues with 3D momentum trends diagnostics and split-explicit ...) created by
-
[…] ==== Context There are various issues with the 3D momentum trends …
- 12:49 Changeset [12047] by
-
Replacement of local constants in subroutine tide_pulse of module tide_mod by existing module variables (ticket #2194)
This modification slightly changes many tidal-constituent frequencies computed by subroutine tide_pulse, with the exception of the frequencies of the S1, S2, and S4 tidal constituents.
- 11:51 Changeset [12046] by
-
Writing the doc for SBCBLK!
2019-12-03:
- 18:24 Changeset [12045] by
-
Modifications related to coding style and conventions, and addition of a reference in module tide_mod (ticket #2194)
- 17:48 Changeset [12044] by
-
Bugfix to only alter times of SLA when bkg is time-averaged.
- 16:53 Changeset [12043] by
-
Control consistency of input freq. of "qsr", "ln_dm2dc" when "ln_skin_wl=T".
- 16:41 Changeset [12042] by
-
Reduction of the number of real-valued literals used in subroutine astronomic_angle of module tide_mod (ticket #2194)
- 15:55 Changeset [12041] by
-
2019/dev_r11943_MERGE_2019: Bug fix for ln_top_euler=T case.
- 15:50 Changeset [12040] by
-
Got rid of array "tsk" as it was useless.
- 15:42 Changeset [12039] by
-
Got rid of array "tsk" as it was useless.
- 15:19 Changeset [12038] by
-
Tiny bug fix…
- 13:21 Changeset [12037] by
-
Adjustment of the location of a comment line (ticket #2194)
- 13:00 Changeset [12036] by
-
Fix to update times only when bkg time-averged.
- 12:20 Changeset [12035] by
-
Added option to remove tides from SLA by taking average over 24h50m.
- 11:44 Changeset [12034] by
-
Change chloro units for PISCES
- 11:04 Changeset [12033] by
-
Correction of the inclusion of regression coefficients in the output file and minor adjustments of standard output (ticket #2175)
2019-12-02:
- 19:08 Changeset [12032] by
-
ENHANCE-02_ISF_nemo: improve isf debug with a basic checksum
- 18:23 Changeset [12031] by
-
Keep up with r12030 of trunk + latex doc for SBCBLK!
- 17:34 Changeset [12030] by
-
Branch 2019/dev_r11943_MERGE_2019. Work-around for Cray compiler which does not like new-lines in internal files used for namelist reads. This change alters new-lines to spaces which should work universally. The option to use new-lines can be reactivated manually in load_nml (lib_mpp.F90) if needed for future debugging. Also prevented attempts to write to a negative unit number in ctl_opn when calling argument is not set.
- 17:24 Changeset [12029] by
-
Making "sbcblk.F90" compliant for AGRIF (function returns a scalar)
- 16:50 Changeset [12028] by
-
Minor bug-fixes…
- 15:59 Changeset [12027] by
-
2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps : Bug fix for ln_top_euler=T case.
- 15:54 Changeset [12026] by
- 14:41 Changeset [12025] by
-
Put back original namelist ice values of trunk revision 11640
- 12:33 Changeset [12024] by
-
Small fixes…
- 12:33 Changeset [12023] by
-
Activation of the computation of daily M2-detided averages in reference configuration AMM12 (ticket #2175)
- 12:13 Changeset [12022] by
-
Alternative implementation for the computation of daily detided averages (currently M2-detided averages only) of model diagnostics (ticket #2175)
- 10:02 Changeset [12021] by
2019-12-01:
- 19:18 Changeset [12020] by
-
Improved syntax…
2019-11-30:
- 15:48 Changeset [12019] by
-
Started to re-write the "sbcblk" par ot the doc…
2019-11-29:
- 22:57 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:54 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:50 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:48 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:47 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:46 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:45 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:43 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:42 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:41 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 22:38 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 20:45 Changeset [12018] by
-
Addition of a rudimentary tool for the postprocessing of intermediate model output for multiple-linear-regression analysis (see ticket #2175)
- 17:46 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 17:28 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 17:27 Changeset [12017] by
-
minor corrections in sette dev branch
- 17:12 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 17:10 Changeset [12016] by
- 16:59 Changeset [12015] by
- 16:56 Changeset [12014] by
-
Further adjustment of the configuration of multiple-linear-regression analysis in reference configuration AMM12 (ticket #2175)
- 16:25 Changeset [12013] by
-
Adjustment of the configuration of multiple-linear-regression analysis in reference configuration AMM12 (ticket #2175)
- 16:07 Ticket #2343 (minor bug to do with Euler timestepping in TOP) created by
-
[…] ==== Context In TOP/TRP/trcnxt.F90 we have the following code to …
- 16:06 Changeset [12012] by
- 15:01 Changeset [12011] by
-
Update of the default configuration of multiple-linear-regression analysis (ticket #2175)
- 13:50 Changeset [12010] by
-
Enabling of the grid-type propagation from the analysed fields to the corresponding scalar-product fields in the intermediate output for multiple-linear-regression analysis (ticket #2175)
- 10:47 Changeset [12009] by
-
cmip6_diag : minor corrections
- 09:23 Changeset [12008] by
-
cmip6_dev : minior corrections
2019-11-28:
- 21:55 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 21:54 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 21:53 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 21:51 2019WP/HPC-12_Mocavero_mpi3 edited by
-
(diff)
- 17:33 Changeset [12007] by
-
Remove stoichiometric balancing.
- 17:29 Changeset [12006] by
-
Further update following merge.
- 17:28 Changeset [12005] by
-
Branch for test with no phytoplankton balancing.
- 17:19 Changeset [12004] by
-
Correct merge errors from previous commit.
- 16:47 Changeset [12003] by
-
Merge in change relating to pressure correction.
- 14:30 Changeset [12002] by
-
Minor bug coorection
- 13:34 Changeset [12001] by
-
Finalisation of CMIP6 diags implementation, tests directory
- 13:22 Changeset [12000] by
-
add suggestion ticket #1928
- 13:11 Changeset [11999] by
-
branch to add the ticket #1928 suggestion
- 13:07 Changeset [11998] by
-
Finalisation of CMIP6 diags implementation, src directory
- 12:49 Changeset [11997] by
-
Better namelist sanity test in sbcblk.F90 w.r.t algo choice.
- 12:36 Ticket #1840 (optional variables) closed by
-
invalid: Indeed in XIOS Fortran interface all those arguments are optional. Given …
- 12:28 Changeset [11996] by
-
Only 1 call to each algo in "sbcblk.F90"; + added "no-skin" cases in STATION_ASF
- 11:35 Changeset [11995] by
-
Finalisation of CMIP6 diags implementation, src directory
- 11:21 Changeset [11994] by
-
copy dev_r11265_ASINTER-01_Guillaume_ABL1D branch @rev11937 as base for merging with dev_r11085_ASINTER-05_Brodeau_Advanced_Bulk branch @rev11988
- 11:20 Changeset [11993] by
-
trunk : undo bad commit. Oups
2019-11-27:
- 18:40 Changeset [11992] by
-
ENHANCE-03_closea: cosmetic changes
- 18:32 Changeset [11991] by
-
ENHANCE-03_closea: rm useless variable, rename some variable and add comments
- 16:43 Changeset [11990] by
-
Get the nitrogen balancing working with 3D chlorophyll increments.
- 16:13 Changeset [11989] by
-
cmip6 diag : finalisation of CMIP6 diags implementation
- 16:08 Changeset [11988] by
-
Typo…
- 15:50 Changeset [11987] by
-
ENHANCE-02_ISF_nemo: changes needed after Dave's review
- 15:43 Changeset [11986] by
-
ENHANCE-02_ISF_domcfg: changes needed after Dave's review
- 15:01 Changeset [11985] by
-
mk_ENHANCE-03_domcfg: fix issue when compiling tools without cpp_TOOLS.fcm file
- 14:52 Changeset [11984] by
-
Default bulk algo back to NCAR in ORCA2_ICE_PISCES…
- 14:36 Changeset [11983] by
-
Removal of module diaharm (ticket #2175)
- 14:07 Changeset [11982] by
-
maketools_ENHANCE-03_domcfg: update to maketools needed to add preprocessing step
- 13:25 Changeset [11981] by
-
mk_ENHANCE-03_domcfg: forgot to add Fmake_tools_bld.sh
- 13:19 Changeset [11980] by
-
mk_ENHANCE-03_domcfg: add a pre-processing step to compile tools
- 12:55 Changeset [11979] by
-
Bug fixes: update indexing, and initialise arrays after allocation.
- 12:51 Changeset [11978] by
-
Update BDY scheme to remove dead zone.
- 12:45 Changeset [11977] by
-
Branch for minor code changes as described in https://code.metoffice.gov.uk/trac/utils/ticket/305.
- 12:06 Changeset [11976] by
-
Ticket #1840, changes after review
- 11:41 Changeset [11975] by
-
Addition of further metadatum in multiple-linear-regression analysis configuration for tidal harmonic analysis (ticket #2175)
- 10:58 Changeset [11974] by
-
Addition of metadata to the configuration of tidal harmonic-regressor pairs for multiple-linear-regression analysis (ticket #2175)
- 10:53 Changeset [11973] by
-
2019/ENHANCE-02_ISF_nemo_TEST_MERGE : bug fixes.
2019-11-26:
- 19:44 Changeset [11972] by
-
Inclusion of minimum, maximum, and average values of the time variable available to compute regressors (diamlr_time) in the intermediate-data output for multiple-linear-regression analysis (ticket #2175)
- 18:17 Changeset [11971] by
-
Inclusion of average regressor values, regressor metadata, and references to the analysed fields in the intermediate-data output for multiple-linear-regression analysis (ticket #2175)
- 17:37 Users/Homepage/News edited by
-
(diff)
- 17:34 Users/Agenda/2020-01-15 created by
-
- 16:06 Changeset [11970] by
-
2019/ENHANCE-02_ISF_nemo_TEST_MERGE : copy changes from Pierre's branch.
- 15:58 Changeset [11969] by
-
Copy of Pierre's branch to test merge with IMMERSE_first_steps branch.
- 15:56 Changeset [11968] by
-
Delete useless branch.
- 15:11 Changeset [11967] by
-
2019/ENHANCE-02_ISF_nemo_TEST_MERGE : Update to rev 11953.
- 13:03 Changeset [11966] by
-
Copy of Pierre's ISF branch to test merging process with IMMERSE_first_steps branch.
- 12:39 Changeset [11965] by
-
Save updates for special viscosity adjustments in S polar region.
- 12:11 Changeset [11964] by
-
Branch to apply variable viscosity at high S latitudes as
per Pierre's special equivalent based on an earlier revison of the package
branch.
- 12:08 Changeset [11963] by
-
More accurate comments/info, better syntax, simplifications, etc
2019-11-25:
- 23:31 Changeset [11962] by
-
Syntax improvements and minor bug fixes…
- 20:40 Changeset [11961] by
-
Adjustments to variable names and overlong lines (ticket #2175)
- 18:19 Changeset [11960] by
-
Branch 2019/dev_r11943_MERGE_2019. Merge in changes from 2019/dev_r11613_ENHANCE-04_namelists_as_internalfiles. (svn merge -r 11614:11954). Resolved tree conflicts and one actual conflict. Sette tested(these changes alter the ext/AGRIF reference; remember to update). See ticket #2341
- 16:25 Changeset [11959] by
-
Activation of multiple-linear-regression analysis in reference configuration AMM12 (ticket #2175)
- 14:46 Changeset [11958] by
-
Branch to test use of nitrogen balancing scheme with 3D chlorophyll increments in AtlantOS OSSEs.
- 12:33 2020WP edited by
-
(diff)
2019-11-24:
- 12:04 Changeset [11957] by
-
Better consistency with current trunk…
2019-11-23:
- 20:47 Ticket #2342 (missing initialisation in bdyini) created by
-
==== Context Spurious values in ibr_max (seen in ocean.output) from …
2019-11-22:
- 19:38 Changeset [11956] by
-
Inclusion of an example configuration of multiple-linear-regression analysis (ticket #2175)
- 18:44 Changeset [11955] by
-
Bug fix for MPI3 neighbourhood collectives halo exchange. See ticket #2011
- 17:15 Changeset [11954] by
-
Branch 2019/dev_r11613_ENHANCE-04_namelists_as_internalfiles. Merge in trunk changes up to 11943 in preparation for end of year merge
- 17:09 Changeset [11953] by
-
Compilation errors fixed in asminc.F90 and diaobs.F90
- 17:08 Changeset [11952] by
-
Compilation errors fixed in asminc.F90
- 16:52 Changeset [11951] by
-
fixed bug in stress calculation
- 16:44 Changeset [11950] by
-
Addition of a placeholder substitution mechanism for the inclusion of tidal-constituent parameters, which are available from the tidal-forcing implementation, in regressor expressions for multiple-linear-regression analysis (see ticket #2175)
- 15:29 Changeset [11949] by
-
Merge in changes from 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. This just creates a fresh copy of this branch to use as the merge base. See ticket #2341
- 14:34 Changeset [11948] by
-
Including obs_readsnowdepth.F90 to OBS folder
- 13:23 Changeset [11947] by
-
Create a 2019 merge branch named 2019/dev_r11943_MERGE_2019. See ticket #2341
- 13:18 Ticket #2341 (Start 2019 MERGE branch) created by
-
==== Context Start a 2019 UK Merge branch to try merging UK …
- 12:55 Changeset [11946] by
-
Branch 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. Merge remaining trunk changes from 11831 to 11943 (last change to trunk at 11907)
- 12:33 Changeset [11945] by
-
dev_r11265_ABL: remove obsolete sn_tdif from all namelist_cfg files, add a use fldread in icesbc.F90 and update mercator arch file to pass sette tests with agrif and remove a debug line in ablrst.F90 (#2131)
- 11:35 Changeset [11944] by
-
Changing asminc.F90 in order to avoid merge conflicts
- 07:49 Ticket #2340 (Segmentation fault in river runoffs) created by
-
==== Context River runoffs can cause a segmentation fault. ==== Analysis …
2019-11-21:
- 18:09 2019WP/SI3-10_EAP_rheology edited by
-
(diff)
- 14:38 2020WP/DATAINT-01_sciliberti_IMMERSE_Interfaces edited by
-
(diff)
- 14:36 2020WP/DATAINT-01_sciliberti_IMMERSE_Interfaces edited by
-
(diff)
- 14:24 2020WP/DATAINT-01_sciliberti_IMMERSE_Interfaces edited by
-
(diff)
- 14:20 2020WP/DATAINT-01_sciliberti_IMMERSE_Interfaces edited by
-
(diff)
- 14:18 Ticket #2339 (ASINTER-02_emanuelaclementi_Waves) created by
-
[…] ==== Context The developments includes enhanced ocean mixing due …
- 14:16 2020WP/DATAINT-01_sciliberti_IMMERSE_Interfaces edited by
-
(diff)
- 14:16 Ticket #2338 (DATAINT-01_sciliberti_IMMERSE_Interfaces) created by
-
[…] ==== Workplan action Wikipage: …
- 14:14 2020WP/forge.ipsl.jussieu.fr/nemo/wiki/2020WP/ASINTER-01_eclementi_Waves edited by
-
(diff)
- 14:13 2020WP/SI3-01_stefryn_EAP_rheology edited by
-
(diff)
- 14:12 2020WP/DATAINT-01_sciliberti_IMMERSE_Interfaces edited by
-
(diff)
- 14:11 2020WP/forge.ipsl.jussieu.fr/nemo/wiki/2020WP/ASINTER-01_eclementi_Waves created by
-
- 14:10 Ticket #2337 (SI3-01_stefryn_EAP_rheology) created by
-
[…] ==== Context … ==== Proposal …
- 14:10 2020WP/DATAINT_001_sciliberti_Interfaces edited by
-
(diff)
- 14:10 2020WP/DATAINT-01_sciliberti_IMMERSE_Interfaces created by
-
- 14:09 2020WP/DATAINT_001_sciliberti_Interfaces edited by
-
(diff)
- 14:07 2020WP/DATAINT_001_sciliberti_Interfaces edited by
-
(diff)
- 14:06 2020WP/DATAINT_001_sciliberti_Interfaces edited by
-
(diff)
- 13:59 2020WP/ENHANCE-14_smueller_OSMOSIS_streamlining created by
-
- 13:56 2020WP/PHYPRO-01_agn_OSMOSIS_science created by
-
- 13:52 Changeset [11943] by
-
Ticket #2314: remove duplicated definition
- 13:21 2020WP/AGRIF-01_mathiot_multigrid_load_balancing edited by
-
(diff)
- 13:19 Ticket #2336 (AGRIF-01_mathiot_multigrid_load_balancing) created by
-
[…] ==== Context … ==== Proposal …
- 13:11 2020WP/AGRIF-01_mathiot_multigrid_load_balancing created by
-
- 13:01 2020WP/AGRIF_01_mathiot_multigrid_load_balancing created by
-
- 12:22 2020WP/SI3-01_stefryn_EAP_rheology created by
-
- 11:15 2020WP/DATAINT_001_sciliberti_Interfaces created by
-
- 11:13 Changeset [11942] by
-
Integration of a version of the IOM context setup for multiple-linear-regression analysis that results in the output of a full set of intermediate data for a configured regression analysis (see ticket #2175)
- 10:05 Changeset [11941] by
-
Ticket #2314: add coupling timers
2019-11-20:
- 22:48 Changeset [11940] by
-
Add MPI3 neighbourhood collectives halo exchange in LBC and call it in tracer advection FCT scheme #2011
- 17:32 Changeset [11939] by
-
Changing GO6 package to include sea ice thickness DA
- 15:45 Changeset [11938] by
-
Reverting commit to version where only OBS scripts were updated.
- 14:34 Changeset [11937] by
-
dev_r11265_ABL: put back lbc_lnk for tracers to ensure mpp reproductibility (#2131)
- 11:49 Changeset [11936] by
-
Copying GO6 package branch to make changes related to sea-ice thickness DA
- 11:37 Changeset [11935] by
-
Changing SBC scripts (sbc_oce and sbcice_cice) to include sea ice thickness
- 10:47 Changeset [11934] by
-
UKMO/NEMO_4.0.1_momentum_trends : code changes (equivalent to rev 11917 of NEMO 4.0 branch).
2019-11-19:
- 20:10 Changeset [11933] by
-
add eap stresses, constant anisotropy for now
- 18:45 Changeset [11932] by
-
Changes in OBS and SBC routines for sea ice thickness data assimilation
- 18:30 Changeset [11931] by
-
ENHANCE-02_ISF_nemo: add comments, improve memory usage of ln_isfcpl_cons option, fix issue in ISOMIP+ configuration
- 17:41 Changeset [11930] by
-
New functional "stp_ctl" for STATION_ASF, test-case launch script and python diagnostics…
- 17:22 Changeset [11929] by
-
Changing diaobs.F90
- 16:24 Changeset [11928] by
-
Changes to include sea ice thickness data assimilation
- 15:49 Changeset [11927] by
-
Fix compile errors and resolve conflicts
2019-11-18:
- 18:55 Changeset [11926] by
-
Move maketools to the corresponding directory /utils/build, along with makenemo
The tools folder will now get the script with an external reference.
- 15:49 Changeset [11925] by
-
Extension of the test for the existence of a regression-analysis configuration in the IOM context setup for multiple-linear-regression analysis (ticket #2175)
- 09:48 Changeset [11924] by
-
Ticket #2323 add xml files missing in a previous commit
- 09:38 Changeset [11923] by
-
Ticket #2323 all other SETTE/tests configurations
2019-11-17:
- 22:40 Ticket #2335 (Missing lbc calls in WAD scheme) created by
-
==== Context Wetting and drying scheme (flux blocking case, e.g. …
2019-11-15:
- 21:12 Changeset [11922] by
-
Addition of output of the elapsed model time for multiple-linear-regression analysis (ticket #2175)
- 19:03 Changeset [11921] by
-
Addition of a test for the existence of a regression-analysis configuration to the IOM context setup for multiple-linear-regression analysis (ticket #2175)
- 18:38 Changeset [11920] by
-
add calculation of the look-up table for the yield surface
- 17:25 Changeset [11919] by
-
Move BULL arch file to misc folder
- 17:01 Changeset [11918] by
-
Merged in ability to start from a sea ice restart file
- 16:56 Changeset [11917] by
-
UKMO/NEMO_4.0_momentum_trends :
- Refactor so that ZDF trend always includes all bottom friction contributions. The budget can now be closed by including the ZDF trend without any BFR trends.
- Some tidying of trddyn.F90.
- 16:44 Changeset [11916] by
-
Merged in all the changes in NEMO4.0_fix_cpl_oce_only (up to revison 11832)
- 16:23 Changeset [11915] by
-
Make a NEMO4.0.1. branch off of the mirror
- 16:21 Changeset [11914] by
-
Merging in the rest of the NEMO4 GC coupling branch up to revision 11446
- 16:16 Changeset [11913] by
-
Merge in bulk of coupling changes.
- 15:46 Changeset [11912] by
-
Make branch off of NEMO4.0.1 mirror
- 13:54 Changeset [11911] by
-
Addition of a quotation mark that was missing in module diamlr (ticket #2175)
- 13:38 Changeset [11910] by
-
Inclusion of a skeletal version of the new module diamlr that will be used to manage the IOM context for multiple-linear-regression analysis of model fields (ticket #2175)
2019-11-14:
- 21:31 Changeset [11909] by
-
Detachment of the context-definition closure from subroutine iom_init of module iom to enable additional context definition outside subroutine iom_init (ticket #2175).
The closure of the context definition is now available in the new public subroutine iom_init_closedef of module iom. By default, this subroutine is called by subroutine iom_init, so that the default behaviour of iom_init remains unchanged. Optionally, subroutine iom_init can now be made to keep the context definition open by setting the optional argument ld_closedef to .FALSE.; this enables continued definition of the context until subroutine iom_init_closedef is explicitly called.
- 20:20 Changeset [11908] by
-
ENHANCE-02_ISF_nemo: fix issue initialisation after ice sheet coupling step
- 20:14 Ticket #2334 (Wrong initialization of T/S open boundary data if set from initial state) created by
-
==== Context In nambdy, if nn_tra_dta = 0 then open boundary data arrays …
- 18:15 Changeset [11907] by
-
Implementation of syntax highlighting for inline code
- 18:08 Changeset [11906] by
-
New lexer rule to highlight CPP key (key_...)
- 17:25 Changeset [11905] by
-
STATION_ASF test-cases runs 3 full years of test…
- 15:18 2020WP edited by
-
(diff)
- 15:12 2020WP edited by
-
(diff)
- 14:28 2020WP edited by
-
(diff)
- 14:17 2020WP edited by
-
(diff)
- 11:40 Changeset [11904] by
-
Branch to update 3D momentum trends diagnostics to work with split-explicit timestepping.
- 11:34 Changeset [11903] by
-
UKMO/NEMO_4.0_momentum_trends : modification to bottom friction trend diagnostic.
- 11:08 Ticket #2333 (calls to iom_put) created by
-
==== Context There are places where diagnostics are calculated …
2019-11-13:
- 20:07 Changeset [11902] by
-
ENHANCE-02_ISF_nemo: add check on presence of restart variables
- 18:27 Changeset [11901] by
-
Ticket #2323 SI3 restart read/write with XIOS for AGRIF
- 18:14 Changeset [11900] by
-
v4.0.1: bugfix in usrdef_nam.F90 for CANAL test case
- 18:14 Changeset [11899] by
-
trunk: bugfix in usrdef_nam.F90 for CANAL test case
- 17:10 Changeset [11898] by
-
Following up on Emma's branch to consolidate sea ice thickness updates for NEMO IAU
- 13:27 Changeset [11897] by
-
Change to add basal melt only if the SST is above the freezing point
- 12:40 Changeset [11896] by
-
ENHANCE-02_ISF_nemo: update ISOMIP+ test case configuration
- 12:39 Changeset [11895] by
-
ENHANCE-02_ISF_nemo: update ISOMIP+ test case configuration
- 12:38 Changeset [11894] by
-
Branch to stop iceberg melting is the temperature is above the freezing point
- 09:48 Changeset [11893] by
-
Ticket #2323 read/write SI3 restart file
- 09:44 Changeset [11892] by
-
Improving test-case STATION_ASF, use of relevant heights and depth for PAPA station.
2019-11-12:
- 16:17 Changeset [11891] by
- 16:17 Changeset [11890] by
- 12:24 Changeset [11889] by
-
ENHANCE-02_ISF_nemo: add ISOMIP+ test case configuration
- 10:46 Ticket #2332 (Reduce unnecessary computation in sbccpl.F90) created by
-
[…] ==== Context In sbccpl.F90 in sbc_cpl_ice_tau there is an if …
- 10:26 Ticket #2331 (restructure ice_dyn_rhg_evp) created by
-
==== Context In subroutine ice_dyn_rhg_evp there is a logical flag …
- 10:11 Ticket #2330 (Failure of SPITZ12 SETTE tests) created by
-
==== Context SETTE tests of the SPITZ12 reference configuration fail. …
- 10:09 Changeset [11888] by
-
Ticket #2197, small changes to improve code structure
- 10:04 Ticket #2329 (Failure of SPITZ12 SETTE tests) created by
-
==== Context SETTE tests of the SPITZ12 reference configuration fail. …
2019-11-11:
- 13:33 Changeset [11887] by
-
Modification of the externals definition for the tools directory in the NEMO development branch for action ENHANCE-05_SimonM-Harmonic_Analysis to point to the corresponding tool development branch (ticket #2175)
- 13:26 Changeset [11886] by
- 12:40 Changeset [11885] by
-
Modification of the externals definition for the tools directory in the NEMO development branch for action ENHANCE-05_SimonM-Harmonic_Analysis to point to the corresponding tool development branch (ticket #2175)
- 10:28 Changeset [11884] by
-
Delete broken symlinks
- 10:26 Changeset [11883] by
-
Mergerd in changes from Chris' working copy (except for symlink changes)
2019-11-08:
- 22:33 Changeset [11882] by
-
Inception of a tool development branch for action ENHANCE-05_SimonM-Harmonic_Analysis (2019 WP), see ticket #2175
- 22:21 Changeset [11881] by
-
Inception of a development branch for action ENHANCE-05_SimonM-Harmonic_Analysis (2019 WP), see ticket #2175
- 21:37 Changeset [11880] by
-
v4.0.1: fix in bdydta, same results but prevents that all subdomains read all bdy
- 21:36 Changeset [11879] by
-
trunk: fix in bdydta, same results but prevents that all subdomains read all bdy
- 18:25 Changeset [11878] by
-
add anisotropy output
- 17:47 2019WP/ENHANCE-05_SimonM-Harmonic_Analysis edited by
-
(diff)
- 17:27 Changeset [11877] by
-
add initialisation and restart of sturcture tensor
- 12:26 Changeset [11876] by
-
ENHANCE-02_ISF_nemo: add timing in the main isf routine + various bug fixes + cosmetic changes
- 12:00 Changeset [11875] by
-
Prevent from 0 vertical index, #2327
2019-11-07:
- 18:18 Changeset [11874] by
-
dev_r11265_ABL: output surface now ABL fields in output.init.nc file when nn_istate=1 (#2131)
- 18:15 Changeset [11873] by
-
dev_r11265_ABL: minor lbc bugfix, cleaning and additional outputs (#2131)
- 17:55 Changeset [11872] by
-
Branch 2019/fix_sn_cfctl_ticket2328. See #2328. Replacement of ln_ctl and activation of full functionality with
sn_cfctl structure. These changes rename structure components l_mppout and l_mpptop as l_prtctl and l_prttrc
and introduce l_glochk to activate former ln_ctl code in stpctl.F90 to perform global location of min and max
checks. Also added is l_allon which can be used to activate all output (much like the former ln_ctl). If l_allon
is .false. then l_config decides whether or not the suboptions are used.
sn_cfctl%l_glochk = .FALSE. ! Range sanity checks are local (F) or global (T). Set T for debugging only sn_cfctl%l_allon = .FALSE. ! IF T activate all options. If F deactivate all unless l_config is T sn_cfctl%l_config = .TRUE. ! IF .true. then control which reports are written with the remaining options
Note, these changes pass SETTE tests but all references to ln_ctl need to be removed from the sette scripts.
- 15:26 Changeset [11871] by
-
Keep up with r11870 of trunk + ref. time set to 1970 in tests/STATION_ASF/MY_SRC/iom.F90
- 12:27 Changeset [11870] by
-
Ticket #2323: open single restart write context for all restart files
- 08:26 New topic on Jobs created by
-
[phd] PhD position on Arctic ocean modelling with NEMO at DMI | Closing 16 Nov. 2019
2019-11-06:
- 17:01 Changeset [11869] by
-
Branch 2019/fix_sn_cfctl_ticket2328. Changes to enable correct functionality for the sn_cfctl%l_mppout and sn_cfctl%l_mpptop options. These changes also introduce a sn_cfctl%l_oasout option to toggle the OASIS setup information (sbccpl.F90, only) which was yet another misuse of ln_ctl. The next step may be to remove most references to ln_ctl altogether and provide a single control mechanism. TBD. See ticket #2328
- 16:43 Changeset [11868] by
-
#2222, 1) Correct sponge mainly for using AGRIF in 2DV domains, 2) Add check of bathymetry consistency
- 14:59 2019WP/ENHANCE-05_SimonM-Harmonic_Analysis edited by
-
(diff)
- 13:08 Changeset [11867] by
-
add EAP option to namelist and changes in icedyn_rhg.F90, icedyn_rhg_eap.F90 is just a copy of icedyn_rhg_evp.F90
- 11:16 Changeset [11866] by
-
Branch 2019/fix_sn_cfctl_ticket2328. Changes to enable correct functionality for the sn_cfctl%l_oceout option. See #2328
- 11:09 2019WP/ENHANCE-05_SimonM-Harmonic_Analysis edited by
-
(diff)